HILTI M12x85 Stainless Steel Safety Stud Anchor Instruction Manual
- June 1, 2024
- HILTI
Table of Contents
HILTI M12x85 Stainless Steel Safety Stud Anchor
Specifications:
- Product Models: HST3, HST3-R, HST3 BW, HST3-R BW
- Sizes: M12x85 to M12x350
- Thread Fixing: 10 to 275
- Minimum and Maximum Thread Fixing Time: 10 to 275 seconds
- Minimum and Maximum Height: 60 to 135 mm
- Nominal Height Range: 100 to 220 mm
- Pressure: 6 bar / 90 psi
- Torque: Tinst = 60Nm
DIMENSION
Product Usage Instructions
Installation:
- Choose the appropriate model based on your requirements.
- Ensure the thread fixing time falls within the recommended range.
- Adjust the height within the specified limits.
- Apply a torque of Tinst = 60Nm for proper installation.
Maintenance:
Regularly check the thread fixing time, height, and pressure to ensure optimal performance. Replace any worn-out parts promptly.
FAQ
Q: What is the recommended torque for installation?
A: The recommended torque for installation is Tinst = 60Nm.
Q: What is the pressure rating of the product?
A: The product has a pressure rating of 6 bar / 90 psi.
Q: How do I choose the right model for my application?
A: Consider your thread fixing requirements, height range, and specific needs to select the most suitable model from the available options.
Read User Manual Online (PDF format)
Loading......