MIR 132960 Spirobank II Smart BLE User Guide
- June 1, 2024
- MIR
Table of Contents
MIR 132960 Spirobank II Smart BLE
Product Information
Specifications
- Model: Spirobank II Smart BLE
- Manufacturer: MIR USA, Inc.
- Address: 5462 S Westridge Dr., New Berlin, WI 53151
- Contact: P +1 844-464-7872, F +1 262-364-2030, Email: pousa@spirometry.com.
- Website: usa.spirometry.com
Product Usage Instructions
Turning On/Off
- To turn on or off the Spirobank II Smart BLE, hold the power button.
Configuration Menu
- Upon startup, the device displays three screens. The second screen shows information such as patient files, tests, memory, and battery status.
- Pressing the right arrow brings up the configuration menu where you can navigate using the left and right arrow buttons. To go back, press the ESC button.
Entering Patient Information
- To enter patient information, press the left arrow under the I.D. symbol.
- Choose to create a new patient by pressing the left arrow or edit an existing file by pressing the right arrow.
- Follow the on-screen instructions to input data such as birthdate, height, weight, gender, and ethnicity.
Spirometry Testing
- Insert the Flowmir turbine with the mouthpiece facing the same side as the screen.
- Navigate to the spirometry test choices screen by pressing the minus sign under the spiro symbol.
- Perform the FVC test by following the on-screen instructions.
FAQ
- Q: How do I know if the Spirobank II Smart BLE is turned on?
- A: The MIR logo splash screen with date & time will appear upon turning on the device.
- Q: What should I do if a test times out?
- A: If a test times out, simply restart the process within about 15 seconds to proceed.
Spirobank II Smart BLE Quick Start
- The Spirobank II Smart BLE can be turned on or off by holding this button.
- There will be 3 screens that appear:
- The first is the MIR logo splash screen.
- This shows the date & time
- The second screen shows information:
- number of patient files,
- number of Spirometry tests,
- number of Oximetry tests,
- amount of free memory,
- and the battery symbol.
- The third screen is the Main Screen where you can choose a function
Entering patient information
- Press the left arrow under the I.D. symbol
This screen appears:
NOTE: we recommend writing down (in pencil) the ID# on the patients
chart. This will help you keep track whose test is whose – for when you upload
the data to the software and for retesting the same patient on the device
later on.
There are 2 choices for entering patient information
- Choose New by pressing the left arrow to create a new patient.
- Choose Modify by pressing the right arrow to edit an existing patient file.
- Entering new patient the insert patient data screen will appear.
- Use the minus and plus buttons to increase/decrease numbers in the number fields.
- Once birthdate, height in inches, and weight have been entered 2 choices will appear for gender press the minus to highlight male or press the plus sign to highlight female
- Then press the ok button to make your choice Right after that – the ethnicity options will appear use the left and right arrow to scroll up and down through the choices press the ok button to confirm your choice.
Now you will be back on the main ‘choose a function’ s
Spirometry Testing
-
Insert the Flowmir turbine with the cardboard mouthpiece pointing out the same side as the screen is on
-
Looking at the device main ‘choose a function’ screen Press the minus sign under the spiro symbol A new screen appears with spirometry test choices.
-
The POST choice will be grayed out until at least one Pre FVC test is done Press the right arrow for the FVC test.
-
The next screen will have instructions and you can perform the FVC test
-
The test will time out if not started in about 15 seconds
- Main ‘choose a function’ screen press the minus sign to choose oxy spot test
- The device will only do a spot oximetry test, but it will keep testing until you decide the test is done
The oxy test screen
- When done with the oxy test press the ESC button to end test and see results on the screen.
- Connect the device to the computer via the micro USB cable to charge it.
- The screen will say ‘external control’ and will remain on while connected
Spirobank II Smart BLE Quick Start
- To access the default configuration menu
- To access patient data from the main display
- To perform a new test of a patient recalled from the patient records
- To insert new patient data
- To modify patient data
- To display the most recent test of a patient
- To show the last test performed
- To access the database of the performed tests
- To search a test with the date of birth of a patient
- To search a test starting from a specific date onwards (partial database)
- To flick through a database from beginning to end and viceversa (complete database)
- Male patient selection
- Female patient selection
- To acces all spirometry test option / To perform an SpO2/BPM test
- To acces spirometry testing type
- To perform a forced vital capacity spirometry test FVC/search FVC tests in memory
- To perform a slow vital capacity spirometry test VC/search VC tests in memory
- To perform a maximum voluntary ventilation spirometry test MVV / search MVV tests in memory
- To perform a spirometry test with a broncodilator
- To check the alarms and alarm thresholds during oximetry testing
- To check the alarms and alarm thresholds during oximetry testing when at least one parameter is turned OFF
- Enabled alarm warning during oximetry testing To temporary disable the alarm
- Disabled alarm warning during oximetry testing To temporary enable the alarm
CONTACT
MIR USA, Inc.
- 5462 S Westrideg Dr., New Berlin, WI 53151
- P +1 844-464-7872 F +1 262-364-2030
- pousa@spirometry.com.
- www.usa.spirometry.com.
MIR ITALY, Head Office
- Via del Maggiolino, 125 – 00155 Roma
- P +39 06 22 754 777 F +39 06 22 754 785
- mir@spirometry.com.
- www.spirometry.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>