Dongguan MEMO Technology Co Ltd 2BF2X-S2 Mobile Game Stretchable Handle Instruction Manual

Dongguan MEMO Technology Co Ltd 2BF2X-S2 Mobile Game Stretchable Handle

Specifications

• Product name: Mobile game stretchable handle
• Product model: S2
• Charging power: 15W
• Power supply interface: Type-C
• Product weight: 160g
• Product size: 1888842mm
• Compatible with: Android, iPhone 15 and above
• Packaging contents: host, instruction manual
• Maximum supported stretched size : 173mm

Thank you for purchasing this product.
Please read the instruction manual carefully and keep it properly before using

Hardware description

Product Parameters

• Product name: Mobile game stretchable handle
• Product model: S2
• Charging power: 15W
• Power supply interface: Type-C
• Product weight: 160g
• Product size: 1888842mm
• Compatible: Android, iPhone 15 and above
• Packaging contents: host, instruction manual
• Maximum supported stretched size : 173mm

Connect and power on

Please follow the steps below to connect your phone to the controller.
The controller will automatically

Mode switch

• To switch to wired mode, press and hold the FN+TURBO keys for 2 seconds
• To switch to Bluetooth mode, press and hold the FN+ menu for 2 seconds.

HID mode (Android only)

• The yellow light flashes slowly, and it’s always on when the connection is successful.
• This mode is most compatible with native Android gamepads and is recommended for native games.

XBOX mode (Xinput) (Android only)

• The white light flashes slowly, and it’s always on when the connection is successful.
• This mode is suitable for playing streaming and console-ported games. The controller vibration works normally in this mode.

M Virtual touch (Android only)

• The blue light flashes slowly, and it’s always on when the connection is successful.
• This mode is mainly used for mobile games that do not support native controllers and the initial key mapping needs to be used with an APP.
• You can scan the QR code on the packaging box for the download address. After the key mapping is completed, you don’t need to open the APP to use it when you enter the game for the second time.
  (For specific operations, please view the video tutorial)

iPhone mode

• The green light flashes slowly, and it’s always on when the connection is successful.
• This mode supports the Apple 15 series and above to play games that natively support controllers.

Bluetooth XBOX mode (Xinput) (Bluetooth name: MEMO-S2-XBOX)

• The purple light flashes slowly, and it’s always on when the connection is successful.
• This mode is suitable for playing streaming and console-ported games.
• The controller vibration works normally in this mode.
• (This is a backup mode and is not recommended when the wired mode can be used normally.)

Bluetooth M Virtual touch (Bluetooth name: MEMO-S2-Z)

• The red light flashes slowly, and it’s always on when the connection is successful.
• This mode is mainly used for mobile games that do not support native controllers and the initial key mapping needs to be used with an APP.
• You can scan the QR code on the packaging box for the download address. After the key mapping is completed, you don’t need to open the APP to use it when you enter the game for the second time.(For specific operations, please view the video tutorial. This is a backup mode and is not recommended when the wired mode can be used normally. )

Controller parameter adjustment

• Parameter adjustment is only available in the following modes: wired HID wired XBOX, and wired iPhone.
• After the controller enters the above three modes, click to add a device through the “MooWii APP” to scan.
• The device name is “MOME-S2-Set” and click it inside to adjust parameters. Parameters can be adjusted in Bluetooth XBox mode.

Sleep time

• The controller will automatically enter sleep mode after ten minutes of no operation. After sleep, all global buttons can make it work.
• Press and hold the Turbo key for 6 seconds to enter the sleep mode.

TURBO function

Burst settings:
Long press TURBO + the button you want to map, and click once to indicate the successful setting. The red light will light up when TURBO is pressed. After the setting is successful, the red light will flash 3 times and then go out, which means the setting is successful. The indicator light will flash when the keys are pressed continuously.

Fully automatic burst:
Double-click the TURBO key press the key mapped to the connected point once to enter the fully automatic mode, and click it again to stop working. After entering this mode, the red light keeps flashing quickly and will not enter sleep state.

Burst adjustment:
Press and hold the TURBO key + the left and right cross keys to adjust the speed of bursts, in order of 10-20-30-40 times. The light will flash at different frequencies according to the current burst frequency.

Burst cancellation:

• Press and hold the button that has been set with the burst function, and then click the TURBO button to clear it. The red light stays on for 1 second and then goes out, indicating successful cancellation.
• The buttons supported by burst are A/B/X/Y/LB/RB/LT/RT/L3/R3.

Back key mapping

Back key mapping:
Long press the FN key + M1/M2 to enter the recording mode, and press the button you want to map and click M1/M2 again to complete the recording.

Back key recording:
Long press the FN key + M1/M2 to enter the recording mode, press the key sequence to be recorded in sequence and click M1/M2 again to complete the recording.

Back key cancelling:
Long press the FN key + M1/M2 to enter the recording mode,
do not operate and then click M1/M2 again to cancel the button.

Lighting tips:
After entering the recording mode, the pink light is always on. When the recording is completed, the pink light flashes 3 times quickly to indicate that the recording is completed.

Note 1: Back key mapping and back key recording are based on the last operation. If the back key M1 has been mapped to the RT button, recording the M1 button at this time will directly overwrite the RT key value mapped by M1, and the newly recorded macro will be the main one. Note 2: Burst and recording are only effective in HID, XBOX, and Apple modes.

Screenshot
Double-click the FN key to take effect in HID mode.

Quick trigger

Turn on it:
Press and hold FN + the linear trigger LT or RT that needs to be turned on, the pink light will stay on for 1 second and then go out, which means the turn-on is successful.

Turn off it:
Press and hold FN + the linear trigger LT or RT that needs to be closed, the pink light flashes twice quickly and then goes out, which means the shutdown is successful.

System volume adjustment
TURBO + cross key up and down, to increase and decrease system volume

ABXY layout switching

Press and hold FN + press down on the right joystick to switch the layout. The controller will vibrate once to prompt and operate again to switch back to the XBOX layout. The controller vibrates twice.

Rocker, trigger calibration

The controller needs to be linked before calibration. Press and hold the window + menu button for 2 seconds at the same time. after the indicator light flashes slowly, turn the left and right joysticks 3 circles clockwise to the maximum diameter, and press LT/RT 3 times. Press the window + menu button again, the indicator light flashes twice quickly to return to the normal mode light.

Controller vibration

• Native vibration
  Support games with native vibration signals.

• Associated vibration
  You can perform key-related vibrations in the APP, and two vibration modes can be set.

• Vibration intensity
  Fn+Move the right stick up and down to adjust the vibration from 0 to 6, and it can also be adjusted and turned off in the app.

FCC

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

FAQ

• How do I connect my phone to the controller?
  • To connect your phone, follow the steps outlined in the “Connect and Power On” section of the user manual.
• How can I cancel burst settings?
  • To cancel burst settings, press and hold the button set with the burst function and then click the TURBO button. The red light will indicate successful cancellation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>