RUNVA Wireless Remote Control Instructions

Wireless Remote Control Instructions

Wireless Remote Control

RUNVA wireless remote works lets you operate your winch from up to 50 ft without cables or switches. Just press the remote transmitter and you’re ready to operate your winch Start, stop, in or out.

• Remote range up to 50 ft.
• Transmitter equipped with long life.
• battery and power saver circuit.
• transmitter & receiver
• The visual indicator light shows remote operation.
• Additional transmitters are available to operate the receiver.
• Installs in minutes.
• The transmitter replacement battery is readily available.

WARNING: The Wireless Remote is designed for use on front-mount self- recovery winches only. The remote is not designed for and should not be used on winches or hoists in industrial applications (commercial car haulers/carriers, wreckers, cranes, etc.) or for any other remote-controlled applications.

**Type:

**

RWRC1—2—3-4-5:

1. Signed as 01, 02. “01” : Code learning Type; -02″ : Code Fixed.
2. Using Range admitted. Signed as E, C. “E” : European Using Style: “C” Common style, this letter is always left out;
3. Power Voltage, Signed as 12VDC or 24VDC. ®: Connector Style, using solely out of the winches control box. Signed as 03, 04. “03” : three cores connector; “04” : four cores of connector.
4. mount type, Signed as 05. “05” : small remote can fix in the winches control box.

Part List:

1. one transmitter.
2. one receiver with three or four cores of line with a connector.

Installation and operating instructions:

There are two kinds of different connect way for the reason of different kinds winches’ solenoid female connector. You can choice a suitable type of wireless remote control as RWRC– 03 or RWRC -04. showing as the following connection drawing. RWRC — 03: While you insert the receiver plug to the winches’ solenoid female connector, you shold connect the earth line to the battery negative. Be sure of the earth line connection exactly, then you can operate your winch by press the button on the transmitter. RWRC 04: While you are ready to operate a winch, just connect the four cores of the recever to the winches’ solenoid female connector. And then you can operate your winch by press the button on the transmitter NOTE: Make sure one of the four pole receptacle is connected to the earth.
’03”,“04″connection drawing:

There is a small remote can be fixed in the winches control box: RWRC 05: while you fixing it according to the drawings showing as follows:

We suggest operating your winch as follows:

1. Disengage the clutch of your winch.
2. Pull out the winch wire rope about 1.5 meters.
3. Reengage the clutch of your winch.
4. Insert the plug of the remote control receiver into the winches’ solenoid control box female connector, if your wireless remote control is 03 type, you should properly connect the black earth line to the battery negative.
5. Put your receiver at a certain place.
6. Keep the antenna of the receiver out and straight.
7. Pull out the antenna of the transmitter, move down the cover of your transmitter, bare out the control button.
8. Press the button, you can operate your winch start, stop, in, and out.

Trouble Shooting:

The motor turns, but Winch
does not work,| Defective winch.| Check the winch Operating instructions.
Motor does not turn, but you
can hear “Click” sound in the
receiver| Receiver Loose connections to the winch.| Reinsert all the way.
False Earth line connection| Ensure the earth connections.
Defective winch.| Check the winch Operating instructions.
Motor runs in one direction
only| Receiver Loose connections to the winch.| Reinsert all the way.
Defective winch.| Check the winch Operating Instructions.
No actions| The receiver and transmitter does not match.| ‘0 1’ Type : Code learn. ’02” Type : return to the manufacturer to rematch.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>