PETSTAR YP2022015 Pet Smart Feeder User Manual

YP2022015 Pet Smart Feeder
User Manual

Pet Smart Feeder
Before using the product, please read the 1nstrucbons
carefully and keep hem properly.

Precaution for Use

Read this product manual carefully before use. Once installed or used, it means that you have carefully read and accepted the following safety instructions. Our company is not responsible for any accidental losses and wil not assume any legal responsibility caused by violation operations.

WARNING

• Do not plug or unplug the power adapter wilh wet hands.
• If this product is abnormal, please stop using this product immediately and pull out the power adapter.
• Please use it indoors and away from fire sources.
• Pets biting the wires may cause electric leakage, please use them correctly.
• There is a risk of explosion if the battery is unproperly instaled, please use the recommended type of battery.
• When disposing of batteries, please dispose and recycle according to the local garbage classification policy.

CAUTION

• Do not place this product on a high place to prevent the product from falling and cause product damage or pet safety issues. At the same time, to prevent pets from faling over the product, it is recommended to place it in a corner or against a wall.

• Keep it placed horizontally and do not overturn the device, otherwise the device will not work properly.

• This product is only suitable for pet dry food, do not put wet food in, and do not put items other than pet dry food into the bucket, otherwise it may cause equipment abnormality or the risk of pets eating by mistake.

• This product supports pet dry food (including freezeframed) with a diameter of less than 1 Smm.

• The height of dry food should not exceed the maximum line.

• The shape and size of pet food parties will cause a certain deviation in the number of grams of food delivered each time.

• The food container fid, Sul barrel. Food food container, and feeding tray can be washed, but the body cannot be washed.

• If you want to stop using it, disconnect lhe power supply, pour out the food, wash it and dry it before storing.

• If children use this device, please make sure to use it under the guidance of an adult.

• Except for maintenance personnel, other people are not allowed to
  maintain this product, so as to avoid various accidental injuries.

• If the machine will not be used for a long time, please remove all
  batteries to prevent potential risks caused by electrolyte leakage.

• Do not mix old and new batteries or use different types of batteries at the same time.

• Do not disassemble or short-circuit the battery.

• Do not recharge the battery or use the battery wilh lhe casing removed.

• Do not heat the battery or place it near fire.

• When the doors and windows of the car are dosed, please do not leave the battery in the car for a long time.

• Improper use of batteries can cause electrolyte leakage and cause a fire.

Parts Information

Installation Instructions

1. lnstall the bucket
   Align the triangular mark on the side of lhe food container with the unlock mark on the fuselage, align the container and put tt into the fuselage and rotate the container dock wise to the lock mark, then the installation is complete.

2. lnstall the desiccant
   Lift the lid, open the desiccant box to fil in the desiccant, and then reinstall the lid. “The desiccant is recommended to be replaced once a month, do not use if it is damaged. ·Desiccant recommended specifications: length <100mm; width <80mm; heighted <10mm.

3. lnstall bowl tray
   Insert the fuselage from top to bottom into lhe positioning groove of the bowl tray.

4. Switch on the power supply
   Take out the power cord, connect it to the power interface at the bottom of the fuselage and tum on the power.

5. Fix feeder body
   Press the feeder so that the suction cup at the bottom of the feeder tightly absorbs the ground to ensure that the ground is flat and clean. ( Avoid using on carpets or wet floors )

Instructions for Use

•  Starting Up
  After the power is tumed on, the machine enters the standby state. Press and hold the button for 3 seconds. At this time, the buzzer will sound, the white fight will flash twice quickly, and the machine will start up and perform self- test. If it is the first use or the first use after restoring the factory settings, the machine will directly enter the normal working state after the power-on self-inspection is completed.

• Shutdown
  Press and hold the button for 3 seconds, the buzzer will sound and the ring light will go out.

• Manual Button
  Short press the button once to tum on or off the ring fight.
  Press the button twice to deliver 1 portion of food (about 6-8g, depending on the shape and size of dry food, the number of grams per serving may vary).

• APP control
  1. Search the “Smart Life” APP in major mobile application markets or scan the QR code to download and instal it, After the installation is complete, register an account and log in to the APP;
  2. Click “Add Device” on the home page, tum on the Bluetooth and WiFi of the mobile phone, and ensure that the feeder is in the network distribution state, and bind the device according to the APP prompt, https://a.smart321.com/tuyasmartlifeiot
  3. Set the food delivery plan in the APP, and deliver food regular and quantitatively; “Ove to the upgrade and update of the APP, the actual operation may be slightly different from the above description, please operate according to  the guidelines in the current APP,

• Restore factory settings in
  Press and hold the button for 10 seconds, the white light wil flash continuously, and the distribution network information and feeding plan will be cleared.

• Battery Powered
  When the feeder is powered by battery, the WiFi does not work and cannot connect to the APP, The food can be delivered manually by double-clicking the button, or according to the latest feeding plan previously set.

“Install Backup Batteries
Use a screwdriver to open the battery cover at the bottom of the host, put 4 AA battens into the battery compartment, put the battery cover back and gotten the screws.
“Reminder:

1. Spare dry battens need to be purchased by yourself, only alkaline dry battens are supported {REPARECRES/LRS).
2. Make sure the installed battery is fully charged.
3. If the machine will Nol be used for a long time. please remove ail batteries to prevent potential danger caused by battery quid bulkage.

Washing Instructions

As the Picture Shows:

1. Take down the bucket and pull open the head cover, rotate and remove the distributional bucket and grain stirring piece at the bottom of the bucket.
2. Clean and wash the bucket, grain stirring piece and distributional bucket.
3. After washing and drying, put back and install all parts in turn.

Indicator Status Description I Troubleshooting

to the amount of left treats in the bucketry.
The red light flashes quickly for 5 seconds (interval 1 heurl.| (when the battery is powered) The pc/ war is less than 15%.
Power On Self Test| The Mute light flashes twice quickly, and the buzzer sounds.
Shutdown| The ring light goes out and the buzzer sounds.
Fault Description| Treatment measures
---|---
The ring light is always red.| Check the bucket rs installed correctly.
The ning light flashing red quaked.| Please replace the battery.
The ring fight flashing red slowly.| 1.Check whether the machine is short of treats, if there is a shortage✓ of treats, please replenish rt in time
2.It there is enough treats in the machine, please take out the bucket to check whether the treats is stuck. Alter cleaning the blockage, install the material bucket and power on again.
The ming light flashing white scaly.| Power on or off or press and hold the button again for 10 seconds to enter pairing mode.
The feeder cannot
connect to the Internet| 1. Check whether the machine is powered normally;
2. Check whether the machine bucket is installed normally
3. Check if the machine is short of treats/stuck;
4. Check whether the WiFi password is correct.
5. Check whether the WiFi frequency is 2.4GHz. if the WiFi frequency is 5GHz, please try after changing the router.

‘Reminder: If the above measures fail to solve the problem, please contact customer service.

Packing List

Caution

Part 15 B.
This equipment has been tested and bind to carplay with the limits for a Class B digital device, pursuant to Part 15 of the FCC RTlS These limits are designed to provide reasonable protection against harmful interference in a residential installation This enquirers generates uses and can radiate radio frequency energy and, if not installed and used in accordance wit the instructions may cause harmful interference b radio communications. However, there is no guarantee that interference will not occur in a particular installation If the equipment does cause harmful interference b radio or declension reception. which can be determined by turning the equipment off and on the user ts encouraged to try to correct he interference by ore or more of the following measures
–Reorient or relocate he receiving anterma
-Increase the separation between the equipment and receiver
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
-Consult the dealer or an experienced radio/TV technician for help_ CAUTION Any changes or modifications not expressly approval by the grantee of this device could void the user’s authority to operate the equip Meri
Part 15C & 15E
This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions. (1) this device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation RF exposure warning ( Distance from human body more than 20an no SAR requirements RF exposure warning This equipment must be nstalled and operated in accordance with provided instructions and the antennas used for this Varnette must be installed to provide a separation distance of at least 20 an from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna Installaion instructions and Tranerrvtter operating conditions for satisfying RF exposure compliance

Warning Statement:

“This device complies with Industry Canada license-exempt RSS standardish).
Operation 6 subject to the fallowing two condones: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.”

Basic Product Parameter Information
Product Name: Pet Smart Feeder
Product Size: 346.5X191X352(H) mm
Rated Capacity: 3L
Weight: About 1.8kg
Input: OC 5V 1A

HANGZHOU TIANYUAN PET PRODUCTS FACTORY
Add: No 10-1, Xing Ling Road, XingQiaoTown,
Limping District, Hangzhou, Zhejiang, China
PC.311106
Tel: 0086-57 1-28931673
Fax:0086-571-28887567
E-mail: ychxue<tigtaapet.com
Website: www.petproducts.com.cn

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>