ADI Icron 7044 USB Matrix Switcher User Guide

ADI Icron 7044 USB Matrix Switcher

Specifications

• Model: PolarisTM 7044
• Power Adapter: 24V 2.71A
• Interfaces: RS232, Ethernet, USB-C
• Maximum Cable Length: 100m

Product Usage Instructions

Setup

Before starting, ensure you have installed any required drivers for your USB devices.

1. Place the Polaris Matrix in the desired location and connect it to a power source using the provided 24V 2.71A adapter.
2. Connect the RS232 or Ethernet connection to your desired controller or network.
3. Connect up to four hosts and four devices to the Polaris Matrix as needed.

Testing USB Connections

• Optionally, you can use the test button on the front faceplate to test USB connections. Refer to the online user guide for detailed instructions.

Configuring the Polaris Matrix

• Use APIs on the RS232 or APIs and GUI on the Ethernet interface to configure the Polaris Matrix according to your requirements.

Note on USB Ports

• For higher-power devices, such as USB-powered cameras or Mass Storage devices, connect them to the USB-C ports for higher power output.

FAQ

• Q: Where can I find more detailed information about configuring and operating the product?
• A: For more in-depth guidance, refer to the complete online user guide at icron.com/oem7044.
• Q: How can I get technical support for the Polaris Matrix?
• A: Visit icron.com/support for technical assistance.
• Q: Where can I direct sales or general inquiries about the product?
• A: For sales or general inquiries, visit icron.com/contact.

Package Contents

• Polaris 7044 Matrix
• 24V 2.71A International Power Adapter
• Country-Specific AC Power Cord
• RS232 Mating Connector
• Default Values Label (to affix where desired)
• Quick Start Guide

For more information about configuring and operating this product, refer to the complete online user guide at icron.com/oem7044.
For technical support, visit icron.com/support.
For sales/general inquiries, visit icron.com/contact.
Before starting, install any required drivers for your USB device(s).

Using Instructions

• Place the Polaris Matrix where desired connect it to a power source using the included 24V 2.71A adapter and tighten the locking ring.

• Connect RS232 or Ethernet connection to the desired controller or network.

• Connect up to four hosts to the Polaris Matrix.

• Connect up to four devices to the Polaris Matrix.

Optional: Use the test button on the front faceplate to test USB connections (refer to the online user guide for more details).

Note: Connect higher power devices (e.g. USB powered camera, Mass Storage etc.) to the USB-C ports for higher power output.

• Use APIs on the RS232 or APIs and GUI on the Ethernet interface to configure the Polaris Matrix as necessary.

Default Values

1. RS232 set to 9600 baud; 1 Stop; No Parity
2. IP set to Static with the following parameters:
   • IP: 192.168.0.254
   • Subnet Mask: 255.255.255.0
   • Gateway: 192.168.0.1
   • Port: 23
3. Auto Switching Off
4. GUI, Network API, and RS232 Interfaces Unlocked
5. UserID: USER
6. User Password: USER
7. AdminID: ADMIN
8. Admin Password: ADMIN

FCC STATEMENT

FCC Radio Frequency Interference Statement Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received including interference that may cause undesired operation.

CE Statement
We, Icron, an Analog Devices brand, declare under our sole responsibility that the Polaris™ 7044, to which this declaration relates, conforms with European Standards EN 55032, EN 55035, EN 61000, EN 62368-1 and RoHS Directive 2011/65/EU + 2015/863/EU

Industry Canada Statement

• This Class A digital apparatus complies with Canadian ICES-003.
• CAN ICES-3 (A) / NMB-3 (A)

WEEE Statement
The European Union has established regulations for the collection and recycling of all waste electrical and electronic equipment (WEEE). Implementation of WEEE regulations may vary slightly by individual EU member states. Please check with your local and state government guidelines for safe disposal and recycling or contact your national WEEE recycling agency for more information.

Product Operation and Storage
Please read and follow all instructions provided with this product and operate for intended use only. Do not attempt to open the product casing as this may cause damage and will void the warranty. Use only the power supply provided with this product. When not in use, this product should be stored in a dry location between -20°C and 70°C. Product user guides are available online at icron.com.

Limited Hardware Warranty

Icron warrants that any hardware products accompanying this documentation shall be free from significant defects in material and workmanship for two years from the date of purchase. Icron’s hardware warranty extends to Licensee, its customers and end users. The warranty does not include repair of failures caused by misuse, neglect, accident, modification, operation outside a normal operating environment, service of the device by non-authorized servicers or a product for which Icron is not responsible.

CONTACT

• Icron | An Analog Devices Brand
• 4664 Lougheed Hwy., Suite 221
• Burnaby, BC V5C 5T5
• Canada
• t +1 604.638.3920
• Visit icron.com.

Copyright © 2024 Analog Devices, Inc. All Rights Reserved.
Trademarks and registered trademarks are the property of their respective holders. ADI/Icron assumes no responsibility for errors that may appear in this document. Information contained herein is subject to change without notice.
90-01943-A01

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>