Outsunny 862-067V70GY Sun Lounger Set Instruction Manual
- June 1, 2024
- Outsunny
Table of Contents
Outsunny 862-067V70GY Sun Lounger Set
Product Information
- Specifications:
- Model: IN221100001V02_GL
- Part Numbers: 862-067V00, 862-067V70, 862-067V71
- Dimensions: 120 inches
- Duration: 120 minutes
Product Usage Instructions
- Pre-Assembly:
- Confirm all components are present before starting assembly.
- Place all parts on a clean and smooth surface to prevent damage to your furniture.
- Assembly:
- Assemble the furniture with the help of 2 persons or more for safety.
- Avoid confusing similar screws to prevent assembly errors.
- Do not fully tighten bolts until all parts are connected.
- Periodically check all fittings and re-tighten as necessary to ensure stability.
FAQs
- Q: Can I assemble the furniture alone?
- A: It is recommended to assemble the furniture with at least 2 persons for safety and ease of assembly.
- Q: How often should I check and re-tighten the fittings?
- A: Periodically check all fittings and re-tighten them as necessary, especially after initial assembly and periodically thereafter to maintain stability.
Dear customer,
- Thank you for purchasing this product.
- So that your appliance serves you well, please read all the instructions in this user’s manual.
- If you have any questions, please contact our customer care centre.
Our contact details are below:
- UK
PACKING DETAILS
PACKING DETAILS: TOTAL 2 BOXES
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only for domestic use
- Use tips:
- Put the chair stably on a flat floor.
- Mount the garden chairs in the shelter of the weather.
- Stay away from open flames.
- Don’t hang anything in the structure.
- Avoid the overload at the anchors/structure.
- It is advised that don’t stay on the chairs when there is a storm.
- Do not use in adverse weather conditions and cover furniture when not in use.
- Precautions before assembly:
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
- Maintenance:
- Clean with a soft fabric.
- Regularly remove leaves and/or water collected on the canvas.
- Check the chair regularly.
- Storage conditions:
- The fabric should be stored completely dry, and in a clean and dry place to avoid the risks of mould.
- Maintenance:
- Don’t use this product if the seat cloths, cloth cushions or tarpaulins are aging, and contact our customer service.
- Caution with the risks of pinching or cuts during assembly.
- The manufacturer declines all responsibility in case of damages due to a bad installation or due to weather.
Operation Instructions
- Please confirm that all components are present before beginning assembly.
- For the protection of your furniture, place all parts on a clean and smooth surface to prevent any damage.
- Please assemble the furniture by 2 persons or more.
- Do not confuse similar screws.
- Do not tighten bolts fully until all parts are connected!
- Please periodically check all fittings and re-tighten as necessary.
PARTS
INSTALLATION
MORE INFO
IMPORTER:
- Imported by Aosom LLC
- 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- MADE IN CHINA
- https://quefairedemesdechets.fr.
- SPANISH AOSOM, S.L.
- C/ ROC GROS, N° 15. 08550, ELS HOSTALETS DE
- BALENYA, SPAIN.
- B66295775
- WWW.AOSOM.ES.
- ATENCIONCLIENTE@AOSOM.ES.
- TEL: 931294512
- HECHO EN CHINA
- IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>