OceanLED OceanBridge Multi Zone Lighting Controller Installation Guide
- June 1, 2024
- OceanLED
Table of Contents
OceanLED OceanBridge Multi Zone Lighting Controller Installation Guide
OceanBridge
FIRMWARE UPDATE GUIDE
LIGHT. YEARS AHEAD.
STEP 1
Download the update file to a USB stick provided.* (Must be 4G or larger). Plug the USB into the port on the right hand side of your OceanBridge unit.
*USB stick provided is formatted to FAT32. Most USBs are formatted to FAT32 as standard. Required for update.
STEP 2
Navigate to: Menu > System > Firmware Update.
STEP 3
Select ‘FIRMWARE UPDATE’ button
STEP 4
If firmware is found a pop-up message will show. Select ‘UPDATE’ to initiate the firmware update process.
STEP 5
The screen will show an update message, and the updating process is expected to take approximately 6-7 minutes.
STEP 6
Once the firmware update is complete, the update message screen will close.
STEP 7
Navigate to: Menu > Info to confirm whether the correct firmware version has been installed.
Questions?
SPEAK TO A MEMBER OF THE TEAM!
UK Office
Tel: +44 1455 637505
Email: [email protected]
USA Office
Tel: +1 954-523-2250
Email: [email protected]
OceanLED Ltd / Tel: +44 1455 637505 / [email protected]