RETEKESS TR609 TR609 Wall Mounted CD Player User Manual
- June 6, 2024
- RETEKESS
Table of Contents
Model: TR609
Wall Mounted CD Player User Manual
4-Steps Quick Instructions
- Remove the paper CD and put the correct CD discs.
- Insert the USB power cable into the power outlet AC will read CD automatically. before remote it. 110-240V
- Pull the pulling cable switch to power on, it will read CD automatically.
- Remove the insulating film on the battery drawer before remote it.
Warning / Reminder:
- The power supply input adaptor to the CD player must be 5V 1.5-2.0A.
- Put a CD to avoid dust in the condition of long time non-use.
- Do not use cracked or damaged CD.
- Do not touch the laser by hand.
- The CD player can not be powered-on by the remote.You have to pull the pulling-cord-switch before using the remote.
Packing List
Structure and buttons
Remote
CD Mode
Two ways to shift into CD mode:
- Put a correct CD and pull the power switch, it will read and play CD automatically after power on.
- CD player will shift into FM radio mode automatically after power on if the CD is not readable
- It supports forward/ backward & A-B repeat. You can select tracks by the digital buttons on remote
- When CD player is power on At plays the same track which was playing when last time power off
BT Mode
Two methods to shift into BT Mode:
- BT list name ” TR609 “
- When the CD player pairs with any BT-enabled devices. It works the same theory as other BT speakers. It receives BT from other devices but does not transmit BT to any other BT earphone/speaker
- The remote is able to control volume and NEXT/ PREV in BT working status
FM Radio
Two methods to shift into BT Mode:
Full auto search / semi-auto search
- Full auto search: Under FM working mode, short press the FM key to start the full-auto search, wait for a short time to complete the auto search, and the searched channels will be saved into the number buttons. then you can press number keys on the remote to play the related channels.,
- Semi-auto search: Under FM working mode, Long press NEXT/PREV key and release finger until the player becomes mute and it will automatically shift into the next/prev FM channel, Each time it searches only one channel and you can save this current track onto any number by long-pressing the related number. key. on remote
AUX Mode
Two methods to shift into AUX:
USB/SD Mode, A-B repeat
First, insert a USB drive into the USB port.
- Insert USB drive while power-on, CD player shifts into USB reading automatically
- Under USB mode, you can operate by remote control.
- Under USB mode. you can operate A-B repeat
Two methods to shift into USB Mode:
Audio Output
LED display & LED Light
Setting:
- time set range: 30 – 180 minutes.
- the sleep timer is activated by pressing the clock key once and it sets starting with 30 mins
- it adds 30 mins with each press which shows on the display when you are setting, the sleep timer can be set a maximum of 360 mins. then press one more time to turn off the sleep timer.
- set a time and the player starts to count down until it becomes standby automatically in the end
Specifications & Troubleshooting
Specifications:
- CD format support: CD,CD-R,CD-RW,MP3,WMA
- FM Radio Range: 87.5KHz-108.0MHz
- BT version 4.2
- Speaker: 45mm X 2
- Rated impedance: 40
- Speaker output: 3W x 2
- Power supply: AC110-240V, 50KHz/60Hz
- Power/Switch cable length: 2.5m
- Dimension of main unit/package: 189mm189mm37mm 1
- Net weight/Gross weight: 540g/900g
Troubleshooting:
-
The remote control does not work Make sure you’ ye already removed the battery insulating sheet on the remote control battery drawer.
Make sure the remote control aim at a suitable place: close to the pull switch area on the player Make sure the distance between the remote control and the CD player is within 6 meters. Check if the batteries inside the remote control are dead.
ATTENTION: Remote is not able to power the player on/off instead of pulling the power switch. -
The CD player does not work a. Check the power supply is connected successfully. If you are not using its attached USB adaptor please make sure the power is standard 5V/1.5-2.0A. b. If the player works under a situation with a large temperature difference, the laser head may be covered with mist and cause trouble. Please put aside the CD player for 1 hour until it becomes dry, then turn on the power and try to play CD again
-
CD function does not work Check if the format of your disc is the suitable one or check if your disc is old or broken. And make sure the disc is placed correctly. 14
Wall Mount
RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE
Before using this radio, read this guide which contains important operating instructions for safe usage and rf energy awareness and control for compliance with applicable standards and regulations.
Local Government Regulations
When radios are used as a consequence of employment, the Local Government
Regulations requires users to be fullyaware of and able to control their
exposure to meet occupational requirements. Exposure awareness can be
facilitated by the use of a product label directing users to specific user
awareness information. Your Retekess radio has an RF Exposure Product Label.
Also, your Retekess user manual or separate safety booklet includes
information and operating instructions required to control your RF exposure
and to satisfy compliance requirements.
Unauthorized modification and adjustment changes or modifications not
expressly approved by the party responsible for compliance may void the user’s
authority granted by the local government radio management departments to
operate this radio and should not be made. To comply with the corresponding
requirements, transmitter adjustments should be made only by or under the
supervision of a person certified as technically qualified to perform
transmitter maintenance and repairs in the private land mobile and fixed
services as certified by an organization representative of the user of those
services. Replacement of any transmitter component (crystal, semiconductor,
etc.) not authorized by the local government radio management departments
equipment authorization for this radio could violate the rules.
FCC Requirements:
-
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. -
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
CE Requirements:
-
(Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS
Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.retekess.com. -
Disposal
The crossed-out wheeled bin symbol on your product, literature, or packaging reminds you that in the European Union,all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.
IC Requirements:
License-exempt radio apparatus
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
RF Warning Statements
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
RF Exposure Information
- DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is an antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared.
- To avoid interference, turn off the radio in areas where signs are posted to do so.
- DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.
Avoid Choking Hazard
Small Parts. Not for children under 3 years.
Protect your hearing:
- Use the lowest volume necessary to do your job.
- Turn up the volume only if you are in noisy surroundings.
- Turn down the volume before adding a headset or earpiece.
- Limit the amount of time you use headsets or earpieces at high volume.
- When using the radio without a headset or earpiece, do not place the radio’s speaker directly against your ear
- Use care with the earphone may be possible excessive sound pressure from earphones and headphones can cause hearing loss
Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio’s volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.
Approved Accessories:
- This radio meets the RF exposure guidelines when used with the Retekess accessories supplied or designated for the product. The use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations.
- For a list of Retekess-approved accessories for your radio model, visit the following website: http://www.Retekess.com
MADE IN CHINA
https://retekess.com.ru/
Henan Eshow Electronic Commerce Co., Ltd
Add: 7/F, Sanjiang Building, No.170 Nanyang Road, Huiji District, Zhengzhou,
Henan, China
EU Importer: Germany Retevis Technology GmbH
Address: Uetzenacker 29,38176 wendeburg
Facebook: facebook.com/Retekess.ru
E-mail: support@retekess.com.ru
Web: retekess.com.ru
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>