SKYZONEFPV TX2500 VTX 2.5W Output and 5.8G Antenna User Manual
- June 1, 2024
- SKYZONEFPV
Table of Contents
SKYZONEFPV TX2500 VTX 2.5W Output and 5.8G Antenna
Product Specifications
- Output Power: 2.5W
- Power Levels: 25mW, 800mW, 1600mW, 2500mW
- Voltage Input: 7-26V
- Frequency Bands: A, B, E, F, R, L, X
Product Usage Instructions
Setting Up the VTX:
- Choose between Button mode and IRC mode.
- If using Button mode, disable the IRC protocol in Betaflight.
- To manually set the VTX:
- Press the mode button to enter BAND setting mode.
- Short press the set button to change the BAND. Press the mode button to enter CH setting mode.
- Under CH setting mode, short press the set button to change the channel. Press the mode button to enter Power setting mode
- Under Power setting mode, short press the set button to adjust the power level.
Frequently Asked Questions
Q: Can I use both Button and IRC mode simultaneously?
A: No, you can only choose one mode at a time. If using Button mode, ensure IRC protocol is turned off in Betaflight.
Q: How do I know which frequency band and power level the VTX is set to?
A: In Button mode, the LED segment displays the BAND/CH and power in sequence. In IRC mode, it displays the frequency and power.
The ATOMRC TX2500 is powerful VTX which have 2.5W output, the CNC case and fan can prevent VTX from overheating, LED segment make the VTX easy to set and check the BAND/CH/POWER, its also support X Band(5G Hz) and Low Band.
Features
1, Support X Band(5G Hz) and Low Band
2,CNC case and fan to dispatch heat
3, 800/1600/2500mW adjustable power output
4, 7-26V Wide Range Voltage input
5, LED Segment Display, easy to check status of the VTX 6, Button/IRC control,
fast to change the CH and Power
Notice: You can only choose one of the Button mode and the IRC mode. If you use the button mode, you need to turn off the IRC protocol in BF. The LED segment displays the BAND/CH and power in sequence in the button mode, and the frequency and power at IRC mode.
Power Output at X Band
| 4990M | 5020M | 5050M | 5080M | 5110M | 5140M | 5170M | 5200M | |
|---|---|---|---|---|---|---|---|---|
| PowX er | 1W | 1.2W | 1.4W | 1.5W | 2W | 2.2W | 2.4w | 2.5W |
Power Level
Frequency Table
| Band | CH 1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 |
|---|---|---|---|---|---|---|---|---|
| A | 5865M | 5845M | 5825M | 5805M | 5785M | 5765M | 5745M | 5725M |
| B | 5733M | 5752M | 5771M | 5790M | 5809M | 5828M | 5847M | 5866M |
| E | 5705M | 5685M | 5665M | 5645M | 5885M | 5905M | 5925M | 5945M |
| F | 5740M | 5760M | 5780M | 5800M | 5820M | 5840M | 5860M | 5880M |
| R | 5658M | 5695M | 5732M | 5769M | 5806M | 5843M | 5880M | 5917M |
| L | 5362M | 5399M | 5436M | 5473M | 5510M | 5547M | 5584M | 5621M |
| X | 4990M | 5020M | 5050M | 5080M | 5110M | 5140M | 5170M | 5200M |
Wiring Diagram
How to manually set the VTX
Disable the IRC protocol on betaflight UART tab
- Step 1: Press the mode button into BAND setting mode.
- Step 2: Under BAND setting mode, short press the set button to change BAND, press the mode button into enter CH setting mode.
- Step 3: Under CH setting mode, short press the set button to change CH, press the mode button enter the Power setting mode.
- Step 4: Under Power setting mode, short press set button to adjust the power. Power Level Display