JVC TH-E321B 2.0 Channel Soundbar Instruction Manual

JVC TH-E321B 2.0 Channel Soundbar Instruction Manual

TH-E321B

INTRODUCTION

• Thank you for buying our product.
• Please read through these operating instructions, so you will know how to operate your
  equipment properly. After you finished reading the instructions manual, put it away in a safe
  place for future reference.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC  SHOCK, DO NOT REMOVE COVER (OR BACK).  NO USER-SERVICEABLE PARTS INSIDE. REFER  SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude as to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Safety

• Read these instructions – All the safety and operating instructions should be read before
  this product is operated.

• Keep these instructions – The safety and operating instructions should be retained for
  future reference.

• Heed all warnings – All warnings on the appliance and in the operating instructions should
  be adhered to.

• Follow all instructions – All operating and usage instructions should be followed.

• Do not use this apparatus near water – The appliance should not be used near water or
  moisture – for example, in a wet basement or near a swimming pool and the like.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s
  instructions.

• Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus
  (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has
  two blades with one wider than the other. A grounding plug has two blades and a third
  grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience
  receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug the apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified personnel. Servicing is required when the apparatus has been
  damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled
  or objects have fallen into the apparatus, the unit has been exposed to rain or moisture,
  does not operate normally, or has been dropped.

• This equipment is a Class II or double insulated electrical appliance. It has been
  designed in such a way that it does not require a safety connection to electrical earth.

• The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids,
  such as vases, shall be placed on the apparatus.

• Minimum distance around the apparatus for sufficient ventilation is 5cm.

• The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers,table-cloths, curtains, etc…

• No naked flame sources, such as lighted candles, should be placed on the apparatus.

• Batteries should be recycled or disposed of as per state and local guidelines.

• The use of apparatus in moderate climates.

Caution

• Use of controls or adjustments or performance of procedures other than those described
  herein, may result in hazardous radiation exposure or other unsafe operation.

• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
  The apparatus must not be exposed to dripping or splashing and objects filled with liquids,
  such as vases, must not be placed on apparatus.

• The mains plug/appliance coupler is used as the disconnect device, the disconnect device
  must remain readily operable.

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or
  equivalent type.

Warning

• The battery (batteries or battery pack) shall not be exposed to excessive heat such as
  sunshine, fire or the like.

• Before operating this system, check the voltage of this system to see if it is identical to the
  voltage of your local power supply.

• Do not place this unit close to strong magnetic fields.

• Do not place this unit on the amplifier or receiver.

• If any solid object or liquid falls into the system, unplug the system and have it checked by
  qualified personnel before operating it any further.

• Do not attempt to clean the unit with chemical solvents as this may damage the finish. Use a clean, dry or slightly damp cloth.

• When removing the power plug from the wall outlet, always pull directly on the plug, never
  yank on the cord.

• Changes or modifications to this unit not expressly approved by the party responsible for
  compliance will void the user’s authority to operate the equipment.

• The rating label is pasted on the bottom or back of the equipment.

Battery usage CAUTION

• To prevent battery leakage which may result in bodily injury, property damage, or damage to
the apparatus:
– Install all batteries correctly, + and – as marked on the apparatus.
– Do not mix old and new batteries.
– Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (Ni-Cd, Ni- MH, etc.) batteries.
– Remove batteries when the unit is not used for a long time.

WHAT’S IN THE BOX

NOTE: Images, illustrations and drawings shown on this User Manual are for reference only, actual product may vary in appearance. Power cord quantity and plug type vary by regions.

IDENTIFYING THE PARTS

SOUNDBAR

REMOTE CONTROL

Prepare the Remote Control
The provided remote control allows the Soundbar to be operated from a distance.

• Even if the remote control is operated within the effective range 6m (19,7 feet), remote
  control operation may be impossible if there are any obstacles between the Soundbar and
  the remote control.

• If the remote control is operated near other products which generate infrared rays, or if other remote control devices using infrared rays are used near the Soundbar, it may operate
  incorrectly. Conversely, the other products may operate incorrectly.

Replace the Remote Control Battery

• Press and slide the back cover to open the battery compartment of the remote control.

• Insert two AAA size batteries (included). Make sure the + and – ends of the batteries
  match the + and – ends indicated in the battery compartment.

• Close the battery compartment cover.

Precautions Concerning Batteries

• Be sure to insert the batteries with correct positive + and – negative polarities.

• Use batteries of the same type. Never use different types of batteries together.

• Either rechargeable or non-rechargeable batteries can be used. Refer to the precautions on
  their labels.

• Be aware of your fingernails when removing the battery cover and the battery.

• Do not drop the remote control.

• Do not allow anything to impact the remote control.

• Do not spill water or any liquid on the remote control.

• Do not place the remote control on a wet object.

• Do not place the remote control under direct sunlight or near sources of excessive heat.

• Remove the battery from the remote control when not in use for a long period of time,
  as corrosion or battery leakage may occur and result in physical injury, and/or property
  damage, and/or fire.

• Do not use any batteries other than those specified.

• Do not mix new batteries with old ones.

• Never recharge a battery unless it is confirmed to be a rechargeable type.

PLACEMENT AND MOUNTING

Placement

Wall Mounting (if using Option B)

• Installation must be carried out by qualified personnel only. Incorrect assembly can result in
  severe personal injury and property damage (if you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the installer’s responsibility to verify that the wall will safely support the total load of the Soundbar and wall brackets.

• Additional tools (not included) are required for the installation.

• Do not over tighten screws.

• Keep this instruction manual for future reference.

• Use an electronic stud finder to check the wall type before drilling and mounting.

WARNING

• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance
  with the installation instructions.

• Suggested wall mounting height: ≤ 1,5 meters.

1. Drill 4 parallel holes (Ø 5,5-6 mm eachaccording to wall type) in the wall. The distance
   between the holes should be 864 mm.

2. Firmly fix 1 dowel into each hole in the wall if necessary. Tighten the wall mount brackets
   on the wall with screws and screwdriver (not included). Make sure that they are securely
   installed.

3. Loosen the screws at the back of the Soundbar. Leave approximately 2-3 mm between the
   screw head and the surface of the Soundbar.

4. Lift the Soundbar onto the wall mount brackets and slot into place.

GENERAL OPERATION

CONNECT POWER
Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the Soundbar.

Before connecting the AC power cord, ensure you have completed all other connections.

Soundbar
Connect the mains cable to the AC~ socket of the Soundbar and then into a mains socket.

Note: If there is no power, ensure the power cord and plug are fully inserted and the power is turned on.

STANDBY/ON
When you first connect the Soundbar to the mains socket, the Soundbar will be in Standby
mode.

• Press the button on the Soundbar or on the remote control to switch the Soundbar ON.
• Press the button again to switch the Soundbar back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch the Soundbar OFF
  completely.

Automatic Power Off Function
The Soundbar automatically turns to Standby mode after about 15 minutes if the TV or the
external unit is disconnected, switched off or the volume is too close to mute.

• To switch the Soundbar off completely, remove the mains plug from the mains socket.
• Please turn the Soundbar off completely to save energy when not in use.

SELECT MODES

ADJUST THE VOLUME

Note: While adjusting the volume, the status LED indicator will quickly flash. When the volume has hit maximum/minimum value level, the status LED indicator will slowly flash 3 times.

SELECT EQUALIZER (EQ) EFFECT

Press the EQ button on the remote control to select your desired preset equalizer effects.

HDMI CONNECTION
ARC (Audio Return Channel)
The ARC (Audio Return Channel) function allows you to send audio from your ARC-compliant
TV to your soundbar through a single HDMI connection. To enjoy the ARC function, please
ensure your TV is both HDMI-CEC and ARC compliant and set up accordingly. When correctly
set up, you can use your TV remote control to adjust the volume output (VOLUME +/- and
MUTE) of the soundbar.

Connect the HDMI cable (included) from unit‘s HDMI ARC socket to the HDMI (ARC) socket on your ARC compliant TV. Then press the remote control to select HDMI ARC.

NOTE:
Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to On. The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC function, please refer to the owner’s manual. ARC only works with devices that are HDMI ARC capable as well as with an HDMI 1.4 cable (and higher).

USE THE OPTICAL SOCKET

Remove the protective cap of the OPTICAL socket, then connect an OPTICAL cable (not included) to the TV’s OPTICAL OUT socket and the OPTICAL socket on the Soundbar.

USE THE COAXIAL SOCKET

You also can use the COAXIAL cable (not included) to connect the TV‘s COAXIAL OUT socket and COAXIAL socket on the Soundbar.

USE THE AUX SOCKET

Use a 3,5mm to 3,5mm audio cable (included) to connect the TV’s or external audio device headphone socket to the AUX socket on the Soundbar.

Use a RCA to 3,5mm audio cable (not included) to connect the TV’s audio output sockets to the AUX socket on the Soundbar.

AUX / OPTICAL / COAXIAL / HDMI ARC OPERATION

1. Ensure that the Soundbar is connected to the TV or audio device.
2. Press the (SOURCE) button repeatedly on the Soundbar or press the AUX, OPTICAL, COAXIAL, HDMI ARC buttons on the remote control to select the desired mode.
3. Press the +/- (VOLUME) button to adjust the volume to your desired level.

NOTE:
The Soundbar may not be able to decode all digital audio formats from the input source. In this case, the Soundbar will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio setting details) with HDMI / OPTICAL / COAXIAL input.

BLUETOOTH® OPERATION

Pairing the Soundbar with a Bluetooth® device to listen to music.

First time pairing

To disconnect the Bluetooth® function,you can:

• Switch to another source on the Soundbar;
• Disable the function from your Bluetooth® device.

NOTE:
The operational range between the Soundbar and the device is approximately 8 metres.
Before connecting a Bluetooth® device to the Soundbar, ensure you know the device’s capabilities. Compatibility with all Bluetooth® devices is not guaranteed.

Any obstacle between the device and the Soundbar can reduce operational range.
Keep this player away from other electronic devices that may cause interference.
The player will also be disconnected when your device is moved beyond the operational range.

USB OPERATION

By connecting a USB mass storage device (e.g. USB flash drive) to this unit, you can enjoy the
device’s stored music through the Soundbar.

NOTE:
The player supports the USB music file format of MP3 only.
The Soundbar can support USB devices with up to 32 GB of memory.
The Soundbar may not be compatible with all USB devices, this is not an indication of a problem with the unit.

LICENCE NOTIFICATION

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Zhong Shan City Richsound Electronic Industrial Ltd. is under
license. Other trademarks and trade names are those of their respective owners.

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the
United States and other countries.

TROUBLESHOOTING

To keep the warranty valid, never try to repair the system yourself. If you encounter problems
when using this unit, check the following points before requesting service.

SPECIFICATIONS

WE RESERVE THE RIGHT TO CHANGE TECHNICAL SPECIFICATIONS.

WARNING: DO NOT USE THIS PRODUCT NEAR WATER, IN WET AREAS TO AVOID FIRE OR INJURY OF ELECTRIC CURRENT. ALWAYS TURN OFF THE PRODUCT WHEN YOU DON’T USE IT OR BEFORE A REVISION. THERE
AREN’T ANY PARTS IN THIS APPLIANCE WHICH ARE REPARABLE BY CONSUMER. ALWAYS APPEAL TO A QUALIFIED AUTHORIZED SERVICE. THE PRODUCT IS UNDER A DANGEROUS TENTION.

TO AVOID DANGER OF SUFFOCATION, KEEP THE PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.

Disposal of old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Hereby, ETA a.s. declares that the radio equipment type TH-E321B is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.JVCAUDIO.cz/doc

This product is manufactured and distributed exclusively by ETA a.s., serviced and warranted by its designated partner. “JVC” is the trademark of JVCKENWOOD Corporation, used by such company under license.

Read More About This Manual & Download PDF:

References

• JVC AUDIO | jvcaudio.bg
• JVC AUDIO | jvcaudio.cz
• Declaration of Conformity | | jvcaudio.cz
• JVC AUDIO | jvc-tv.hu
• JVC AUDIO | jvcaudio.pl
• JVC AUDIO | jvcaudio.ro
• JVC AUDIO | jvcaudio.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>