Sami WS-2376 Wearable Smart Watch User Manual

: June 13, 2024
: Sami

Table of Contents

Sami WS-2376 Wearable Smart Watch
Product Information
Product Usage Instructions
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SAMI-WEARABLE-LOGO

Sami WS-2376 Wearable Smart Watch

Product Information

Product Name:
Sami Wearable WS-2376

Description: The Sami Wearable WS-2376 is a wearable device equipped with a full touch display screen. It supports full screen touch control and features a Bluetooth (BLE 5.0) touch screen, TFT LCD 1.50 full touch screen with glass, a built-in vibrating motor, a built-in heart rate sensor, a built- in gravity sensor, gesture control to light up the display screen, a built-in Alexa, an aluminum middle frame, and is waterproof up to 5 ATM.

Technical Specifications

Declaration of Conformity – EMC 2014/30/EU
Declaration of Conformity – LVD 2014/35/EU
Standard CE (RED): DIRECTIVE 2014/53/EU
Standard RoHS: 2011/65/EU (RoHS) Restriction of Hazardous Substance
Standards Applied:
- EN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
- EN 62479:2010
- EN 301 489-1 V2.1.1 (2017-02)
- EN 301 489-17 V3.1.1 (2017-02)
- EN 300 328 V2.1.1 (2016-11)

Product Usage Instructions

How to Control:

In the home page, slide the screen as shown in the diagram to enter the different interfaces.
To select/enter a menu, short tap on the icon. In submenus, slide from left/right or top/bottom to go to the next/previous page.
To return to the previous interface, short press the side button.
In the home page, long press the screen for a few seconds until the screen zooms out. Then, slide the screen up or down and select the digital clock style you prefer to change it.

Getting Started:
Important: To enable notifications from different software applications such as WhatsApp, Facebook, Skype, and Twitter, you need to turn on the notifications manually on the VeryFit App.

On the VeryFit homepage, select the Device icon (situated on the right bottom of the screen).
Select WS-2376 and then select Message Notification.
Turn on Allow Notification and enable notifications for all the desired applications. Confirm by clicking on the icon located on the top right.

For iPhone:

Install the BT Connection App (VeryFit).
Follow the same steps mentioned above to enable notifications for different applications.

Sports Mode:
To enter Sports Mode, select the sports icon and select the desired sport.

Data Sync:
Data can be synced from the wearable to the smartphone using the VeryFit APK/App. Make sure Bluetooth is paired between the device and smartphone for synchronization to occur.

Important Note: This product is not a medical instrument, so the values provided are approximate.

Thank you for purchasing the Sami wearable WS-2376. Read the instructions carefully to obtain optimum results and preserve it for future reference.

DESCRIPTION OF THE WEARABLE

$Sami-WS-2376-Wearable-Smart-Watch-FIG- $1$$

CONTENTS
Wearable, USB magnetic charging cable, instruction manual.

CHARGING
Connect the device to a computer or laptop with the USB Magnetic cable for charging. Put in contact the magnetic end of the USB cable with the charging points positioned in the back of your device. Kindly use only the USB cable included with the wearable. If you use a power adapter for charging, the output of the power adapter should be 5V, 1A. Charging time: 1-2 hours approx. Please charge the device fully before using it. Take care with the magnet side of the cable, if you connect to the AC and you have contact with a metal surface, you may damage the charging cable.

2376

HOW TO POWER ON / POWER OFF?

To turn ON the smart band, long press the side button for a few seconds. The side button is situated in the right of the of the screen.
To turn OFF the smart band, while the device is in the home screen menu, slide on the screen from the right to the left and then from the bottom to the top to change between the different menus of the device. Tap on the settings icon to enter in the settings menu, slide again in the screen from the bottom to the top until you see the shutdown icon, tap in the icon and confirm to shutdown to make it power off.

HOW TO CONTROL?
This device is equipped with a full touch display screen, it supports full screen touch control.

In the home page slide the screen as in the following diagram to enter to the different interfaces :

TOUCH SCREEN $Sami-WS-2376-Wearable-Smart-Watch-FIG- $3$$
BUTTON PRESS $Sami-WS-2376-Wearable-Smart-Watch-FIG- $4$$

Short tap in the icon to select/enter in that menu. In the submenus slide from left/right or top/bottom to go to the next/previous page. Short press the side button to return to the previous interface.
In the home page, long press the screen for a few seconds until the screen zooms out, then slide the screen up or down and select the digital clock style you prefer to change it.

GETTING STARTED:

For Android

How to obtain the BT Connection APK (VeryFit)
Search for the VeryFit APP in the Play Store; download it and install it in your Android smartphone, or go to our website www.sami.es and download the application.
Installation of the VeryFit APK. When installing the VeryFit application on your Android, you must allow all the Application Permissions, allow this VeryFit app auto run. The first time you run this VeryFit app, it will ask you to Enable Notifications, please tap OK and tap the VeryFit and confirm OK. You must tap OK/Allow/Pair/Yes/Confirm for any pop-up request. On your Android permission management, allow all application permissions.
How to make the wearable pair with your Android smart phone?
- First, turn on the Bluetooth of your Phone.
- Second, run the VeryFit app on your Phone, on the home page of VeryFit, find the pairing request by the setting all your values requested and then select “watch”. You must have the screen of the watch on and the APP will search for new Bluetooth device(s), when the available Bluetooth device displays, please select WS-2376 (the BT name of this device). Select the device on the app to make it pair. Select “confirm tick” on the watch and the pairing will be finished in a few seconds. When you pair for the first time, the VeryFit app will ask you to o enable GPS and Bluetooth, and authorize VeryFit to get access to the location service while using the app. Please accept all the requests for the correct functioning of the device. When you finish select OK/Confirm/Allow for any pop-up request.
In the case that on the watch you have the QR CODE on the screen, then in the APP VeryFit click the icon of scan on the top left of the menu and scan the qr code of the watch with the camera.
- Important : To enable all notifications of different softwares such as WhatsAPP, Facebook, Skype, Twitter, you will need to turn on the notifications on the APP manually. On the VeryFit homepage, select the icon “Device” (situated on the right bottom of the screen), select “WS-2376” select “message notification” turn on “Allow notification” and turn on all the APP notifications you want to active. To confirm you must click on the icon located on the top right.
For iPhone
How to obtain the BT Connection APP (VeryFit) Search for the VeryFit APP in the APP Store; download it and install it in your iOS smartphone
Installation of the VeryFit APP.
When installing the VeryFit application on your iOS, you must allow all the Application Permissions, allow this VeryFit app auto run.
The first time you run this VeryFit app, it will ask you to Enable Notifications, please tap OK and tap the VeryFit and confirm OK. You must tap OK/Allow/Pair/Yes/Confirm for any pop-up request. On your Android permission management, allow all application permissions.
How to make the wearable pair with your Android smart phone?
First, turn on the Bluetooth of your Phone.
Second, run the VeryFit app on your Phone, on the home page of VeryFit, find the pairing request by the setting all your values requested and then select “watch”. You must have the screen of the watch on and the APP will search for new Bluetooth device(s), when the available Bluetooth device displays, please select WS-2376 (the BT name of this device). Select the device on the app to make it pair. Select “confirm tick” on the watch and the pairing will be finished in a few seconds. When you pair for the first time, the VeryFito app will ask you to o enable GPS and Bluetooth, and authorize VeryFit to get access to the location service while using the app. Please accept all the requests for the correct functioning of the device. When you finish select OK/Confirm/Allow for any pop-up request.
In the case that on the watch you have the QR CODE on the screen, then in the APP VeryFit click the icon of scan on the top left of the menu and scan the qr code of the watch with the camera. Now you can start using your desired functions of the smart band.
Important : To enable all notifications of different softwares such as WhatsAPP, Facebook, Skype, Twitter, you will need to turn on the notifications on the APP manually. On the VeryFit homepage, select the icon “Device” (situated on the right bottom of the screen), select “WS-2376” select “message notification” turn on “Allow notification” and turn on all the APP notifications you want to active. To confirm you must click on the icon located on the top right

PRODUCT FEATURES

BLUETOOTH (BLE 5.0)
TOUCH SCREEN. TFT LCD 1.50″ full touch screen with glass
BUILT IN VIBRATING MOTOR
BUILT IN HEART RATE SENSOR
BUILT IN GRAVITY SENSOR
GESTURE CONTROL TO LIGHT UP THE DISPLAY SCREEN
BUILT IN ALEXA
ALLUMINIUM MIDDLE FRAME
WATER PROOF 5 ATM

Time/Date/Battery displaying
Health data
Sports – different sport modes including Outdoor Run/Indoor Run/Outdoor walk/Indoor walk /Hiking/Outdoor cycle/Cricket/Yoga/Indoor cycle/Workout/Pool swim/ Open water swim/Rower/Elliptical.
Enter to the sports mode by selecting the sports icon, select the sport type enter the sports countdown automatically. During sports, to pause sports short press the side button, and to restore sports short press the side button again. To end up sports long press the icon on the screen and confirm end . $Sami-WS-2376-Wearable-Smart-Watch-FIG- $6$$
Amazon alexa voice function
Exercise record
Heart Rate
Blood oxygen
Stress level measure
Breathe Training: Helps you regulate your breathing and relax your mood.
Sleep
Weather forecast
Music control – control music via bt on your mobile. Watch cannot playback or store music
Stopwatch
Alarm Clock
Timer
Find phone
Settings: Raise wrist to on watch/Do not disturb/Watch face/Dimming/Power off/Restart/Reset/ About

Data can be sync from the wearable to the smart phone on the VeryFit APK/APP. Your smart phone will synchronize when the Bluetooth is paired with this device.

FUNCTIONS

PHONE CALL NOTIFICATION vibrating reminder for incoming phone calls and display on screen. This function needs to be turned on manually at the VeryFit APK/APP.
MESSAGE NOTIFICATION vibrating reminder for incoming messages and display on screen, including SMS, WhatsApp, Facebook, Twitter, Skype messages, etc. This function needs to be turned on manually at the VeryFitPro APK/APP. Memory for 10 messages.
CLOCK SCREENS (Different home digital clocks) – In the home screen of the smart band, long press the screen for a few seconds to change the style of the digital clock. You can also select the cloud dials from the APK/APP
SLEEP MONITOR supported on the watch and VeryFit APK/APP
ALARM CLOCK supported on the watch and VeryFit APK/APP
FIND THE DEVICE (Looking for your mobile phone) supported on the VeryFit APK/APP
SEDENTARY REMIDER (REMIND TO MOVE) –set it on the VeryFit APK/APP
Do Not Disturb Mode – set it on the VeryFit APK/APP
GESTURE CONTROL (Raise your hand to light up the screen).
GPS MAP TRACE : view it on the BT APP/APK VeryFit when you do your sports.
ALEXA : firstly on the APP/APK Veryfit you need click on amazon alexa and log in. now on the watch once you slide towards to right, you will see the icon of alexa and you can use the voice commands just by talking.

THIS IS NOT A MEDICAL INSTRUMENT, SO THE VALUES ARE APPROXIMATE

CLEANING:
In order to avoid any damage on the plating or printing of your wearable please do not use any chemical product for cleaning such as alcohol 96º. We recommend you to use a slightly wet cloth.

TECHNICAL SPECIFICATIONS: