Carrera 20010120 Digital Wireless 2.0 Set Duo Instruction Manual

Carrera 20010120 Digital Wireless 2.0 Set Duo

Product Information

• Specifications
  • Product Name: 20010120 WIRELESS 2.0 SET DUO DIGITAL 132/124
  • Compatibility: Carrera DIGITAL 124/132 EVOLUTION
  • Power Source: AAA Batteries (not included)
  • Number of Hand Controllers Supported: Up to 6 WIRELESS 2.0 Hand Controllers

Product Usage Instructions

• Safety Precautions: Before using the product, ensure to read and understand all safety instructions provided.
• Powering On: Insert AAA batteries into the receiver. The receiver will indicate readiness by the continuous illumination of Segment Display 1.
• Connecting the Receiver: Connect the receiver to either Tower 1 or Tower 2 sockets on the Control Unit marked accordingly.
• Binding Process: Follow the binding process outlined in the manual to connect the hand controllers to the receiver.
• Troubleshooting: In case of any issues, refer to the troubleshooting section in the manual for guidance.

FAQs

• Q: How many hand controllers can be used with this set?
  • A: This set supports up to 6 WIRELESS 2.0 Hand Controllers.
• Q: What type of batteries are required for the receiver?
  • A: The receiver requires AAA batteries, which are not included in the package.
• Q: How can I know if the receiver is ready for operation?
  • A: The receiver signals its readiness by having Segment Display 1 continuously lit up.

Contents Of Package

20010120 WIRELESS 2.0 SET DUO DIGITAL 132/124

Welcome

• Welcome to Team Carrera!
  • This operating manual contains important user instructions and information on the
  • WIRELESS 2.0 System for Carrera DIGITAL 124/132.
  • Please read it carefully, and keep it for future reference. If you have any questions, please contact a specialist retailer, call your national Carrera service hotline, or visit our website: carrera-toys.com
  • Check to ensure that package contents are complete and have not been damaged in transport. The packaging contains important information and should also be kept for future reference.
  • Please note that WIRELESS 2.0 only works in combination with the Carrera DIGITAL 124/132 Control Unit or Black Box. WIRELESS 2.0 can only be used for Carrera DIGITAL 124/132 cars.
  • For information on how to operate the Carrera DIGITAL 124/132 Control Unit or Black Box, refer to the corresponding operating manual.
  • We hope you enjoy your new WIRELESS 2.0 Set Duo for Carrera DIGITAL 124/132.

Safety Information

• ATTENTION! Not suitable for children under the age of 36 months. Choking hazard – contains small parts that can be swallowed. Attention: Pinch hazard in operation.
• ATTENTION! This toy features flashing lights, which can trigger seizures in persons with photosensitive epilepsy.
• This device can be used by children ages 8 and up, as well as persons with physical, sensory, or mental handicaps or limited experience and knowledge, provided that they are supervised or have been instructed on how to use the device safely and understand the resulting hazards. Do not allow children to play with the device.
• Do not allow children to perform cleaning or user maintenance without supervision.
• Instruct the child never to recharge or attempt to recharge non-rechargeable batteries due to the risk of explosion.
• Also refer to the safety information on the basic packaging of Carrera DIGITAL 124/132.

Declaration of Conformity

• Carrera Toys GmbH hereby declares that the “WIRELESS 2.0” radio unit type meets the requirements of Directive 2014/53/EU.
• The full text of the EU Declaration of Conformity is available online at: carrera-toys.com/en/safety-and-quality.

Important notice

Please note that Evolution (analog system) and Carrera DIGITAL 124/132 (digital system) are two separate and entirely independant systems. Carrera WIRELESS 2.0 can only be used for Carrera Digital 124 and Digital 132.

Description

• WIRELESS 2.0 is the wireless racing system for Carrera DIGITAL124 and Carrera DIGITAL 132.
• The 2.4 GHz remote control technology with frequency hopping capability is interference-free and has a range of up to 15 m. With a conventional AAA 500 mA battery or corresponding conventional AAA rechargeable battery, it offers up to 20 hours of play-time.
• WIRELESS 2.0 enables wireless freedom for up to 4 drivers (with Digital 124) or 6 drivers (with Digital 132) on the racetrack.

Before using it for the first time

• Before using the hand-held controller for the first time, insert a conventional AAA battery or rechargeable AAA battery into the controller.
• To do this, unscrew the battery compartment on the bottom of the hand-held controller. Then, insert the battery in the designated direction.
• Finally, screw the lid of the battery compartment back on.
• If using a rechargeable AAA battery, take the battery out of the hand-held controller for charging, and charge it using a conventional AAA charger (not included).
• AAA batteries are not included.

Connecting the receiver

• Connect the WIRELESS 2.0 receiver to one of the two ports on the control unit labeled Tower 1 and Tower 2.
• Refer to the drawing below. It does not matter whether the receiver is connected to the black box 20030344 or the control unit 20030352.
• Only one WIRELESS 2.0 receiver is required to operate up to 6 WIRELESS 2.0 hand-held controllers.

Binding-Prozess

• To control the cars, the hand-held controllers need to be “bound” to the receiver one time.
• To do this, switch on the track.

1. The receiver is ready when the seven-segment display spins around 1.
2. Press the SET button 2 once until the number 1 appears in the seven-segment display 1. The displayed number will later be the address of the car. Press the button again to switch to the next address. Then press the binding button 3 on the top of the hand-held controller. The handheld controller indicates that the binding process has been completed with a flashing LED, while the seven-segment display on the receiver spins around. The binding process is then complete, and the hand-held controller is ready to use.
3. To connect the second hand-held controller, follow the same procedure. Press the SET-button 2 on the receiver twice, until the number 2 appears 1 . Then press the binding button 3 on the second hand-held controller. Once the binding process is complete, the cars can be coded on the corresponding hand-held controllers. To code the cars, set the speed, set the braking behavior and the tank volume, and also refer to the operating manual for the control unit or the car manual.
4. To display the address set for the controller, press the binding button 2 on the top of the controller one time. The LED 1 flashes to indicate the set address. When left idle, the hand-held controller automatically switches to power saving mode after approx. 20 seconds. Press the plunger or lane button to reactivate the controller.

Troubleshooting

In case of malfunctions, please check the following:

• Does the AAA battery have enough charge left?
• Is the controller bound to the receiver?
• Does the controller have a duplicate address assignment?

This product is marked with the symbol for selective disposal of electrical equipment (WEEE). This means that this product must be disposed of by EU Directive 2012/19/EU to minimize environmental damage. For more information, contact your local or regional authorities. Electronic products that are excluded from this selective disposal process are hazardous to the environment and to health due to the presence of hazardous substances.

Warnings

• Non-rechargeable batteries are not to be recharged
• Rechargeable batteries are to be removed from the toy before being charged
• Different types of batteries or new and used batteries are not to be mixed
• Batteries are to be inserted with the correct polarity
• Exhausted batteries are to be removed from the toy
• Supply terminals are not to be short-circuited
• Rechargeable batteries are only to be charged by adults
• Please carefully read the previous chapter with warnings and guidelines on the usage of rechargeable batteries before proceeding.

FCC

FCC statement:
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC statement: This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

• Maximum radio-frequency power transmitted <10 dBm
• Frequency range: 2400 – 2483.5 MHz

References

• Car racing tracks and remote-controlled cars from Carrera.
• Car racing tracks and remote-controlled cars from Carrera.
• Car racing tracks and remote-controlled cars from Carrera.
• Car racing tracks and remote-controlled cars from Carrera.
• Car racing tracks and remote-controlled cars from Carrera.
• Car racing tracks and remote-controlled cars from Carrera.
• Car racing tracks and remote-controlled cars from Carrera.
• Car racing tracks and remote-controlled cars from Carrera.
• Car racing tracks and remote-controlled cars from Carrera.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>