Thumbs Up SWISOUFRABK Sound Frame Bluetooth Speaker Instructions
- June 1, 2024
- Thumbs Up
Table of Contents
Thumbs Up SWISOUFRABK Sound Frame Bluetooth Speaker Instructions
How to Hang
Hanging the Sound Frame is the same as hanging a picture frame to your wall. Securely insert a nail or screw into your wall and use the pre-installed nail grip on the Sound frame to hang and position it as you like.
Controls:
How To Use
POWER ON
long press the power switch for 2 seconds and wait for the tone to sound.
BLUETOOTH CONNECTION
Once the tone has sounded, the blue indicator will start to flash. This means
that the SoundFrame is now in Bluetooth Pairing mode. Go to the Bluetooth
Settings of your smart device and select ‘SoundFrame’.
PLAYING MUSIC/ AUDIO
Play music or audio directly from your smart device apps.
CONTROLS
Press once to Pause / Press once again to resume / Press for 3 seconds to
switch off.
long Press to play 1he previous song I Press once to reduce the volume.
long Press to play 1he next song I Press once to increase the volume.
FM RADIO
Double-click to enter FM Radio mode. Short press to search for and store radio
stations. Short press again to play the next radio stallion and short press to
play the previous rad to solation. Double press to return to Bluetooth mode.
Product Specification:
Dimensions (40 x 40 x 4.0 cm), Weight: 1.99kg / 4.4Ibs, Material: ABS Polyester & MDF, Play Time: 4-5 Hours (at 70% Max Volume), Charging Time: 3-4 Hours, Speaker Output: SW (Max), FM Radio Mode, Battery: 1,200mAh, Input: 5V 500mAh.
The symbol shown here and, on the product, means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life. The Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) has been put in place to encourage the recycling of products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increase of landfill. When you have no further use for this product, please dispose of it using your local authority’s re cycling processes. For more information, please contact your local authority or the retailer where the product was purchased.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE This equipment has been tested and found to comply with the limits for a
Class B digital device , pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur In a
particular installation. If this equipment does cause harmful interference to
radio or television reception , which can be determined by turning the
equipment off and on, the user in encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuit different from that of
which the receiver is connected
– Consult the seller or an experienced radio / TV technician for help
The device has been evaluated to meet general RF exposure requirement.
This device complies with Part 15 of the FCC Rules.
