SLDBL0026-PIR Residential Bollards User Guide

SLDBL0026-PIR Residential Bollards

Product Information

Specifications

• Model: SLDBL0026-PIR
• Features:
  • Pyro-electric Infrared Sensor
  • Integrated Photo Electric Cell
  • 1 minute Sensor Run Time
  • Surface or spike mount option with Stainless Steel Trim

FAQ

• Q: What should I do if my light doesn’t turn on?
  • A: Check if the switch is turned on and ensure the battery is charged by exposing it to direct sunlight for 1-2 days.
• Q: How long should I charge the light initially?
  • A: It is recommended to charge the light in direct sunlight for 1-2 days before initial use.
• Q: Can I install the light under a street light?
  • A: It is best not to install these lights underneath a street light or porch light as it may interfere with the automatic day-night sensor triggering.

PACKAGE CONTENTS

1. 1 x Light Fitting
2. 1 x Stainless Steel Base Trim
3. 1 x Ground Spike

FEATURES

1. Pyro-electric Infrared Sensor
2. Integrated Photo Electric Cell
3. 1 minute Sensor Run Time
4. Surface or spike mount option with Stainless Steel Trim

INSTALLATION METHOD

1. Remove contents from packaging
2. To locate the “ON/OFF” switch, twist the solar panel head off the fitting and flip upside down (See in FIGURE 1)
3. Switch your fitting into “ON” position
4. Decide on your installation process, either Surface mount or Spike mount
5. Locate and use the following accessories:
6. Surface Mount

  * Remove contents from packaging, connect the stainless steel trim to the bottom of the post & secure to a solid base
2.  **Spike Mount**
  * Remove spike & re-install stainless steel trim, press spike into the underside of the bollard to enable you to spike the fitting into soil or grass  

NOTE: The Spike Mount is located INSIDE the bollard post. The piece inside the bottom must be inverted (See FIGURE 2)

6.  Remove protective membrane from solar panel & your light is now ready for use

IMPORTANT NOTES

• Please ensure you place your solar panel in a location where it can achieve a minimum of 6HRS DIRECT SUNLIGHT
• Be aware that on overcast/cloudy days, the solar panel will still charge. However, not as efficiently as a sunny day, so the battery may not reach full capacity. Therefore, your light may turn off earlier than specified
• It’s best not to install these lights underneath a street light, porch light etc. because this may stop the automatic day-night sensor triggering and result in your lights not turning on

TROUBLESHOOTING

Contact

• Customer Service Number: 1300 135 911
• www.solarlightingdirect.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>