The Home Depot ZJD00039-4 Light Fixture Instruction Manual
- June 1, 2024
- THE HOME DEPOT
Table of Contents
The Home Depot ZJD00039-4 Light Fixture
Product Information
Specifications:
- Split profiles: ZJD00039-4: 4PCS, ZJD00039-6: 6PCS, ZJD00039-8: 4PCS
- Grub screw: 2PCS
- Hex key: 1PCS
- Hanging ring: 1PCS
- Round plate: 1PCS
- Mini screw: 1PCS
- Hanging tube: 1PCS
- Connected nut: 1PCS
- Light arms: ZJD00039-6: 6PCS, ZJD00039-8: 8PCS
- Hook: 1PCS
- Small chain: ZJD00039-4: 4PCS, ZJD00039-6: 6PCS, ZJD00039-8: 8PCS
- Big chain: 1PCS
- Canopy: 1PCS
- Cap nut: 2PCS
Product Usage Instructions
Step 1: Assemble Split Profiles
Assemble the split profiles to form a complete ring. Fasten the profiles
with screws provided.
Step 2: Prepare Light Arms
Rotate the light arms counterclockwise 8-10 times and install them onto the
connected nut. Use the hex key to lock the light arms in place.
Step 3: Install Hanging Tube
Let the main wire go through the tube and rotate to fix the tube on the nut
of the connected ball. Secure it in place using the grub screw and hex key.
Step 4: Hang the Ring Frame
Hang the ring frame to the round plate of the light fixture using the hook of
the small chain.
Step 5: Adjust and Install Light Fixture
Adjust the tube to make it straight and rotate the screw to fix it in
place. Hang the light fixture to the canopy using the big chain and let the
wire go through both the chain and canopy.
Step 6: Mount to Ceiling
Install the bracket to the ceiling junction box using screws. Connect the
wire to your home line and then install the fixture to the bracket using the
cap nut. Finally, install the bulb.
Frequently Asked Questions (FAQ)
- Q: Can I install this product myself?
A: No, only a professional electrician should install this kind of product. Make sure to power off electricity during installation.
WHAT’S INCLUDE
INSTALLATION INSTRUCTION
Please mind that profile female A should install to male A, profile B should install to male B, same as profile C,D,E,F,G…
- Assemble the split profiles 1 to a completly ring, fasten the profiles with screw 2.
- Rotate the light arms 7 counterclockwise 8-10 times, and installto the ball 3.
- Let the main wire go through the tube 4 , rotate to fix the tube 4 on the nut of ball 3 , lock it with grub screw 5 (use hex key 6 ).
- Hang the ring frame 1 to the round plate of light fixture with hook 10 of small chain 8.
- Hange the light fixture to the canopy 13 with big chain ( 12, let the wire go through chain 12 and canopy 13.
- Install the bracket to the ceiling junction box with screw 15.
- Connect the wire to your home line.
- Install the fixture to the bracket with cap nut 17.
- Install the bulb 18.
Please read carefully before installation!!!
Note: Please make sure that the electricity is powered off during
installation!
Only a professional electrician should install this kind of product!