KitchenAid KRMF536RPS Bottom Mount Refrigerator User Guide
- June 1, 2024
- KitchenAid
Table of Contents
KitchenAid KRMF536RPS Bottom Mount Refrigerator
Specifications
- Model: KRMF536R*
- Overall Height A: 70 1/8″ (1781 mm)
- Height – Top of Cabinet B: 68 3/4″ (1746 mm)
- Height – Bottom Mount Refrigerator: 48 5/8″ (1235 mm)
- Depth – Drawer Open D: 47 5/8″ (1210 mm)
- Depth – With Handles E: 36 3/8″ (924 mm)
- Depth – Without Handles F: 33 3/4″ (857 mm)
- Depth – Cabinet Only G: 29″ (737 mm)
- Width – Cabinet H: 35 3/4″ (908 mm)
- Width with Handles: 38 3/16″ (970 mm)
Product Usage Instructions
Electrical Requirements
WARNING: To prevent electrical hazards, follow these guidelines:
- Plug into a grounded 3-prong outlet.
- Do not remove the ground prong.
- Avoid using adapters or extension cords.
- Ensure the supply cord is intact and undamaged. If damaged,seek professional replacement.
Recommended Grounding Method:
- At 115V, 60Hz AC only 15A or 20A fused, grounded electrical supply is necessary.
- Use a dedicated circuit for the refrigerator and approved accessories.
- Avoid outlets controlled by switches and extension cords.
Location Requirements
Explosion Hazard: Prevent potential hazards by:
- Avoiding flammable materials and vapors near the appliance.
- Use non-flammable cleaners to prevent accidents.
Ventilation:
- Maintain a 1/2″ (1.25 cm) space on each side and at the top for proper ventilation.
- Allow a 1″ (2.54 cm) space behind the refrigerator and more if it has an ice maker.
- If installing next to a wall, leave a minimum 3 3/4″ (9.5 cm) gap for door movement.
Note: For detailed installation instructions,refer to the manual included with the product.
FAQs
Q: What should I do if my refrigerator keeps tripping the GFCI outlet?
A: If nuisance tripping occurs, leading to cooling loss and food quality
issues, dispose of the food and consider relocating the refrigerator to a non-
GFCI outlet.
DIMENSION
Model Size| Height Overall “A”| Height – Top of Cabinet
“B”
| Depth – Door Open 90° “C”| Depth – Drawer Open
“D”
| Depth – With Handles
“E”
| Depth – Without Handles
“F”
| Depth – Cabinet Only
“G”
| Width – Cabinet “H”| Width – Door Open 90° “I”
---|---|---|---|---|---|---|---|---|---
KRMF536R*| 701/8″ (1781 mm)| 683/4″ (1746 mm)| 485/8″ (1235 mm)| 475/8″ (1210
mm)| 363/8″ (924 mm)| 333/4″ (857 mm)| 29″ (737 mm)| 353/4″ (908 mm)| 383/16″
(970 mm)
ELECTRICAL REQUIREMENTS
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,fire, or electrical
shock.
Before you move your refrigerator into its final location, it is important to
make sure you have the proper electrical connection.
If the supply cord is damaged, it must be replaced by the manufacturer or it’s
service agent or a similarly qualified person. Do not use a cord that shows
cracks or abrasion damage along its length or at either the plug or connector
end.
Recommended Grounding Method
A 115 V, 60 Hz AC only 15 A or 20 A fused, grounded electrical supply is
required. It is recommended that a separate circuit serving only your
refrigerator and approved accessories be provided. Use an outlet that cannot
be turned off by a switch. Do not use an extension cord.
IMPORTANT: If this product is connected to a GFCI (Ground Fault Circuit Interrupter) protected outlet, nuisance tripping of the power supply may occur,resulting in loss of cooling. Food quality and flavor may be affected. If nuisance tripping has occurred, and if the condition of the food appears poor, dispose of the food.
NOTE: Before performing any type of installation or cleaning, or removing a light bulb, turn cooling off or turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to Off. On models with a digital temperature control, press the minus sign touch pads repeatedly until a dash (-) appears in both the freezer and refrigerator displays. Disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and turn cooling on or reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See the “Quick Start Guide”.
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
™ ©2024 KitchenAid. All rights reserved. The design of the stand mixer is a trademark in the U.S. and elsewhere. Used under license in Canada.