NOVA H1 Audio Earrings Instructions

NOVA H1 Audio Earrings

Weight and dimensions

• Earring 7.7g
• Charger 57g, 61mm x 61mm x 24mm
• Gift box 179g, 120mm x 121mm x 61mm
• Total weight 251g

Power

• Earring battery
  • 3.7V / 24mAh Li-Ion battery
• Charger battery
  • 3.7V / 320mAh Li-Ion battery
• Earring current supply max.
  • 33mA
• Charging case current max.
  • 450mA / 5V
• Charging connector
  • USB-C (no data lines)
• Wireless charging
  • WPC 1.2
• Charging time
  • 90 minutes
• Playtime (music)
  • 4h*
• Speaking time
  • 2.8h*
• Standby time
  • 48h*
• Number of full recharges from the charging case
  • Up to 3 times, for an additional 12 hours of playtime (16h total)

Connectivity

• Bluetooth version
  • 5.2
• Bluetooth profiles
  • A2DP, HFP, HSP, AVRCP
• Audio Codecs
  • SBC, AptX, AAC
• Operating range
  • 10m
• Frequency band
  • 2400 – 2483 MHz

Enviromental conditions

• Storage temperature -20°C – 60°C
• Operating temperature 0°C – 45°C
• Charging temperature 15°C – 45°C
• Waterproof no

Materials

• Gold / Silver plating
  • nickel-free
• Based on internal testing. Audio playback time tested by pairing a set of pre-production NOVA H1 Audio Earrings to a recently released Android smartphone. Actual battery life and charging time may vary by usage conditions, number of times charged and many other factors
• Play time may vary based on settings.

Product Description

Intended use

• The product is designed for listening to music and making phone calls.
• The earrings connect to a smartphone via Bluetooth.
• The earrings can be charged by putting them in the charging case and closing the charging case.
• The charging case can be charged through the USB-C connector or by placing the charging case on a wireless charging pad. The LEDs of the charging case will indicate that the charging process is ongoing.

Operating frequencies
2400 – 2483 MHz

RF output power

• Max. EIRP average 6.0dBm (4mW)
• max RF peak output power: 8.5dBm
• Rated antenna gain: -1dBi

Supply voltages and currents:

• Charging case Input: 5V / 450mA
• Charging case Output: 5V / 80mA
• Earring Input: 5V / 33mA
• Additional intended environmental conditions:
• Humidity: 10% – 90%, non-condensing

Soft- and hardware versions of the product

• Software Version: V1
• Hardware Version: V1

Compliance information

USA

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance voids the user’s authority to operate this equipment.

Changes or modifications not expressly approved by the party responsible for compliance void the user’s authority to operate this equipment.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules as this equipment has very low levels of RF energy.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>