SUNLAX Solar LED Umbrella Instructions
- June 1, 2024
- SUNLAX
Table of Contents
SUNLAX Solar LED Umbrella
Product Information
Specifications:
- Main support rods for umbrella frame
- Pre-installed LED lights on eight-frame ribs
- Push rod system for height adjustment
- Button for adjusting umbrella slope
- Solar-powered LED lights
Product Usage Instructions
Installation:
- Connect the two main support rods to form the umbrella frame.
- The LED lights are pre-installed on the eight-frame ribs, no additional operation is needed.
- Select a level and stable location for installation.
Use:
- Adjust the height of the umbrella using the push rod system.
- Use the button to adjust the slope of the umbrella for different sunlight angles.
- The solar LED lights automatically turn on/off based on lighting conditions.
- Lights come on automatically at night or in low light.
Cleaning:
Clean fabrics and frames regularly with water and a soft cloth. Avoid using chemical cleaners.
Check:
Regularly inspect the fabric and frame for damage or wear. Promptly repair or replace if an issue is found.
Storage:
When not in use, store the umbrella in a dry and ventilated place to prevent long-term exposure to sunlight or dampness.
FAQ (Frequently Asked Questions)
-
Q: Can I use chemical cleaners to clean the umbrella?
A: It is recommended to clean the fabrics and frames with water and a soft cloth, avoiding chemical cleaners to maintain the product’s quality. -
Q: How do I know if the LED lights are functioning correctly?
A: The solar LED lights automatically turn on at night or in low light conditions. If you suspect an issue, you can test them by covering the solar panel with your hand to simulate darkness and observe if the lights turn on.
Installation
According to the instructions, connect the two main support rods together to form the main frame of the umbrella. The LED lights are pre-installed on the eight frame ribs, requiring no additional operation. Select a suitable location to ensure that the ground is level and stable.
Use
Use the push rod system to adjust the height of the umbrella, use the button to adjust the slope of the umbrella to adapt to different sunlight angles. The solar LED lights automatically turn on or off according to the lighting conditions. The lights come on automatically at night or in low light.
Cleaning
Clean fabrics and frames regularly with water and a soft cloth, avoiding
chemical cleaners.
Check: Regularly check the fabric and frame for damage or wear, if there is a
problem, timely repair or replacement.
Storage
When not in use, please put the umbrella away and properly store in a dry and ventilated place to avoid long-term exposure to sunlight or damp environment.