dftp 232036 Wall Lamp Instruction Manual
- June 1, 2024
- dftp
Table of Contents
dftp 232036 Wall Lamp
Product Specifications
- Brand: SPARGO
- Model: 232036
Product Usage Instructions
Installation
- Ensure the bulb (not included) is compatible with the fixture.
- Turn the fixture off before installation.
- Securely attach the fixture according to the provided manual.
Operation
Once installed, follow these steps to operate the SPARGO 232036:
- Ensure the bulb is securely in place.
- Turn the fixture on/off using the designated switch.
Maintenance
General maintenance
- Use a soft, dry cloth to dust the fixture.
- For stains, use a soft, damp cloth to gently remove them. Do not use cleaning agents or chemicals.
- Avoid turning on the lamp until all water has evaporated.
INSTALLATION INSTRUCTION
- IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.
- IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
- Class II: The lamp is double-insulated and does not need to be connected to the yellow-green earth wire.
- Z-connection: the wire cannot be replaced if damaged, and the lamn must be discarded.
- Do not exceed the maximum wattage.
- The mountain instruction must not be discarded..
- Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances that may cause damage to human health and the environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products from straining nature and the environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this Brodie
- General maintenance: Use a soft, dry cloth for dusting, and a soft, damp cloth to gently remove grease or similar stains. Never use any de- tergents or chemical reagents. Do not switch on the lamp before all the water has evaporated. Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is to be seen as a natural consequence of the manual process and is w- hat gives mouth-blown glass its character and organic look. Always clean- n mouth-blown glass when the glass is cold.
www.dftpglobal.com
Nordlux A/S – Ostre Havnegade 34 – DK-9000 Aalborg
Frequently Asked Questions
- Q: How do I choose the right bulb for the SPARGO 232036?
- A: Refer to the product manual for recommended bulb types and wattage. Make sure the bulb is compatible with the fixture.
- Q: Can I use cleaning agents on the fixture?
- A: No, avoid using cleaning agents or chemical reagents. Use a soft, damp cloth for cleaning.
- Q: What should I do if the lamp gets wet?
- A: Allow all water to evaporate before turning on the lamp to prevent damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>