BYOX T188 Children Tricycle User Manual

BYOX T188 Children Tricycle

Product Specifications

• Model: Summer T188
• Item No.: T188
• Manufacturer: BYOX
• Recommended Battery: 2 x AA 1.5V (not included)
• Compliance Standards: N 711:2014+A1:2018; EN 71-2:2020; EN 71-3:2019+A1:2021

Product Usage Instructions

Assembly Steps

1. Follow the provided assembly steps in the manual to set up the tricycle.

Product Functions

Ensure you understand the various functions of the tricycle before use.

Placing the Batteries and Important Information

1. Ensure children are not present when placing batteries.
2. Batteries are not included.
3. Insert 2 x AA 1.5V batteries with the correct polarity as indicated.
4. Secure the battery compartment cover with the screw.
5. Batteries should only be handled by adults.
6. Remove discharged batteries for recycling and never mix old and new batteries.
7. Use alkaline batteries for optimal performance.
8. Remove batteries if the product will not be used for an extended period.
9. Do not dispose of batteries in fire or household waste.

FAQ

Q: Can the tricycle be used in rainy weather?

A: No, it is recommended not to use the tricycle in rainy or wet conditions to prevent damage or rust.

Q: What type of batteries should I use?

A: Use 2 x AA 1.5V alkaline batteries for optimal performance.

Q: How should I handle battery replacement?

A: Ensure children are not present, follow the polarity guidelines, and always replace all batteries with new ones.

COMPONENTS

WARNINGS AND RECOMMENDATIONS FOR SAFE USE

• IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!
• THE USER MANUAL CONTAINS IMPORTANT INFORMATION ON THE ASSEMBLY, CORRECT USE, AND MAINTENANCE OF THE PRODUCT.
• WARNING! THE SCHEMES AND FIGURES IN THIS INSTRUCTION ARE FOR ILLUSTRATIVE PURPOSES ONLY AND THE PRODUCT YOU HAVE BOUGHT MAY DIFFER FROM THEM.

1. This tricycle is intended for use by children above 3 years of age.
2. The maximum loading capacity of the product – child + luggage in the toy basket – must be up to 25 kg.
3. The overloading of the construction may lead to injury to the child.
4. The tricycle is not intended for carrying more than one child at the same time.
5. WARNING! To be used under the direct supervision of an adult!
6. Never leave the child alone on the tricycle!
7. WARNING! Protective equipment should be worn. Not to be used in traffic.
8. The safety belt must be worn when the product is used by children under 3 years of age. Make sure that the safety belt is placed correctly!
9. Adult assembly is required.
10. Do not unpack and do not assemble the product close to small children.
11. Warning! Content of small parts. Risk of choking and suffocation!
12. The packing materials are not a toy and are not part of the tricycle. Remove them before use! Throw the packaging at the designated places.
13. Children must not play with the packing of the product.
14. WARNING! Do not place and do not tie to the toy any objects or other accessories and strings that are not included with the product! The danger of hanging, entanglement, and disturbance in the balance. Risk of injury!
15. The correct assembly of the tricycle following carefully the manual is of great importance for the safety of your child!
16. Use only as intended!
17. Do not hang luggage on the paternal control handle. This may lead to disturbance of the balance of the product, upturning, and injury to your child!
18. To ensure safe use and avoid damage, do not make any changes, additions, or modifications to the tricycle’s construction. If necessary, contact the seller or an authorized repair shop for consultation or repairs.
19. WARNING! THE PARENTAL CONTROL HANDLE OF THE TRICYCLE MUST BE HANDLED BY AN ADULT ONLY. USE THE HANDLE FOR DIRECTING THE MOVEMENT, NOT FOR LIFTING OF THE TRICYCLE OR GOING DOWN OR UP THE STAIRS OR CURBS! THE WARRANTY WILL NOT BE VALID IF THE HANDLE IS BROKEN DUE TO THE FAULT OF THE USER!
20. Do not allow children to pull or push the toy.
21. The parental control handle must not be removed if you are not completely sure that the child can ride the tricycle independently and without the help of others!
22. Keep away from direct heat sources – open fires, heaters, or cookers.
23. Use the product on even ground and safe grounds!
24. The use of the tricycle is not allowed in the following areas:
    • on inclined surfaces;
    • close to stairs or pools;
    • behind stopped cars, on or close to roads and streets with traffic, rivers, hills, protrusions, escalators, and other dangerous places.
    • in muddy and swampy terrains.
25. To be used during the day only.
26. WARNING! The hands, feet, or other parts of the child’s body must be away from the wheels or other moving parts. Otherwise, the child may get injured.
27. To use the tricycle independently, the child must master special skills! Before it has started riding the tricycle independently, make sure that you have explained to it, how to step on the footboard, how to turn the pedals, and how to get on and off. If the child cannot do any of these actions on its own, use the parental control handle.
28. Do not allow the child to stand up on the seat.
29. Do not allow the child to ride the tricycle barefoot.
30. WARNING! The child must not hang its feet at the sides.
31. The parental control handle, canopy, belts, and safety board are suitable for use when the children cannot independently ride the tricycle. When the child can independently ride the tricycle, you can dismount these additions.
32. The toy is not suitable for running or skating.
33. Take care of the people and pets around you, while using the product.
34. Be careful to avoid collisions with other objects!
35. You must teach your child to always ride the tricycle only forwards, in the direction of movement, without turning back, while in motion.
36. The child must not jump with the tricycle from curbs or other higher parts, as well as bumping into them.
37. Do not use the tricycle on rainy days.
38. The use of the tricycle in rainy/ wet weather may lead to damage or rust to the product. Keep the product away from water.

PARTS OF THE TRICYCLE

Before assembly of the tricycle, take all the parts out of the packing and check if all of the bellow listed are present. Keep the packages until you finish the assembly. SEE FIGURE PD: a. Front wheel with front fork; b. Frame; c. Handlebar; d. Headlight; e. Rear wheels with axles and bushings; f. Rear brakes; g. Rear basket; h. Seat; i. Safety board; j. Canopy; k. Tube for the parent control handle; l. Parent control handle; m. Rod controlling the front wheel direction; n. Front basket; o. Bottle/ cup holder;

ASSEMBLY STEPS

1. Step 1 – See Figure 1: Thread the front fork with the front wheel into the frame opening. Be careful how the mudguard is oriented.
2. Step 2 – See Figures 2 and 3: Place the handlebar on top of the front fork. Align the holes on the handlebar with those on the front fork that are intended for the set screw. Insert the screw through these holes and secure it using a screwdriver and nut. Take the headlight and using a screwdriver, remove the screw from the battery cover. Insert 2 AA 1.5V size batteries correctly according to the polarity. Put the cover back and fix it with the screw and screwdriver. Attach the headlight to the handlebar holder designed for it.
3. Step 3 – See Figures 4, 5, and 6: Thread the axles into the corresponding holes in the rear tires and bushings. Attach the rear brakes to the tricycle frame. Insert the rear axles into the corresponding holes in the rear of the tricycle frame. Press forward gently. You should hear a clicking sound indicating that the rear tires have locked onto the frame.
4. Step 4 – See Figure 7: Place the rear basket in the rear of the frame and secure it using a screw.
5. Step 5 – See Figures 8, 9, and 10: Place the seat in the middle of the frame of the stand designed for it.
   • The seat screws must pass through the holes in the stand. Fix with nuts. Then install the protective board to the holders located on the seat. Attach the canopy to the backrest as shown in Figure 10.
6. Step 6 – See Figures 11 and 12: Insert the tube into the holder at the bottom of the rear frame. Attach the parental control handle to the tube. Press the red clamp on the handle and insert a screw into the hole. Fix it with a nut.
7. Step 7 – See Figures 13 and 14: Take the front wheel control rod and insert its front end into the holder attached to the front fork. Insert the rear end of the rod into the holder attached to the down tube. Fix the rear end using nuts.
8. Step 8 – See Figures 15 and 16: Attach the front basket to the front of the trike’s frame. Then attach the cup holder to the parental control handle.

PRODUCT FUNCTIONS

1. Seat: To rotate the seat so that the child is facing the parent, press the red button at the base of the seat and rotate it to face the parental control handle. Fold the handlebar forward, recline the backrest and pull out the footrests at the base of the seat.
2. Backrest: The backrest can be adjusted to several positions using the buttons located on the side of the seat. Press both buttons at the same time and place the backrest in the desired position. Release the buttons to lock the seat.
3. Folding Handlebar: Press the buttons at the base of the handlebar at the same time and lower the handlebar forward towards the front wheel.
4. Headlamp: There are 2 buttons on the headlamp – for music and lights.

PLACING THE BATTERIES AND IMPORTANT INFORMATION

WARNING! When placing the batteries, children should not be present!

1. The batteries are not included in the set.
2. After that place 2 x AA 1.5 V batteries in the compartment, make sure that you observe the respective polarity (+/-) when you place them, it is indicated on the scheme “BATTERY CHANGE“ and also at the bottom of the compartment.
3. Replace the cover of the battery compartment and secure it with the screw.
4. The batteries should be handled by an adult only. Do not allow the children to play with the batteries.
5. Always remove the discharged batteries and do not throw them away with the household waste, use the places designated for that purpose. They are recyclable.
6. Use АА batteries only.
7. Alkaline batteries are recommended.
8. Always remove the batteries, if you will not use the product for a long period.
9. When you replace the batteries always replace them with new ones, always replace all batteries. Children should not be present while you are replacing the batteries.
10. Do not mix old batteries with new ones.
11. Do not mix alkaline, standard (Carbon – Zinc), or rechargeable (Nickel – Cadmium) batteries.
12. Do not throw the batteries in fire, because they may blow up or leak.

CLEANING AND MAINTENANCE OF THE PRODUCT

1. Cleaning:
   • Clean with soft dry cloth. Do not use aggressive cleaning detergents – alcohol or bleach–based ones, or such, containing abrasive particles.
   • Do not spray water or other liquids directly on the tricycle during play or cleaning. This way you will avoid the risk of damage to the tricycle due to rush on the metal parts and disturbance in the stability of the connections.
   • Clean the tires regularly from sand or dust.
   • Keep the tricycle clean.
2. Maintenance and storage:
   • A. Before each use of the tricycle, check carefully the working order of all parts and connections:
   • The screws must be tightened well;
   • The wheels and handlebar must be strong and fixed stably;
   • The wheels must move freely.
   • B. You must not use the tricycle if you find that there are any loose, worn, or damaged parts.
   • C. The long use of the product may lead to loosening of the screws and nuts. Please, make sure that all nuts and screws are tightened well, to protect the child from injury.
   • D. Warning! DO NOT OVERTIGHTEN, to avoid breaking of the parts.
   • E. Exposing the product to direct sunlight may lead to discoloration or fading of the color.
   • F. Store the tricycle at a cool and dry place, when you are not using it.
   • G. Store the product away from direct sunlight and sources of heat – open fire, heaters, or cookers.
   • H. Check the product regularly before and after each use for malfunctions, cracks, broken or missing parts. Stop using it if you find any damage until it is removed.
   • For this purpose, contact the person you bought the product from, or the importer!

CE MARKING AND EO CONFORMITY

• The product complies with the general and specific requirements of the following harmonized standards: ЕN 71-1:2014+A1:2018; EN EN 71-2:2020; EN 71-3:2019+A1:2021.
• MADE FOR BYOX
• MANUFACTURER AND IMPORTER: MONI TRADE LTD,
• ADDRESS: BULGARIA, CITY OF SOFIA, TREBICH QUARTER, 1 DOLO STR., TEL.: +359 2/ 936 07 90 WEB:WWW.BYOX.EU; WWW.MONI.BG

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>