KUNG UNT60 Motorcycle Diagnostic Tool Motorcycle Fault User Manual
- June 1, 2024
- KUNG
Table of Contents
KUNG UNT60 Motorcycle Diagnostic Tool Motorcycle Fault
Product Information
Specifications:
- Model: M3
- Functions: Diagnose, Voltage Detection, Settings, Help
- Features: Voltage detection, multi-language selection, unit switching
Product Usage Instructions
System Diagnosis:
The motorcycle diagnostic tool supports scanning, identification, and code reading of all systems of the current model. It reports the assembly status and fault codes for each system. You can browse assembly status, clear fault codes, display data stream with an oscillogram, and perform functions like engine, ABS, tire pressure, anti-theft system diagnosis.
Operation Guideline:
Brand Model Selection:
Press the [ ] key to select the diagnostic icon and press the [OK] key to choose the model brand.
Mode Selection:
Press [ ] to select the vehicle brand and press [OK] to enter the diagnosis mode selection. Choose between [Quick Test] and [Control Unit].
Quick Test:
[Quick Test] automatically scans the assembly status of all systems and reads fault codes. You can pause scanning by pressing and holding [F3]. [F1] – [Report]: Displays assembly status, fault codes, and descriptions.
FAQ
Q: Can this tool diagnose all mainstream motorcycle brands?
A: Yes, the tool is designed to diagnose problems for mainstream motorcycle brands.
Q: How do I switch between languages on the tool?
A: The tool supports multi-language selection. You can change the language in the settings menu.
PRODUCT OVERVIEW
This is a handheld motorcycle diagnostic tool for main-stream motorcycle brands and can help technicians diag-nose problems faster and make repairs. This tool has func-tions such as voltage detection, multi-language selection, and unit switching. It has a clear interface and is easy to operate. It is a good helper for motorcycle maintenance.
PRODUCT PICTURE
Functions:
- Diagnose
- Voltage
- Settings
- Help
Button Instructions
- Short press to select [F1]
- Long press to select [HELP]
- Short press to select [F2]
- Long press to select [F3]
- Left/Right/Up/Down
- Back
- [OK] Confirm
DIAGNOSE
System Diagnosis Features
- Supports scanning, identifi cation and code reading of all systems of the current model, and reports the assembly status of all systems and whether there are fault codes for each system.
- Support to browse the assembly status and fault code description of all systems of the vehicle model.
- Support one-click code clearing of all systems.
- Display data stream with oscillogram.
Functions
- Support engine / ABS / Tire pressure / Anti-theft and other systems
- Read system information
- Read fault code
- Clear fault code
- Read data stream
- Read freeze frame data
- Actuator test
- Service function (including idle speed regulation /throttle position learning, etc.)
OPERATION GUIDELINE
Brand Model Selection
Press the key to select the diagnostic icon,and press the [OK] key to select the model brand.
Mode Selection
Press to select the vehicle brand, and press [OK] to enter the diagnosis mode selection. There are two options: [Quick Test] and [Control Unit] (the screen is shown below).
Quick Test
[Quick Test] is to automatically scan the assembly status of all systems of the vehicle model and read the fault codes. During the system scanning process, you can press and hold [F3] to pause the scanning (the screen is shown below).
[F1] – [Report]
Display the assembly status of the system, explain whether there is a fault
code, and expand the fault code description (the screen is shown below).
[F2] – One-click code clearing
For systems that have been assembled and have fault codes, all codes shall be
cleared and the fault codes shall be read again.
Single System Diagnosis
Customers independently choose the functions to be performed (the screen is
shown below).
Module Information
[Module Information] will display system information, such as production date,
serial number and other information (the screen is shown below).
Read Fault Code
[Read Fault Code] (the screen is shown below).
(Note: manual selection of [Current / Pending] is not required for some
vehicles.)
Press the button to select one of them, press the [OK] key to view the fault
code information in the system, (the screen is shown below).
Press the key to switch the fault codes.
Clear Fault Code
[Clear Fault Code], the screen will show the relevant prompts for code
clearing (the screen is shown below).
Press [F1] to perform code clearing.
Real-time Data Stream
Press the key to select [Real-time Data Stream] to enter the data stream
selection interface. You can press [F1] to select all or press the [OK] key to
select the specifi ed data stream (the screen is shown below).
Read Freeze Frame Data
Press the key to select [Read Freeze Frame Data] to read the freeze frame
information (the screen is shown below).
Actuation Test
Press the key to select [Actuation Test] (the screen is shown below).
After selecting the desired function, operate according to the prompts.
Voltage Detection
Press the key in the main menu to select [Voltage Detection], and the OBD
battery voltage can be detected in real time (the screen is shown below).
Press [F1] to enter the waveform display (the screen is shown below).
Settings
Press the key to select the [Settings] icon, press the [OK] key, there are
three functions: voice switch, unit switch, and language selection (the screen
is shown below).
Voice Settings
Press the key to select [Voice], press the [OK] key to turn on or of f the
voice.
Unit Settings
Press the key to select [Unit], press [OK] to select metric / imperial units
switch.
Language Settings
Press the key to select [Language], press the [OK] key to select the language
of dif ferent countries.
Help
Press the key to select the [Help] icon, press the [OK] key to view the
current system version and software package version.
ABOUT SOFTWARE UPGRADES
Connect the device to the computer and wait for the device to be recognized by the computer. After the recognition is successful, a new drive symbol will appear on the computer. Open this and replace the “DIAGNOSE” folder in the drive with the downloaded “DIAGNOSE” upgrade folder, and then power on again. The updated f iles can be obtained by contacting the customer service or the of f icial website.
IMPORTANT NOTICE
The USB port of this device operates on a 5V power supply and is solely intended for connecting to a com-puter for product upgrades. It is crucial to avoid using fast chargers with a voltage higher than 5V to connect this device. Failure to adhere to this guideline may lead to device malfunction or damage.
WARRANTY
Thank you for choosing our products, we will provide you with the following services and commitments:
- The warranty period of this product is 3 years.
- After the warranty expires, replacing parts will incur a repair fee.
- Please contact the manufacturer after failure, we will give you the most perfect service in the shortest time.
The following items are not covered by the warranty:
- The wearing parts are not covered by the warranty.
- Products purchased through informal channels.
- Damage caused by use and maintenance not in accor-dance with the product manual.
www.mrcartool.net
aftersale@mrcartool.net
Please select text to grab.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>