bernette 502040.60.29 Hemmer Foot Instructions
- June 1, 2024
- bernette
Table of Contents
bernette 502040.60.29 Hemmer Foot
Hammer Foot
The hemmer foot quickly and easily sews even seams with a depth of 2.5 cm. A narrow or wide coverstitch can be used to neaten the cut edge.
Article number: 502040 60 29
Instruction
- Set machine for “Coverstich”.
- Raise the presser foot and snap on “Hemmer foot”.
- Insert fabric from the left side until the edge of fabric lays against the guide.
- Lower presser foot and sew, 1″ (25mm) of hem is produced.
- Note: when sewing in a circle, at seam end sew about 1″ (25mm) over the first stitches.
Specifications
Feature | Specification |
---|---|
Seam Depth | 2.5 cm |
Article Number | 502040 60 29 |
Description of Diagram
The diagram shows the hemmer foot attached to a sewing machine. The foot is positioned over the fabric, illustrating the point at which the fabric should be inserted. It highlights the mechanism by which the hemmer foot guides the fabric to create an even hem as the machine sews.
FAQ
What is the purpose of the hemmer foot?
The hemmer foot is used to sew even seams with a depth of 2.5 cm, helping to neaten the cut edge of the fabric.
How do you attach the hemmer foot to the sewing machine?
You can attach the hemmer foot by raising the presser foot of the sewing machine and snapping the hemmer foot on.
Can the hemmer foot be used for sewing in a circle?
Yes, when sewing in a circle, you should sew about 1 inch (25mm) over the first stitches at the seam end.
What should be done if the hem is not even?
Ensure that the fabric is inserted correctly from the left side until the edge of the fabric lays against the guide and that the presser foot is lowered properly.