NIVEL 03-168 Grab Handles Instruction Manual
- June 1, 2024
- NIVEL
Table of Contents
NIVEL 03-168 Grab Handles
INSTALLATION INSTRUCTIONS
03-168: One Piece Automotive Style Grab Handle
-
STEP 1
Insert the allen head bolt into the grab handle and thread the ‘T’ nut onto the end of the bolt.
-
STEP 2
Align the ‘T’ nuts with the inside wide track as shown.
-
STEP 3
Using a 6mm allen wrench, tighten the allen head bolt ensuring the ‘T’ nut engages on the triple track top.
-
STEP 4
Tighten the allen head hand tight to ensure the grab handle is secure to the top and use supplied plugs to cover bolt holes.
03-167: Round Grab Handle with Nylon Strap
-
STEP 1
Install the ‘T’ studs into the inside wide track and turn to engage with the track.
-
STEP 2
Place the grab handle mounting bracket onto the ‘T’ studs with the flat side facing out, as shown in Step 3. -
STEP 3
Thread the supplied locknut onto the ‘T’ studs as shown and adjust the grab handle to the desired width.
-
STEP 4 Using a 13mm socket, hand-tighten down the locknut securely, ensuring the ‘T’ stud is fully engaged with the track.
Note: Self-tapping screws are included for optional installation locations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>