AIFFRO K100 Mini PC Installation Guide
- June 1, 2024
- AIFFRO
Table of Contents
AIFFRO K100 Mini PC
Aiffro K100
Installation Manual
Precautions
-
Before installation, ensure that your hands and work environment are free from static electricity. It is recommended to use an anti-static wristband or touch a metal object to discharge static electricity before installation.
-
Before starting the installation, make sure that the computer is completely shut down and disconnected from the power source.
-
Prepare the necessary tools and materials, such as a screwdriver and screws.
-
Ensure that the solid state drive you are installing supports the NVMe protocol.
This product does not support M.2 drives with the SATA protocol. -
When inserting the solid state drive, ensure that the connectors are fully inserted and secure. Gently push the connectors to ensure they align with the slots and are not loose.
-
Do not forcefully insert or bend the connectors to avoid damaging the device.
-
Properly install the bracket and use the appropriate screws to secure the solid state drive in place, but do not overtighten to avoid damaging the device.
-
Before installing the drive, it is recommended to test the newly installed solid state drive to ensure it is properly recognized and functioning correctly.
Installation Steps
-
Remove the foot pad at the bottom of the device.
Note: The foot pad has a snap structure and requires a tool for removal. -
After removing the foot pad, you will see screws underneath. Use a screwdriver to remove the screws.
-
After removing the screws, remove the bottom cover.
-
Unscrew the fixing screws of the solid state drive heat sink to remove the heat sink.
-
Install the solid state drive and fasten it with screws.
-
. Install the solid state drive heat shield and fasten it with screws. Install the bottom cover and tighten the screws to complete the installation of the solid state drive.