KOPFJAGER KJ86009 Reaper Hellbound Shooting Rest User Manual

KOPFJAGER KJ86009 Reaper Hellbound Shooting Rest

Product Information

Technical Specifications

• Brand Name: Reaper
• Model Name: Hellbound Shooting Rest
• Category Name: Shooting Rest
• SKU Number: KJ86009
• UPC Number: [UPC Number]
• Mount Type: 3/8-16 Threaded
• Dimensions: 8x8x6 in / 203.2×203.2×152.4 mm
• Vise Width Range: 0 – 2.875 in / 0 – 73 mm
• Vertical Rotation Angle: 87 Deg Down / 22 Deg Up
• Material: Aluminum 6061-T6 / Plastic
• Weight: 1.75 lbs / 790 g
• Tension Adjustment: Yes

Features

• Locking 0 to 2-7/8 Grip
• Protective Grip Knurling
• 3/8-16 Threaded Mount Type
• Adjustable Grip with Tension Adjustment
• Drag Adjustment Screw for Tilt and Pan

Included Accessories

• – [List of included accessories]

Assembly Instructions

Attaching/Mounting to Tripods or Other Mounting Fixtures
The Reaper Hellbound is equipped with a drag adjustment knob that allows tension adjustments when mounting it to tripods or other fixtures.

1. Tighten the drag adjustment knob completely.
2. Screw the unit onto the tripod clockwise until the silver mounting base cannot rotate.
3. To remove, tighten the drag adjustment knob and rotate the unit counter-clockwise to loosen.

Drag Adjustment Screw for Tilt
The drag adjustment screw enables vertical tilt tension adjustments. Use the supplied hex key to rotate clockwise to tighten or counter-clockwise to loosen. Avoid overtightening to prevent damage.

Drag Adjustment Screw for Pan
The drag adjustment knob can modify horizontal resistance. Rotate clockwise to increase resistance and counter-clockwise to decrease. Avoid overtightening to prevent damage.

Securing a Stock/Chassis in the Grip
To secure a stock or chassis, loosen the grip adjustment knob and place the firearm’s forestock into the grip just forward of the magazine compartment. Ensure moving parts are not covered. Tighten the grip adjustment knob to secure firmly.

Storage Instructions
Properly store the Reaper Hellbound Grip when not in use. Run the grip in and out along the screw length, and visit the website for warranty details and additional information.

Frequently Asked Questions (FAQ)

• Q: How do I adjust the tension on the Reaper Hellbound Grip?
  A: The tension can be adjusted using the drag adjustment knob for mounting and drag adjustment screws for tilt and pan functions.

• Q: Can I mount the Reaper Hellbound Grip on any tripod?
  A: The grip is compatible with tripods that support a 3/8-16 threaded mount type.

• Q: What is the material of construction for the Reaper Hellbound Grip?
  A: The grip is made of Aluminum 6061-T6 and Plastic components.

Reaper Hellbound Shooting Rest

GENERAL DESCRIPTION

GENERAL DESCRIPTION|
---|---
Brand Name| Kopfjäger
Model Name| Reaper Hellbound
Category Name| Grips / Mounts
SKU Number| KJ86009
UPC Number| 810119014504
TECHNICAL SPECIFICATIONS|
Mount Type| 3/8”-16 Threaded
Dimensions, in/mm| 8x8x6 / 203.2×203.2×152.4
Vise Width Range, in/mm| 0 – 2.875 / 0 – 73
Vertical Rotation Angle| 87 Deg Down / 22 Deg Up
Material| Aluminum 6061-T6 / Plastic
Weight, lbs/g| 1.75 / 790
Tension Adjustment| Yes
INCLUDED ACCESSORIES|
| Reaper Hellbound Grip
| Hex Key
| Kopfjäger Sticker
| Manual

FEATURES

• Lightweight Construction
• Full Tilt, Pan, Clamp Lockup
• Smooth 360° pan & 111° tilt range (22° up, 87° down)
• Tensioning screw for fine tuning tilt movement to user preference.
• Offset grip design for magazine changes during mounted operation & easy manipulation.

DIAGRAM

1. Control Arm
2. Mounting Base
3. Drag Adjustment Screw (Tilt)
4. Drag Adjustment Knob (Pan)
5. Hinge Block
6. Grip Adjustment Knob
7. Fixed Grip
8. Adjustable Grip
9. Saddle Base / Clamp

ASSEMBLY

To assemble your Kopfjäger Reaper Hellbound, simply screw the control arm into the saddle base/clamp. The control arm is reverse threaded. Do not overtighten. Locking the Reaper Hellbound Grip into position takes minimal torque. Overtightening the control arm may damage your Reaper Hellbound Grip. Your Reaper Grip is now assembled and ready to attach to any 3/8-16” threaded tripod or other mounting fixture like the Kopfjäger Ambush.

ATTACHING / MOUNTING TO TRIPODS OR OTHER MOUNTING FIXTURES

• The Reaper Hellbound is equipped with a drag adjustment knob that will increase or decrease tension of the base when attaching/removing the Reaper Hellbound Grip from a tripod or other mounting fixture.
• To mount the Reaper Hellbound Grip to a tripod, tighten the drag adjustment knob all the way and screw your unit onto your tripod in a clockwise manner. You should not be able to rotate the silver mounting base.
• Loosen the drag adjustment knob to allow your Reaper Hellbound to freely pan from left to right. It should remain secure in its threading. Check rotation by slightly rotating it in either direction before rotating the Reaper Hellbound 360°. It should rotate smoothly and freely and should not come loose.
• To remove your Reaper Hellbound from your tripod, tighten the drag adjustment knob all the way and rotate the unit in a counter-clockwise manner to loosen it.

DRAG ADJUSTMENT SCREW FOR TILT

• The Reaper Hellbound Grip is equipped with a drag adjustment screw which allows tension adjustments to the vertical tilt (up/down) function of the grip.
• Insert the supplied hex key into the drag adjustment screw (see figure) and rotate clockwise to tighten the tilt shaft or rotate the screw counterclockwise to loosen it.
• Do not overtighten the drag adjustment screw. Doing so may damage your Reaper Hellbound Grip.

DRAG ADJUSTMENT SCREW FOR PAN

• The drag adjustment knob used to install the Reaper Hellbound Grip onto a tripod can be used to modify tension adjustments to the pan (left/right) function of the grip.
• Rotate the drag adjustment screw clockwise to increase horizontal resistance, and rotate counter-clockwise to decrease it.
• Do not overtighten the drag adjustment screw.
• Doing so may damage your Reaper Hellbound Grip.

SECURING A STOCK / CHASSIS IN THE GRIP

• To secure a stock or chassis in the Reaper Hellbound Grip, loosen the grip adjustment knob and set your firearm’s forestock into the grip just forward of your magazine compartment. Make sure your firearm’s ejection port and/or any moving parts are not covered. Hold the rifle so the stock or chassis is resting completely at the base of the grip.
• Tighten the grip adjustment knob until the rifle is firmly secured between the two orange grip pads.

MAINTENANCE

• Proper maintenance of the Kopfjäger Reaper Hellbound Grip is recommended to ensure longevity.
• It is recommended that when the grip becomes dirty it is wiped down and cleaned with an all-purpose cleaner on all external surfaces.
• To clean the grip drive screw, use a rag and wipe clean the surface of any dirt and debris. Once clean, use a penetrating lubricant and lightly coat the screw as needed.
• Do not use lubricants or grease on the shaft that holds the mounting base to the saddle base/clamp.
• Do not attempt to disassemble any components of the Reaper Hellbound Grip.

STORAGE

When not using the Reaper Hellbound Grip proper storage is recommended. This includes:

• Removal of any firearm from the grips, keeping the grips loose from each other. This will help not have any deformation of the grip pads when not in use.
• Removal of the Reaper Hellbound Grip from the tripod.
• Loosen any of the drag screws and knobs. This will help extend the lifespan of the nylon drag inserts.

WARNING
Before handling the Reaper Hellbound Grip, read and understand the contents of your tripod manual, as well as this Kopfjäger Reaper Hellbound Grip manual. Follow these safety precautions:

• Never leave a loaded firearm in the grip without maintaining positive physical control over the shooting system.
• Do not exceed your tripod’s maximum load capacity. (see your tripod manual.)
• Ensure the Hellbound Reaper Grip is fastened tightly to your tripod.
• Ensure your firearm is gripped tightly and is secured at the bottom of the grip assembly.
• Always remove your firearm and accessories from the Hellbound Reaper Grip during setup and before transporting.

TROUBLESHOOTING

• IF THE GRIP KNOB FEELS GRITTY OR DOESN’T TURN SMOOTHLY:
  • Wipe the drive screw with a rag and apply a penetrating lubricant to the screw.
  • Run the grip in and out the length of the screw. A second application may be required.

If this does not fix the issue, please call the Kopfjäger customer service team at 1-817-587-6149.

NOTES
Please visit www.kjrests.com for warranty details and information.

www.kjrest.com

References

• Rifle Tripod and Gun Rest for Hunting and Shooting – kjrests.com | Kopfjäger
• Rifle Tripod and Gun Rest for Hunting and Shooting – kjrests.com | Kopfjäger

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>