OHNIYOU GLX073 Outdoor Ceiling Fan with Light User Manual

OHNIYOU GLX073 Outdoor Ceiling Fan with Light

TOOLS REQUIRED

This manual is designed to make it as easy as possible for you to assemble, install, operate and maintain your ceiling fan.

WARNING
Before you start putting together your ceiling fan, be sure to check out the section on the correct wiring process for your fan (page 5). If you’re not confident in your wiring skills or don’t have enough experience, it’s a good idea to have a licensed electrician install your fan for you

Materials
The wiring outlet box and box connectors should meet the specifications outlined in the local building code. For the minimum wire, a 3-conductor (2-wire with ground) of the appropriate size must be used as per the guidelines.

• Installed Wire Length: Wire Size A.W.G
  

• Up toS0ft: 14

• 50-100 ft: 12

Note: Put all small parts into a small container to prevent loss. if you lose any parts, please look for help from the nearby hardware store.

Package Includes

Check to see that you have received the following parts:

Note: Some parts are already installed on the fan, not all scattered

1. Mounting Bracket
2. Receiver
3. Canopy
4. Canopy Screws
5. 7.8 & 13.7″ Downrod
6. Down rod latch
7. Hairpin buckle
8. Motor cover
9. Motor Body
10. Metal disc
11. Metal disc screws
12. LED light kit
13. Light cover
14. Blades*S
15. Blades Screws
16. Remote Controls
17. Wood Screws
18. Expansion Screws

MOUNTING BRACKET INSTALLATION

Tools Required: Phillips Screwdriver, Pair of Pliers, Straight slot screwdriver, Adjustable Wrench, Step Ladder and Wire Cutters.

INSTALL THE MOUNTING BRACKET
For your own safety and to prevent damage, please make sure that the blade has a clearance of 7 feet (2.13 meters) from the floor and 18 inches (45.72 centimetres) from any wall or obstacle at the hanging location.

1. Fix the mounting bracket to the reserved ceiling with screws
2. Please refer to Fig.2 for instructions on how to mount when the ceiling is angled at a maximum of 15 degrees.

NOTE: The mounting bracket installed must be capable of supporting a weight of 1 00lb or more.

Assemble Fan Blades

Tips: Check out the assembly video on the Amazon product page

1. Unplug the light strip from the socket and set it aside.
2. Loosen the screws on the 10-metal disc and set it aside.
3. identify the front and back of fan blades The side that says “THIS SIDE UP” should face the ceiling
4. Line up the metal disc with the screw, snap in place, and then tighten the screw
5. Connect the light kit and place it on the metal disc to fix it
6. Select a 7.8 or 13.7 in downrod, put 3 canopies and 8 motor cover through the downrod in the first step, and then put the wires through the downrod. Thread the 6 latches through the downrod and snap it with the 7 hairpin. Then tighten the screws on both sides.
7. Turn the I ig ht cover to the right to tighten it

How to Operate Your Ceiling Fan

1. To get the fan working, insert a AAA/1.5V battery (not included) into the handheld remote. Keep the remote away from high temperatures and moisture.
2. Remote functions:

DC converter (bedroom) fan and other remote control instructions
TMALL (2.4G) dimming and color mixing fan controller

• Pairing Method:
  Turn on the wall switch. Hold the “SETUP” key for about 3s, if there are 2 beeping sounds from the fan means the pairing is successful.

• Reset and Re-pairing:
  Turn off the wall switch, and then turn on 3s later. Hold the “SETUP” key for about 3s, if there are 2 beeping sounds from the fan means the pairing is successful.

• Warning Sign
  The remote control can not be effectively controlled please check the battery for long-term non-use please remove the battery.

If you want the airflow in the opposite direction, simply press the R/F button on the remote control and the fan will come to a stop before rotating in the opposite direction.

SAFETY RULES

1. Before you get started, make sure to turn off the power to the fan at the main circuit panel to reduce the risk of electric shock.
2. All wiring must meet the standards of local or national electrical codes and should be installed by a qualified electrician.
3. When handling fan parts with sharp edges, it’s a good idea to wear gloves to avoid any personal injuries.
4. Make sure the installation site provides enough space for the blades to rotate freely, with at least 7 feet (2.13 meters) of clearance between the floor and the tips of the fan blades. Mount the fan so that the tips of the blades are at least 18 inches (45.72 centimetres) away from walls or other structures.
5. WARNING: Only mount the fan to an outlet box marked acceptable for fan support, and use the provided mounting screws. Most outlet boxes for lighting fixtures are not suitable for fan support and may need replacement. If in doubt, consult with a qualified electrician.
6. Ensure that the outlet box and ceiling support structure are securely mounted and capable of supporting at least 45 kilograms.
7. Be cautious when working around or cleaning the fan to avoid personal injury or damage to the fan and other items.
8. Use a dry dust cloth or a lightly dampened cloth for cleaning the fan or fan blades. Avoid using water or detergents.
9. After making electrical connections, carefully push the spliced conductors upward into the outlet box. Spread the wires apart, placing the grounded conductor andthe equipment-grounding conductor on one side of the outlet box.
10. Electrical diagrams are provided for reference only.
11. The fan can be installed in indoor spaces or covered outdoor areas like patios, screened porches, and sunrooms.

Troubleshooting

WARNING
To ensure your safety, before attempting to troubleshoot, switch off the power supply at the fuse box or circuit breaker.

Maintenance

Regularly cleaning your new ceiling fan is all that’s needed to keep it in good condition. To clean it, simply use a soft brush or lint-free cloth to avoid scratching the surface. You don’t need to use any harsh cleaning products, as they could damage the finish.

CAUTION
Avoid using water to clean your ceiling fan as it may harm the motor or the surface and pose a risk of electric shock.

Warranty

Dear valued customer,
OHNIYOU assures you that this product is free from any material and workmanship defects for a period of 1 year from the date of purchase. Please note that this warranty will not apply if the product has been mishandled, accidentally damaged, or used in any way other than intended. Please feel free to contact us: at [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>