Aleene s 23473 Fabric Fusion Permanent Fabric Adhesive Instructions
- June 1, 2024
- Aleene s
Table of Contents
Aleene s 23473 Fabric Fusion Permanent Fabric Adhesive
Product Information
Specifications
- Product Name: Fabric Glue
- Usage: Adhering fabric or embellishments to garments
- Drying Time: 2-4 hours to fully cure, washable after 48 hours
- Cleanup: Water cleanup when wet
- Dry Time Estimate: 24-30 minutes for a 3-millimeter coating at 70-73 degrees Fahrenheit
Product Usage Instructions
- Testing: Always test for the best results.
- Prewash: Prewash garment (do not use fabric softener).
- Application: Apply an even coat of glue to the fabric or embellishment. Press onto the garment. If needed, hold it in place with tape or pins until the glue is set.
- Drying: Let dry for 2-4 hours to fully cure. Washable after 48 hours. Turn inside out, wash on a gentle cycle; and dry in low temp dryer.
- Cleanup: Water cleanup when wet.
- Dry Time Variability: Dry time will depend on how much glue was used and the temperature and humidity level in your area. Thicker applications will dry at a slower rate.
FAQs (Frequently Asked Questions):
Q: How long does it take for the glue to dry?
A: The glue typically takes 2-4 hours to fully cure, but it is washable after 48 hours. The dry time can vary based on the amount of glue used and environmental conditions.
Q: Can the garment be washed immediately after applying the glue?
A: It is recommended to wait for 48 hours before washing the garment after applying the glue. Washing before that might affect the adhesive strength.
Q: How should I store the fabric glue?
A: Store the fabric glue in a cool, dry place away from direct sunlight and heat sources. Ensure the cap is tightly closed to prevent drying out.
Instructions
- Always test for the best results. Prewash garment (do not use fabric softener).
- Apply an even coat of glue to the fabric or embellishment. Press onto a garment. If needed, hold it in place with tape or pins until the glue is set.
- Let dry for 2-4 hours to fully cure. Washable after 48 hours. Turn inside out, wash on a gentle cycle; and dry in low temp dryer.
- Water cleanup when wet.
- Dry time will depend on how much glue was used and the temperature and humidity level in your area.
- A general dry time estimate for this glue is 24-30 minutes based on testing with a 3-millimeter coating at 70-73 degrees Fahrenheit.
- Thicker applications will dry at a slower rate.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>