Aminalife Hall Tree Modern Shiplap Bench Instructions

Table of Contents

Aminalife-Hall-Tree-Modern-Shiplap-Bench-fig-1

Care and maintenance:

Use the anti-tip strap or wall fixing method provided (if applicable)
Do not allow children to climb or hang on the furniture
Do not open more than one drawer at a time
Do not place heavy items in the top drawers
Do not place heavy items on top of the furniture, unless the furniture has been designed for this purpose

Tools required:
Screwdriver

Using Camlocks

Step 1:
Connect the male camlock as directed in the assembly instructions using a screwdriver.
Step 2:
Push the male camlock into the entry hole.
Step 3:
Insert the female camlock as shown in the instruction. Ensure that the arrow on the top of the camlock points towards the entry hole for the male camlock.
Step 4:
Turn the female camlock clockwise with a screwdriver. You should feel a click when the camlock is locked in place. The joint is now secure.

Additional Steps:
Follow the remaining assembly instructions provided in the manual, using the specified parts and hardware.

What tools are required for assembly?
You will need a screwdriver.
How should I secure the furniture to prevent toppling?
Use the anti-tip strap or wall fixing method provided, if applicable.
Can children climb or hang on the furniture?
No, it is not recommended for children to climb or hang on the furniture.
Can I place heavy items in the top drawers?
No, it is not recommended to place heavy items in the top drawers.
Can I place heavy items on top of the furniture?
Only if the furniture has been specifically designed for this purpose.
Where can I contact for further questions?
You can contact us via email at [email protected].

Important – Please read these instructions fully before starting assembly

Check you have all the components and tools listed on the following pages.
Remove all fittings from the plastic bags and separate them into their groups.
Keep children and animals away from the work area, small parts could choke if swallowed.
Make sure you have enough space to layout the parts before starting.
During assembly do not stand or put weight on the product, this could cause damage.
Assemble the item as close to its final position (in the same room) as possible.
Assemble on a soft level surface to avoid damaging the unit or your floor.
Parts of the assembly will be easier with 2 people.
To reduce the likelihood of damaging your product please ensure that your power drill is set on a low torque setting.

Care and maintenance

Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.
From time to time check that there are no loose screws on this unit.
This product should not be discarded with household waste. Take to your local authority waste disposal centre.

Handy Hints

Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten the bolts
Regularly check and ensure That all bolts and fittings are tightend properly.
WARNING
In order to help prevent overturning please follow these instructions

To help prevent product toppling over please follow the below steps:-

Use the anti tip stap or wall fixing method provided (if applicable)
Do not allow children to climb or hang on the furniture
Do not open more than one drawer at a time
Do not place heavy items in the top drawers
Do not place heavy items on top of the furniture, unless the furniture has been designed for this purpose

Aminalife-Hall-Tree-Modern-Shiplap-Bench-fig-2

Step 1
Connect the male camlock as diected in the assembly instructions using a scewdriver.
Step 2
Push the male camlock into the entry hole.
Step 3
Insert the female camlock as shown in the instruction.
Note ensure that the arrow on the top of the camlock points towards the entry hole for the male camlock.
Step 4
- Turn the female camlock clockwise with a screwdriver.
- You should feel a click when the camlock is locked in place.
- The joint is now secure.