FridaBaby 61-067 Digital Thermometer User Manual

June 1, 2024
fridababy

FridaBaby 61-067 Digital Thermometer

FridaBaby-61-067-Digital-Thermometer-product

FEVER OR FINE IN A FLASH

  • High temps are no joke. Is your munchkin just a bit flushed or is this a full-blown fever fest? You need answers RIGHT? NOW. And we’re here in the trenches with you. That’s where our 3-in-1 True Temp Thermometer comes in, with rectal, oral, and armpit reading functions. It gives you both a 10-second quick read and a 30-second final read with a single insertion.
  • Taking a temp rectally is the only way to go with babies up to one year and is recommended by the AAP as the best method until age three. Middle of the night fever fears? No problem. The built-in LED light lets you see where you’re going and what you’re doing. (Important for rectal readings…) Worried about going too deep? The insertion stopper’s got you covered. Can’t remember what your little one’s temp was an hour ago? Memory Mode to the rescue!
  • We’ve thought of it all so that you don’t have to.
  1. Manufactured for Fridababy LLC, Miami, FL 33137
  2. Love it? Leave a review fridababy.com
  3. Thermometer questions? [email protected]

Warning:

  • Read instructions thoroughly before using a digital thermometer.
  • Choking Hazard: Thermometer battery door and battery may be fatal if swallowed. Do not allow children to use this device without parental supervision.
  • Do not use a thermometer in the ear. Designed use is for rectal, oral, and armpit (axillary) readings only.
  • Do not place the thermometer battery near extreme heat as it may explode.
  • Remove the battery from the device for long-term storage.
  • The use of temperature readings for self-diagnosis is dangerous. Consult your doctor for the interpretation of results.
  • Do not attempt measurements when the thermometer is wet as inaccurate readings may result.
  • Do not bite the thermometer.
  • Do not attempt to disassemble or repair the thermometer.
  • After each use, disinfect the thermometer.
  • Do not force the thermometer into the rectum.
  • Do not use a thermometer orally after being used rectally, without proper sanitation.
  • For children who are two years old or younger, do not use the device orally.

Please read and save these instructions

  • This product is not intended to diagnose or treat any health problem or disease and should not be used as a substitute for the consultation and advice of a physician or other medical professional.
  • Thermometers should only be used under the supervision of an adult.
  • Before use, it is recommended that the patient avoid eating, drinking, smoking or exercising for at least twenty minutes prior to taking a measurement. Never walk, run or talk during a measurement.

This appliance conforms to the following standards:

  • ASTM E1112
  • ISO 80601-2-56 – Part 2-56
  • IEC 60601-1-11 – Part 1-11
  • IEC 60601-1-2(EMC)
  • AAMI/ANSI ES60601-I (Safety Standards)
  • ISO 13485 Certified Manufacturing Facility

WHAT’S IN THE BOX

  • 1 Thermometer,
  • 1 3V Battery (CR2032),
  • 1 Storage Case,
  • 1 Manual, 1 Quick Start Guide

Product illustration

FridaBaby-61-067-Digital-Thermometer-fig \(1\)

Portable and mobile RF communications can affect the device. The device needs special pre-cautions regarding EMC according to the EMC information provided in the accompany documents.

Specifications

  • Type: Digital Thermometer
  • Measure Range: 89.6˚F – 111.0˚F (32.0˚C – 43.9˚C) (˚C / ˚F chosen by user)
  • Accuracy: ±0.2˚F (0.1 C) during 95.9˚F ~ 107.6 ˚F (35.5˚C ~ 42.0˚C) at 64.4˚F ~ 82.4˚F (18˚C ~ 28˚C ) ambient operating range + 0 .4˚F (0.2˚C) for other measuring and ambient operating range. Procedures for determining the accuracy of the thermometer are available upon request.
    • Accuracy: +/- .2F in laboratory testing as stated
  • Operating mode: Predictive Mode
  • Display: Liquid crystal display, 3 1/2 digits
  • Memory: For storing the last 10 values
  • Battery: One 3.0 V DC CR2032 battery
  • Battery life: Approx 200 hours
  • Dimension: 160mm (open) x 32mm x 26mm. (LxWxD)
  • Weight: Approx. 1.35oz including battery
  • Ambient operating range:
    • Temperature: 41˚F – 104 F (5˚C ~ 40˚C)
    • Relative humidity: 15% ~ 95%RH
  • Storage and transportation condition:
    • Temperature: -4˚F ~ 131˚F (-20˚C ~ 55˚C)
    • Relative humidity: 15% ~ 95%RH
  • Ingress Protection Rating: IP 22
  • Classification: Type BF
  • Model: 61-067
  • Gift Box: 92-61003 11/19
  • Instruction Manual: 93-1471 03/20

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesirable operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FridaBaby-61-067-Digital-Thermometer-fig \(2\)

Directions

For Rectal Use: We want the best for you and your family. The American Academy of Pediatrics (AAP) recommends that for at least the first year of the baby’s life (though up to three is best), temp checks should only be done rectally. That’s why our thermometer defaults to Rectal (“rct”).

  • Confirm that the thermometer is still in Rectal (“rct”) mode. (See below to CHANGE MODE.)
  • Before inserting the thermometer, lubricate the silver tip. We suggest coconut oil or other natural lubricants. Press against the small bump on the thermometer probe to turn on the LED light for easy visibility.
  • Then, lift the baby’s legs and gently insert the thermometer tip up to the insertion stopper.
  • Do not insert past the point where you feel resistance (usually from the baby’s lower cheeks).

For Oral or Underarm Use:

  • Confirm that the thermometer is in the correct mode: Oral (“orl”) or Underarm (“udr”). (See below to CHANGE MODE.)
  • Press the white probe button on the side and flip the tip into oral/underarm mode.
  • Oral (recommended only for ages four and up): Place the thermometer tip under the tongue.
  • Underarm: Place the thermometer probe with tip in the armpit and keep the arm firmly pressed against the side.

Note: To ensure an accurate temperature, always wait for the 30-second reading in underarm mode (the 10-second reading may not be reliable due to environmental factors, like air temperature).

  1. Press the Power Button to turn the thermometer on.

  2. Your last temperature reading will show on the LCD screen.

  3. You’ll see the selected reading mode on the screen (“rct,” “orl,” “udr”).

  4. You’ll see “—” and either F˚ or C˚ on the top right of the screen. (See below to CHANGE UNIT.)

  5. When you are in the right mode and unit settings, you’re ready to go.

    • Taking baby’s temperature with a 10 or 30-Second reading:

    • 10-Second read: Quick check Insert the thermometer into the appropriate body part based on the mode setting (“rct,” “orl,” “udr”). Screen will show a loading “wheel” while registering the temperature.
      The thermometer will beep and flash a temperature reading after 10 seconds.

    • 30-Second read: Final temperature check

    • Keep the thermometer inserted. The screen will continue to flash for another 20 seconds.

    • Once 30 seconds have passed, the reading is complete. The thermometer will beep and display the final temperature reading.

  6. Wait a minimum of one minute before attempting a new measurement.

  7. Press the Power Button to turn off. This can be done at any point during a reading.

  8. Remember to sanitize the thermometer before and after all readings, especially if you are using it both rectally and orally.

Change unit: To change from Fahrenheit (°F) to Celsius (°C), turn it on, when the last temp reading flashes, hold the button for 3 seconds. Press button once to scroll to next mode. Once on preferred mode, press button for 3 seconds to confirm selection.

FridaBaby-61-067-Digital-Thermometer-fig \(8\)

Change mode: The thermometer defaults to rectal (“rct”) mode.

To change from current setting:

  1. Turn it on and wait for the screen to light up.
  2. Hold the button for 3 seconds when the mode (“rct,” “orl,” “udr”) flashes.
  3. Press the button once to scroll to next mode. Once on preferred mode, wait 3 seconds for the thermometer to register the selected mode OR press the button for 3seconds to confirm selection and proceed with the reading.

In order to achieve the most accurate results, always use the thermometer in the mode that corresponds with the method you will use: Rectal (“rct”), Oral (“orl”), or Underarm (“udr”).

Memory mode: To enter, press and hold the button for 3 seconds when the device is off. Once in memory mode, press the button once to scroll to the next memory reading. Press and hold the button for three seconds to turn off.

Call your child’s doctor right away if your child has a fever and:

  • Is younger than 3 months (12 weeks) and has a temperature of 100.4°F (38.0°C) or higher.
  • If, at any age, the fever rises above 104°F (40°C) repeatedly.

Battery replacement

  1. Replace battery when “ ” appears in the lower right corner of LCD display.
  2. Pull Battery door off and open Battery chamber.
  3. Discard battery lawfully. Replace with new 3.0V DC button type CR2032, or equivalent.
  4. Slide battery chamber back into place and attach battery door.

Cleaning and disinfection

Wipe the thermometer with a soft clean cloth. For stubborn stains, wipe the thermometer with a cloth that has been dampened with water or a neutral detergent and wipe thoroughly. Finish by wiping with a soft dry cloth. For disinfection, 75% Ethanol or Isopropyl alcohol can be used. Observe the following to prevent damage to the thermometer.

  • Do not use benzene, thinner, gasoline or other strong solvents to clean the thermometer.
  • Do not attempt to disinfect the sensing section (tip) of the thermometer by immersing in alcohol or in hot water (water over 122°F / 50°C).
  • Do not use ultrasonic washing to clean the thermometer.

Troubleshooting / Error codes

Performance may be degraded should one or more of the following occur:

  • Operation outside stated temperature and humidity range.
  • Storage outside stated temperature and humidity range.
  • Mechanical shock.
  • Patient temperature is below ambient temperature.

Do not dispose of used batteries in the trash. Consult your local recycling center for the proper way to dispose of batteries in your area. Keep used batteries away fromchildren, pets and excessive heat.

Error: Problem/Cause: Solution

Error Problem/Cause Solution
Hi The measured temperature is above 109.2°F (42.9°C). Results are

above range; wait several minutes and attempt new measurement.
– – –| The measured temperature is below 89.6°F (32°C).| Results are below range; wait one minute and attempt new measurement.
Err| The system is not functioning properly.| Attempt new measurement; if error persists, contact Customer Care at [email protected].
[ ]| Dead battery: Battery icon is flashing, can’t be measurable.| Check battery and replace with a new battery if necessary.

Normal body temperature / Fever indicator

  • Body temperature can vary from 97°F and 100.0°F and still be considered normal. The medically accepted ‘normal’ body temperature is 98.6°F Body temperature is commonly lower in the upon waking than at any point during the rest of an individual’s waking hours.
  • Temperature readings will vary based on the body location point of the reading. Oral temperature readings between 97°F (36.1°C) and 100°F (37.7°C) are considered normal. A rectal temperature reading is generally 1°F (0.5°C) higher; while an underarm, or axillary, temperature will be 1°F (0.5°C) lower.
  • A fever is defined as a body temperature that is elevated above the normal for that person. It is important to determine what is normal for an individual before determining if a fever is present. Tracking an individual’s temperature on a consistent basis, at the same body site and at the same time every day when the person is well or healthy will help determine an individual’s normal temperature.

FREQUENTLY ASKED QUESTIONS

What is the measuring mode of the FridaBaby 61-067 Digital Thermometer?

The FridaBaby 61-067 Digital Thermometer can measure temperature orally, rectally, and under the arm.

How long does the FridaBaby 61-067 Digital Thermometer take to display a temperature reading?

The FridaBaby 61-067 Digital Thermometer provides quick readings, usually within a few seconds.

Is the FridaBaby 61-067 Digital Thermometer suitable for newborns?

Yes, the FridaBaby 61-067 Digital Thermometer is designed to be gentle and safe for use with newborns.

Does the FridaBaby 61-067 Digital Thermometer have a flexible tip?

Yes, it features a flexible tip for comfortable measurements.

What type of battery does the FridaBaby 61-067 Digital Thermometer use?

The FridaBaby 61-067 Digital Thermometer uses a standard button cell battery.

How do I clean the FridaBaby 61-067 Digital Thermometer?

Clean the thermometer with soap and warm water or disinfect it with rubbing alcohol after each use.

Can the FridaBaby 61-067 Digital Thermometer switch between Fahrenheit and Celsius?

Yes, the FridaBaby 61-067 Digital Thermometer can toggle between Fahrenheit and Celsius measurements.

What should I do if the FridaBaby 61-067 Digital Thermometer gives an inconsistent reading?

Ensure the thermometer is correctly positioned and try taking another reading for accuracy.

Is there an auto-shutoff feature on the FridaBaby 61-067 Digital Thermometer?

Yes, it includes an auto-shutoff feature to conserve battery life.

What is the warranty period for the FridaBaby 61-067 Digital Thermometer?

The FridaBaby 61-067 Digital Thermometer typically comes with a one-year warranty.

How accurate is the FridaBaby 61-067 Digital Thermometer?

It is designed to offer accurate readings within a small margin of error.

What alerts does the FridaBaby 61-067 Digital Thermometer provide?

It usually beeps to indicate that a reading has completed.

Is the FridaBaby 61-067 Digital Thermometer waterproof?

It's water-resistant for easy cleaning but not fully waterproof.

Does the FridaBaby 61-067 Digital Thermometer come with a storage case?

It typically comes with a protective case for hygiene and safety.

How do I know if the FridaBaby 61-067 Digital Thermometer is turned on?

It will display a startup sequence on the digital screen when activated.

Can I use the FridaBaby 61-067 Digital Thermometer for pets?

It's designed for human use, so it's best to use a thermometer specifically intended for pets for that purpose.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:FridaBaby 61-067 Digital Thermometer User Manual

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

fridababy User Manuals

Related Manuals