ReasonRemedy SCP09 Capillary Blood Sample Collection Pack Instructions
- June 1, 2024
- ReasonRemedy
Table of Contents
ReasonRemedy SCP09 Capillary Blood Sample Collection Pack
Specifications
- Product Name: Capillary Blood Sample Collection Pack
- Sample Type: Capillary whole blood
- Storage: Keep dry and away from direct sunlight
- Sample Return: Same day return or refrigerate at 2-8°C
Product Usage Instructions
Indications for Use
This sample collection pack is designed to collect human capillary whole blood
samples for testing purposes. It can be used by both lay persons and
healthcare practitioners. Special considerations apply to pediatric patients.
Pack Storage
Ensure the pack is kept dry and away from direct sunlight. Once components
are opened, they should be used immediately.
Warnings
- Read instructions carefully to avoid inaccurate results.
- Do not use equipment components other than those supplied.
- Do not use the pack beyond the expiry date.
- Avoid using damaged pack components or those exposed to heat/humidity.
- Use only finger-prick blood samples as specified.
- Clean spills promptly with appropriate disinfectant.
Contents of the Sample Collection Pack
- 1x Clam-Pack Container
- 1x Pre-paid Return Envelope
- 1x Instruction Leaflet
- 1x Sample Information Form
- 1x Blood Collection Tube
- 1x Sample Transport Tube
- 3x Retractable Lancets
- 3x Plasters
- 3x Alcohol Swabs
- 3x Sample Labels
Sample Collection Important Information – Please Read Before Starting
- Check expiry date on the pack to ensure validity.
- Ensure proper hydration for sufficient blood sample.
- Remove all contents from the pack and verify their presence.
- Blood collection may take time; plan accordingly.
- Start sample collection immediately once initiated.
- Provide enough blood to fill the tube to the specified level (100 microliters).
FAQ
What should I do if I cannot return the sample on the same day?
If you cannot return the sample on the same day, store the blood sample in the
fridge at 2-8 degrees Celsius and post it the next day.
Can I use equipment components not supplied with the pack?
No, using any other equipment components will invalidate the results. Stick to
the components provided in the pack for accurate testing.
What happens if I miss collecting the blood sample immediately?
If you miss collecting the sample immediately after starting, it may affect
the accuracy of the results. Try to collect the sample promptly once
initiated.
A collection of sterile and non-sterile devices and materials for the
collection and mailing of human capillary whole blood sample to Cambridge
Nutritional Sciences (CNS) for in vitro diagnostic testing.
Store at 15-25ºC. DO NOT FREEZE.
For in vitro diagnostic use only.
INTENDED USE
This sample collection pack is intended to be used to collect a human
capillary whole blood sample (from a finger using a sterile retractable
lancet) for testing.
The pack can be used by lay persons or by healthcare practitioners. Paediatric
patients (up to and including 16) shall have their samples collected by a
healthcare practitioner or an adult.
INDICATIONS FOR USE
Do not use this sample collection pack if you are taking immunosuppressants
(eg. steroids), cancer therapies, antibody therapies, suffer from clotting
disease, or are pregnant or breastfeeding.
PACK STORAGE
Before use, store pack at 15-25ºC.
DO NOT FREEZE.
Keep dry and away from direct sunlight.
KEEP OUT OF REACH OF CHILDREN.
Once you open any of the components, use them immediately.
SAMPLE TYPE
Capillary whole blood
Finger-prick 100μL (microlitres) sample volume. No other sample types may be
used as these have not been validated.
The blood must be collected into the supplied blood collection tube and returned on the same day. If this is not possible, the blood sample should be stored in the fridge 2-8 degrees Celsius and posted the next day.
WARNINGS
Read the instructions carefully before performing the sample collection.
Failure to follow the instructions may lead to inaccurate test results.
- Use any of the other equipment components except those supplied with the pack will invalidate the results.
- The components are intended for single use only.
- Do not use the pack beyond the expiry date.
- Do not use if any pack components are damaged.
- Do not use if the product has been exposed to excessive heat or humidity.
- Do not use any other specimen type than the finger-prick blood sample.
- Clean up spills immediately and thoroughly using an appropriate disinfectant.
KEEP OUT OF REACH OF CHILDREN.
CONTENTS OF THE SAMPLE COLLECTION PACK
Before proceeding, check that all the contents required to perform the blood collection are present in the pack.
SYMBOL LEGEND
The following symbols have been used within the labelling of this product.
SAMPLE COLLECTION
IMPORTANT INFORMATION – PLEASE READ BEFORE STARTING
-
Check expiry date on front of pack to ensure pack is valid. YYYY-MM
-
To ensure sufficient blood sample,make sure you are well hydrated or test may have to be repeated.
-
Remove contents from pack. Read procedure carefully and check all contents are present.
-
Blood collection may take some time, so please allow for this.
-
Once you start the sample collection, sample must be taken immediately
-
You will need to provide enough blood to fill blood tube to the line (100 microlitres).
PREPARING FOR THE SAMPLE COLLECTION
Failure to provide the information requested, or unclear handwriting, means the sample will be rejected and testing delayed. -
Fill out your name and date of birth on the labels provided using CAPITAL LETTERS. A spare label is provided.
-
Fill out all requested details on sample information form using CAPITAL LETTERS.
-
Wash your hands using soap and warm water as this will help encourage blood flow.
-
To increase blood flow to the hands, if possible, stand up, hang your hands down below heart level, and clench and unclench your hands several times.
-
Pull lid off the blood collection tube and put tube and lid in front of you. This is the tube you will collect your blood in.
-
Select the side of third (middle) or fourth (ring) finger of your non-writing hand. Pricking the side of the ball of the finger is more comfortable and provides a better sample.
-
Clean selected finger with alcohol swab. Allow some time for the finger to air dry. DO NOT touch the finger to check it is dry
-
Pull off protective cap from lancet.
-
Place raised platform end of lancet onto finger and firmly push down and hold lancet in place for 2 seconds. A slight prick may be felt. Discard the used lancet.
-
Gently massage finger in direction of puncture site to begin collecting droplets of blood.
-
Place finger with blood over the edge of blood collection tube and scrape into tube.
-
Tap base of the tube on a hard surface so blood collects at bottom of the tube.
-
Clean and prick another finger using one of the other alcohol swabs and lancets provided and follow steps 12-18.
-
Fill blood collection tube to the line on side of the tube (100 microlitres).
-
When blood has been collected, push lid onto blood collection tube until you hear a click.
-
Wipe finger with alcohol swab or tissue and use plaster supplied to cover puncture site.
-
Apply completed sample label to blood collection tube,lengthways, as shown in the image.
-
Apply completed sample label to transport tube.
-
Place blood collection tube inside transport tube. Do not remove absorbent cotton pad.
-
Twist the lid onto the transport tube to secure the sample.
SENDING YOUR SAMPLE TO THE LAB -
Place following items into clampack:
- sample transport tube containing blood collection tube
- completed sample information form
-
Securely close clam-pack and pack into the pre-paid return envelope.
-
Please return your sample within 24 hours of collection. Store in fridge until posted.
-
Put used and unused lancets in a ‘sharps bin’, but if you cannot, they can go in your household bin.
If you find it hard to obtain a blood sample, please contact:
REASONREMDY or CNS.
IMPORTANT CHECKLIST
- Have you filled in your sample information form?
- Have you completed label for blood collection tube?
- Have you completed label for transport tube?
- Have you put blood collection tube into transport tube?
- Have you put blood collection tube with completed sample information form inside clam pack?
- Have you put the clam-pack inside the pre-paid envelope?
You’re now ready to post
577-31 V5 OCTOBER 2021
CAMBRIDGE NUTRITIONAL
SCIENCES
Eden Research Park Henry Crabb Road, Littleport
Cambridgeshire, CB6 1SE
United Kingdom
+44(0)1353 863279
info@camnutri.com
www.camnutri.com
AN ISO 9001 AND ISO
13485 CERTIFIED
COMPANY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>