SPARC TECHNOLOGIES VIKING TWO App User Guide

SPARC TECHNOLOGIES VIKING TWO App

Specifications

• Product Name: Viking-Two
• Charging Station Standard: IEC62196-2
• Connections: VDE-AR-E2623-2-2, 4mm Banana plug test lead connectors, Micro USB Type-B charging connector, Low Energy wireless interface
• Power Source: AC input: 230V/400VAC 850mAh Lithium Li-ion battery, Input 5V DC, 0.5A (Device charging)
• Protection: IP41 Indoor use only
• Materials: ABS, Thermoplastic UL94 Pollution degree 2

Product Usage Instructions

Getting Started:

Power on the device by pushing the power switch on the left side of the product.

The display will show the product logo and the device is ready to connect to a charging station socket.

Selecting Modes:

Select a mode to test and simulate on the charging stations. The modes include:

• Ready to start test
• Simulate charging
• Disconnected (displays current if available, status on L1, L2 & L3)
• Connected (simulates a connected status)
• Charging (simulates charging status)
• Cable Fail (simulates fail on charging cable)
• Pilot Fail (simulates pilot fail from vehicle)
• Select Cable coding (sets the cable coding for tests)

Connecting to Smartphone:

1. Install the Viking Two Application
2. Open Viking Two application
3. Turn on Device
4. Device ID will show in application
5. Tap on Device ID (5 digits)

Charging the Device:

Insert a Micro USB charging cable at the bottom of the device.

After use, remember to turn the device off by pushing the power switch to maximize battery life.

Frequently Asked Questions

Q: Where can I find technical contact details for Viking-Two?

A: Viking-Two is developed and produced by Sparc Technologies AS. You can find their office address at Lagerveien 9, 4033 Stavanger, Norway. Contact them via email at post@viking-two.com or visit their website at www.viking- two.com.

Q: What safety precautions should I follow while using Viking-Two?

A: Always wear protective cap when not in use. Do not immerse the device in water or expose it to direct water. Handle the product carefully and protect it from heat, oil, or sharp edges. Only use it with CE approved charging stations.

Viking Two is a test instrument for charging stations for Electric vehicle supporting mode 3 Type 2 charging. This product is ready out of the box but can also be used with Android™ and Apple® IOS™ smartphones.
This manual contains important information about the use of the equipment. All operators are encouraged to read the manual in its entirety. Keep these instructions in a safe place in the event of resale this manual should be supplied with this equipment.

APPLICATION

Testing and diagnosis of charging stations for electric vehicles (EV). By using the product display interface or Android™ or Apple® IOS™ smartphone the Viking Two will simulate and test charging operations on an EV charger and let the operator switch between different modes and read real-time data.

GENERAL SAFETY REGULATIONS

Always wear protective cap when not in use. Do not immerse the device in water and avoid direct water.
Manage product carefully and protect it from heat, oil, or sharp edges. Only to be used with CE approved charging stations.

INCLUDED PARTS

• Viking Two testing equipment
• Micro USB charging cable.
• Carry case.

ELECTRIC SHOCK HAZARD. This equipment is to be services by trained personnel only.

INSTALLATION

When unpacking make sure the device has not been damaged in transport. See www.viking-two.com for more information. We recommend charging the device for up to 1 hour the first time, to fully charge the lithium Li-ion battery. The smartphone App is available on Google play™ & Apple® App store™

TECHNICAL DATA

• PRODUCT NAME:
  Viking-Two

• CHARGING STATION STANDARD:
  IEC62196-2

• CONNECTIONS:

  • VDE-AR-E2623-2-2,
  • 4mm Banana plug test lead connectors
  • Micro USB Type-B charging connector.
  • Low Energy wireless interface

• POWER SOURCE:

  • AC input : 230V/400VAC
  • 850mAh Lithium Li-ion battery
  • Input 5V DC, 0.5A (Device charging)

• PROTECTION:

  • IP41
  • Indoor use only

• MATERIALS:
  ABS, Thermoplastic UL94 Pollution degree 2

• OPERATIONAL TEMP. RANGE:

  • 20 – +45 °C
  • 80 %RH Humidity condition

GETTING STARTED

This equipment intended used by operator only

• Power on the device by pushing the power switch on the left side of the product.
• The display will now show the product logo and the device is ready to connect to charging station socket.
• Select mode to test and simulate on the charging stations.
  The modes are listed below

• Disconnected
  Will display current if available, status on L1, L2 6 L3

• Connected
  Will simulate a connected status

• Charging
  Will simulateSelect mode to test and simulate on the charging stations.
  The modes are listed below charging status

• Cable Fail
  Simulate fail on charging cable

• Pilot Fail
  Simulate pilot fail from vehicle

• Select Cable coding
  Will set the cable coding for tests

How to connect to smartphone.

1. Install the Vikign Two Application
2. Open Viking Two application
3. Turn on Device
4. Device ID will show in application.
5. Tap on Device ID (5 digits)

How to charge device
Insert a Micro USB charging cable at the bottom of the device
After use, please remember to turn the device off by pushing the power switch, this to maximize battery life.

SERVICE AND MAINTENANCE

Please deliver the equipment to authorized service personnel if it needs repair, service or maintenance.
See www.viking-two.com for more information.

TRANSPORT AND STORAGE

Keep the product dry and frost free, not over + 40 ° C, out of reach of children and other unauthorized persons.
Please use the products carry case when not in use and/or during transport. Clean the equipment with a soft, dry cloth. The cloth can be washed in soapy water if the equipment is very dirty.
NB Never use chemicals to clean – it can damage your equipment viewable. Avoid violent shock during use and/or transportation.

TECHNICAL CONTACT DETAILS
Viking-Two is developed and produced by Sparc Technologies AS.

Office Address:
Lagerveien 9, 4033 Stavanger, Norway

E-mail:
post@viking-two.com

Website:
www.viking-two.com

References

• Viking Two - EVSE testing

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>