TAVISTOCK pa_3421652 Soft Close with Quick Release Toilet Seat Instruction Manual

TAVISTOCK pa_3421652 Soft Close with Quick Release Toilet Seat

Product Information

Specifications

• Product Name: Soft Close Quick Release Secure Fix Toilet Seat
• Dimensions: 445mm – 460mm (max), 400mm (min), 376mm general seat dimension, 54mm (min) – 172mm (max) fixing adjustment

Product Usage Instructions

Top Fix Installation

1. Push top fix inserts into toilet pan holes.
2. Using the anchor template provided, place over the two pins, ensuring it’s parallel to the back of the pan with a distance of 430mm (+/-3) from the front of the pan to the centre line of the template.
3. Tighten the fixing screws with a screwdriver and remove the template.
4. Add the cover cap and click the seat in place. If difficult, lubricate the rubber insert with water.

Alternative Pan Installation

1. Place the template over the anchor pins, selecting appropriate hole numbers to meet the 430mm dimension from the front of the pan to the centre line of the template.
2. Insert bolts and tighten using a screwdriver. Do not use a battery driver.
3. Remeasure the distance, ensure the 430mm dimension is met, and add the cover cap. Click seat in place.

Aftercare Instructions
Clean surfaces with a soft damp cloth and mild soap solution. Do not scrub or scour. Avoid abrasive cleaning agents and if using bleach, ensure it does not come into contact with the seat. Keep the seat in an upright position until all cleaner is flushed away. Do not stand on the lid or ring of your toilet seat.

FAQ

• Q: How do I remove the seat for cleaning?
  A: Remeasure the distance to ensure the 430mm dimension is met, then remove the template, add the cover cap, and click the seat in place.

• Q: Can I use bleach to clean the toilet seat?
  A: Yes, you can use bleach but ensure it does not come into contact with the seat and follow the aftercare instructions provided.

• Q: What should I do if it’s difficult to push the seat in place?
  A: Lubricate the rubber insert with water before trying to click the seat in place.

Soft Close Quick Release Secure Fix Toilet Seat

FITTING INSTRUCTIONS
Please read carefully before attempting to fit the seat & refer to the ‘does it fit’ diagram below to ensure it’s suitable for your toilet.
Please make sure the warnings and after-care instructions are made available for the end user to read.

Does it fit?

Top Fix Installation

Note – alternative nuts and washers are supplied if you wish to secure the seat from underneath the deck of the toilet pan. If so dispose of the black top fix inserts and tighten with the securing key supplied.

Instructions A – Fitting on Loft Pan

1. Push top fix inserts into toilet pan holes.If difficult to push in, lubricate the rubber insert with water.

2. If fitting on alternative pan, please proceed to instructions B
   Insert screw through hole 3 (marked on the plate) of the hinge anchor and into the top fix inserts, fixing semi-tight to the pan, to allow for adjustment.

3. Using the anchor template provided, place over the two pins, making sure the template is parallel to the back of the pan.

4. Once the template is in place and correctly positioned (430mm +/- 3 from the front of the pan to centre line of the template), hold the hinges securely and tighten the fixing screws with a screw driver. Remove the template.

5. Add the cover cap and click seat in place.

Instructions B – Fitting on Alternative Pan

1. Place the template over the anchor pins, selecting the appropriate hole numbers (on the anchors) so that the 430mm dimension from the front of the pan to the centre line of the template is met.
   Note: Selected anchor numbers must be matching

2. Once the 430mm dimension shown above is met and the template is parallel to the back edge, insert the bolts then tighten using a screw driver.

3. Remeasure the distance, making sure the 430mm dimension is met and remove the template and add the cover cap.

4. Click seat in place.

WARNINGS

• The fittings pack contains small items which should be kept away from young children.
• The toilet seat can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrect product installation or assembly.
• Do not stand on the lid or ring of your toilet seat.
• After a few days check that the fixings are still tight. This is necessary as the rubber components will compress during the first few days.
• Periodically check all fixings to ensure none have come loose and re-tighten where necessary. Please take care when handling or moving the toilet seat as careless handling may cause damage or injury.
• Never over rotate the seat open when it is removed from the WC as this can cause damage to the hinges.
• Do not force down the seat ring or lid as this may compromise the performance of the soft close hinges.

AFTERCARE INSTRUCTIONS

Removing seat for cleaning

• Clean surfaces with a soft damp cloth and mild soap solution
• Do not scrub or scour
• Do not use abrasive cleaning agents. If using bleach, abrasive or corrDo not use abrasive osive cleaning agents inside the toilet bowl, ensure that cleaning agents. these do not come into contact with the seat. Keep the seat in  the upright position until all cleaner has been flushed away.
• Do not stand on the lid or ring of your toilet seat

For Technical Help Call
01225 787870
Tavistock | Brassmill Lane Trading Estate | Bath | BA1 3JF
E: info@tavistock-bathrooms.co.uk
W: tavistock-bathrooms.co.uk
O803SC-SF v2 08.20

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>