Blagdon 1054928 Mocha Corner and Black Aluminium Instructions

Blagdon 1054928 Mocha Corner and Black Aluminium

• www.blagdonwatergarden.co.uk
• www.pondaquariumproblemsolver.co.uk/blagdon

Getting to know your Affinity living feature pool

Part List

Also Available

Step-by-Step Guide

Step 1
Clear the chosen area of debris and any sharp objects that could puncture the liner.

Step 2
Place down the supplied underlay and layout all parts – check the quantities against the parts table.

Step 3
Connect the two A rails to a 90o trident connector.

Step 4
Insert a 90o leg and lock in place with the supplied keys – ensure the end with the sticker is pointing up on every leg.

Step 5
Connect a 90o trident to one of the A rails and attach a B rail – insert a 90o leg and lock it into place with the keys.

Step 6
Connect a 135o trident to this B rail, attach the C rail – insert a 135o leg, and lock into place with the keys.

Step 7
Connect the last 135o trident to the C rail, and connect the last 90o trident to the last B rail.

Step 8
Insert the B rail into the remaining gap – connecting the 90o trident to the A rail. Insert the 90o and 135o legs into the appropriate positions and lock into place with the keys.

Step 9
Insert the A panels (without windows) across the legs on the A rails.

Step 10
Slide the A panels (without windows) into the slots on the legs of the A and B rails.

Step 11
Slide the B panels (with windows) into the slots on the legs of the C rails.

Tip: To make installation of the leg cross braces easier, allow the weave panels to warm up before use – place in direct sunlight for 20-30 minutes, or place them in an airing cupboard overnight if building the pool during the winter.

Step 12
Slide the C panel (with window) into the slots on the legs of the D rail – ensure that all panels are pulled down to the top rails.

Step 13
Insert the leg cross braces labeled A across the gaps between the legs of the A rails – lock them in place with the keys.

Step 14
Insert the leg cross braces labeled B across the gaps between the legs of the B rails – lock them in place with the keys.

Step 15
Push the supplied feet onto the bottom of the legs.

Step 16
Using the strengthening wire, hook a loop over the foot of one of the 90o legs holding an A and B rail. Draw it across to the opposite 90o leg, and hook the other loop over the foot.

Step 17
Between two people turn the frame over.

Step 18
Place the liner bag inside the frame and open it up – turn the liner to align the clear windows with the portholes on the weave panels.

Step 19
Working around the liner hook the eyelets onto the hooks on the trident connectors.

Step 20
Using plant basket fixing pins, pin up the rest of the liner eyelets onto the vertical face of the top rails.

Step 21
Using the plant basket fixing pins attach the plant baskets to the underside of the top rail.

Step 22
Place the Inpond filter into the pool and run the cables out of the back corner.

FOUNTAIN INSTALLATION

Step 23
Attach the fountain fittings with your chosen fountain head to the Inpond following the instructions in the Inpond manual, fill the pond with dechlorinated water, turn on the power, and enjoy.

OR WATERFALL INSTALLATION

Step 24
Attach the waterfall bracket to the waterfall clips.

Step 25
Clip the waterfall bracket onto the top rail across the back corner (ensuring the cables for the filter are in between the clips. Attach the supplied waterfall.

Step 26
Connect the waterfall hose to the Inpond outlet, fill the pond with dechlorinated water, and enjoy.

Tip: Use the flat face of the provided tool to make it easier to push in the plant-fixing pins.

affinity accessories

To keep your Affinity Pool windows clean, use ONLY the Affinity anti-scratch window cleaning pads code 1051200. Any other material may scratch or damage the windows. Polymer wool pads supplied are for the Inpond 5 in 1 filter, (see instruction manual). All these items are available as replacements from your retailer.

For further information, see our website:www.blagdonwatergardening.co.uk

Guarantee

This product is guaranteed against defects in material and workmanship for 3 years from the date of purchase, under normal usage. The guarantee DOES NOT APPLY in case of improper use, negligence, lack of maintenance, or accidental damage to the Affinity Pool. If the Affinity Pool fails due to a manufacturing fault within this period it will be either repaired or replaced free of charge. Liability is limited to the replacement of the faulty product only; no other costs will be reimbursed. This guarantee is not transferable and does not affect your statutory rights. This guarantee does not confer any rights other than those expressly set out above. Excludes consumable parts (pump Impellor, LED light & UVC lamp). If any parts are needed, spares are available from your retailer. Please see the Inpond 5 in 1 3000 instructions for more information and part descriptions.

Environment-Friendly Disposal
You can help protect the environment! Please remember to respect the local regulations and hand in any non-working electrical equipment to an appropriate waste disposal center.

Consumer Advice Contact Information
Interpet (Blagdon) Consumer Advice Department, Vincent Lane, Dorking, Surrey RH4 3YX

• E-mail: customercare@interpet.co.uk
• www.blagdonwatergardening.co.uk

IMPORTANT: PLEASE ATTACH PROOF OF PURCHASE TO THIS MANUAL AND FILE IN A SAFE PLACE. Affinity feature pools have been designed by a leading British water gardening company. Over half a century of fish keeping and water gardening knowledge is brought together in this product, so your DESIGN can be assured of a successful, creative water feature.

References

• Home | Blagdon Water Gardening
• Blagdon Problem Solver - Pond Aquarium Problem Solver
• Pond Equipment and Pond Filtration Equipment - Water Gardening Direct

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>