LIBEREX SF-5001 Pedi Smoothing Tool User Manual

LIBEREX SF-5001 Pedi Smoothing Tool

Product Information

• Product Name: Pedi Smoothing Tool
• Product Model: SF-5001
• Rated Input: 5V=1A
• Rated Power: 2W
• Charging Mode: USB
• Product Size: 192×35 mm
• Net Weight: 124 g
• Executive Standard: GB 4706.1-2005, GB 4706.9-2008

Product Usage Instructions

1. Ensure that the skin is perfectly clean and dry before using the Pedi Smoothing Tool.
2. Make sure the product has sufficient power and remove the protective roller cover before use.
3. Select the desired roller head and replace the roller head on the pedicure tool. Ensure the roller head is secure in the unit.
4. Push the On/Off switch upward on the back of the unit to turn it on.
5. Gently glide the roller back and forth, side to side over the hard skin. Do not press too hard to avoid causing irritation to the skin. Do not use in the same place for more than 3-4 seconds at a time.
6. After use, slide down the switch to turn off the unit.

Roller Heads Replacement

1. To replace the roller head, push down on the head of the unit and pull the top of the roller away from the unit.
2. To insert a different roller head, insert the downside of the roller into the handle end first, then insert the up part with the WHITE ROUND pin through the gap at the top.
3. Firmly snap the WHITE ROUND pin into place with the sound of a click. Make sure the roller head fits securely without falling out of the unit.

Maintenance and Cleaning

1. After each use, brush off any skin debris collected on the unit and roller head with the provided cleaning brush.
2. The roller head can be washed under running water.
3. Once dried, carefully place the protective cap on the roller head.
4. Do not place or rinse the whole unit under water as it is not waterproof.

Storage

Store the Pedi Smoothing Tool in a dry and safe place after use.

Warranty

We provide a 1-year guarantee on the product. The guarantee covers defects found due to faulty workmanship or material. Proof of purchase is required to validate the guarantee. The guarantee will be void if the damage has been caused by a fall, alteration, or repair by any unauthorized persons.

Thank you for purchasing the Liberex® Pedi Smoothing Tool. Enjoy smoother, softer and more attractive feet.
The 360° rotation follows just a flick of a switch, painless and easy-to-use. The unit targets the rough and callused areas of skin on the feet and transformed into buttery-soft morsels. An easy hold handle and vertical shape makes it even more flexible during the pedicure process. The coarse roller head is for removing the majority of dead, callused skin and a finer roller head for softening and smooth in the treatment.
Please read these instructions carefully before use. This appliance should
only be used as described within this instruction booklet. Please retain for reference.

CAUTION:

• Close supervision is necessary when this appliance is used by, on, or near children or disabled persons. This appliance should not be used, cleaned ormaintained by children.
• The Pedi Tool is only for use on the feet and heels. Do not use anywhere else on the body. Do not use on open wounds, cuts, burns, warts or blisters.
• Unplug the appliance from the electrical outlet immediately after charging and before cleaning.
• DO NOT operate this appliance if it has a damaged cord if it is not working properly if it has been dropped or damaged, or dropped into water.
• DO NOT immerse in water or any other liquid. Do not use while bathing or showering.

What’s Included

• 1 * Pedi Tool
• 1 * Coarse roller head
• 1 * Fine roller head
• 1 Clear protective cover 1 Cleaning brush
• 1 * USB Charger

Charging

Please fully charge before using this product for the first time.

1. Insert the small plug of the charging cable into the charging socket at the bottom of the product (Fig.1), and the USB can be connected with adapter, power bank, computer, etc.
2. The indicator light is always on when charging (Fig. 2) and off if fully charged.
3. A full charge will take about 1 hour and will run for approximately 1 hour.

Roller Heads Replacement

Before replacing the roller head, make sure that the power supply is disconnected and the machine is turned off.

1. Push down on the head of the unit (Fig. 3) and pull the top of the roller away from the unit (Fig. 4).
2. To insert a different roller head back, insert the downside of the roller into the handle end first, the up part with WHITE ROUND pin can then be inserted through the gap at the top(Fig. 5).
3. Firmly snap the WHITE ROUND pin firmly into place with the sound of “click”. Make sure the roller head fit securely without falling out of the unit.

Instruction for Use

1. Preparation of the skin: Prior to use, ensure the skin is perfectly clean and dry.
2. Ensure that the product has sufficient power and remove the protective roller cover hetore lice
3. Select the desired roller head and replace the roller head on the pedicure tool (Fig. 4). Ensure the roller head is secure in the unto
4. Push the On/Off switch upward on the back of the unit(Fig, 6).
5. Gently glide the roller, back and forth, side to side over the hard skin(Fig. 7).
6. Do not press too hard to avoid causing irritation to the skin. Do not use in the same place for more than 3-4 seconds dug time
7. During use, you can turn off the unit to check if you have achieved the required softness you desire. If not, repeat the gliding action over the skin.
8. After use, slid down the switch to turn off the unit (Fig. 8).

Maintenance

To Clean

Please clean the product after each use to keep it clean and in a high- performance state. The Liberex pedi tool is not waterproof. Do Not place or rinse the whole unit under water.

1. After use, brush off any skin debris collected on the unit and roller head with the cleaning brush provided(Fig. 9).
2. The roller head can be washed under running water (Fig. 10).
3. Once dried, carefully place the protective cap on.

To Store

• Unplug the appliance from the outlet and allow it to cool before storing it in its box, or a clean, dry place.
• Please place the product properly to prevent children from reaching the product.
• Do not place under direct sunlight or at high temperatures or high pressure to avoid damage to the product.

Specification

• Product name: Pedi Smoothing Tool
• Product model: SF-5001
• Rated input: 5V=1A
• Rated power: 2W
• Charging mode: USB
• Product size: 192×35 mm
• Net weight: 124 g
• Executive GB 4706.1-2005,
• standard: GB 4706.9-2008

Note : in view of the consistent policy of continuous improvement of products, the company reserves the right to change the product specifications, and the physical goods shall be subject to shipment.

We provide 1 year guarantee on the product. It will cover defects found due to faulty workmanship or material. Proof of purchase is required to validate the guarantee. The guarantee will be void if the damage has been caused by a fall, alteration or repair by any unauthorized persons.

Email: support@liberex.com
www.liberex.com

Documents / Resources

| LIBEREX SF-5001 Pedi Smoothing Tool [pdf] User Manual
SF-5001, SF-5001 Pedi Smoothing Tool, Pedi Smoothing Tool, Smoothing Tool, Tool
---|---

References

• Liberex®| Professional Personal Care Products – LIBEREX

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>