Thumbs Up 8063 2 Player Retro Arcade Machine Instructions

RETRO 2 PLAYER
ARCADE MACHINE Instructions

2 Player Retro Arcade Machine – Instructions

Installing Batteries

Requires 4 x AA batteries for Arcade Machine (not included)
Requires 4 x AAA batteries for Arcade Controllers (2 x AAA per controller. Not included)
To insert the batteries into your Arcade Machine, unscrew the battery compartment as shown (fig.2) and install ensuring correct polarities.

Connecting to your TV

It is possible to connect your Arcade Machine to a television for an enhanced experience.

1. Insert AV Cable (included) into the rear of your television ensuring the colour of each cable matches that seen on your television.
2. Insert the other end of the AV Cable into the rear of the Arcade Machine (D).
   If your television does not include an AV input, it is possible to purchase an RF modulator (available separately).

Turning on your Arcade Machine

1. Turn your Arcade Machine ON by moving the Power Switch up (M).
2. Refer to your televisions instruction manual if you are attempting to connect via an AV Cable.
3. Once on, select whether you would like to play a ONE or TWO player game by using the Joystick (J) on Controller 1 (A).
4. Press Start (1) to contirm.
5. Select the game you wish to play by using the Joystick (J) on Controller 1 (A).
6. Press Start (1) to confirm.
7. Press Reset (G) at anytime to return to the game selection screen or turn your console OFF/ON (M).
8. To turn your Arcade Machine OFF. Move the Power Switch (M) down to the OFF position.

Troubleshooting

Q. Ne picture is appearing on the Arcade Machine

A. Ensure you have successfully turned on the Arcade Machine A. Are the batteries correctly installed according to the polarity shown A. Replace exhausted batteries

Q. The picture appears dark on my Arcade Machine or the picture begins to blink

A. Try replacing the batteries as these may have been exhausted

Q. No Sound

A. Ensure the Volume button has been pressed on the side of the unit

Battery warnings

• Do not use rechargeable batteries
• Do not attempt to recharge non-rechargeable batteries
• Insert batteries as marked and always follow the product and battery manufacturer’s instructions
• Use only the same or equivalent type of battery as recommended.
• Do not short circuit the supply terminals
• Do not mix old and new batteries
• Do not mix different types of batteries, such as alkaline, standard (carbon zinc),rechargeable (nickel cadmium) batteries.
• Always remove exhausted or dead batteries from the product
• Risk of explosion when battery replaced by incorrect types, dispose of used batteries according to the instructions

ARWORK INFORMATION PANEL
PRODUCT NAME: OR-2PLAYARCL LARGE MANUAL
ARTWORK TYPE:
◻ PRODUCT
◻ PACKAGING
◼ MANUAL
◻ STICKER

MATERIAL: 90gsm
FINISH: uncoated
CUTTER GUIDE SIZE: W 80 X H 95mm (when folded)
PRODUCT CODE: OR-2PLAYARCL
BARCODE:
TYPE: EAN 13, 80%

CMYK| SPECIFIC PANTONE COLOURS| FOLDING GUIDE| CUTTER GUIDE
---|---|---|---
| | Spot Colour ‘Folding’| Spot Colour ‘Cutter guide’

FONT LISTING:

| WHERE| WHAT
---|---|---
1| Product Title|
2| General Text|
3| TU Details|
4| Warnings|

NOTES:
Black and white print.
Double sided print
Folded manual.
Open size: W 480 x H 95mm

VERSION DATE:

WHEN SENDING FINAL ARTWORK TO FACTORY PLEASE MAKE SURE ALL FONTS HAVE BEEN OUTLINED, AND ALL IMAGED EMBEDDED.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

**** THIS SYMBOL MEANS THAT USED ELECTRICAL AND ELECTRONIC PRODUCTS SHOULD NOT BE DISPOSED OF WITH GENERAL HOUSEHOLD WASTE. THERE ARE SEPERATE COLLECTION SYSTEMS FOR USED ELECTRICAL AND ELECTRONIC PRODUCTS IN ACCORDANCE WITH LEGISLATION UNDER THE WEEE DIRECTIVE AND IS EFFECTIVE ONLY WITHIN THE EUROPEAN UNION. PLEASE CHECK WITH YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.

OR-2PLAYARCL
FCC ID: 2ARNX-8063 WARNING – CHOKING HAZARD Small parts not for children under 3 years.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>