Shenzhen Shengdaren Technology Co Ltd 2A8TA-I63 Wireless Earphones User Manual

Shenzhen Shengdaren Technology Co Ltd 2A8TA-I63 Wireless Earphones

Product Information

Specifications

• Model: I63 True Wireless Stereo Earphones
• Wireless Chip: Imported Wireless 5.3 chips
• Compatibility: Bluetooth-enabled mobile phones (iOS/Android/Windows Phone), tablet PCs, smart watches, notebooks, desktop computers
• Accessories: 2 x Wireless Earbuds, 1 x USB Cable, 1 x Charging Case, 1 x User Manual, 3 x Pairs of Ear Tips (L/M/S)

Frequently Asked Questions

• Q: How can I activate the warranty for the product?
  • A: To activate the warranty for permanent replacement of damaged, defective, upgraded, or lost items, send an email to [email protected] within 15 days of purchase.
• Q: Is this product safe in terms of radiation exposure?
  • A: Yes, the device has been evaluated to meet general RF exposure requirements and can be used without restrictions in portable exposure conditions.

Compatibility

This product is compatible with all Bluetooth-enabled mobile phones (iOS/Android/Windows Phone),tablet PCs, smart watches, notebooks and desktop computers.

Package Accessories

• 2* Bluetooth Earbuds
• 1 * Charging Case
• 1 * USB Cable
• 1 * User Manual
• 3 * Pairs of Ear Tips

Noted

• Regular cleaning with a cotton swab is recommended, as shown in the image above.
• When the earbuds are not charging, you can use a cotton swab dipped in alcohol to gently wipe the bullet needle and copper column.

Product Details

• 1. Charging case digital display
• 2.9 Earphone digital display
• 3.8 Earphone charging port
• 4. 7 Touch Button
• 5. 6 Earphone indicator

Usage

In order to get the best audio experience, please wear the left and right earphones correctly, and you will feel close, comfortable and stable in your ears after wearing them correctly. And please put your cellphones in the same side of left earphone during outdoor.

Powering ON

• Method 1: The charging box is equipped with a Hall switch.Open the charging box and the earphones will “power on”.
• Method 2: When the earphones are OFF,Keep the touch button of both earphones for 3-5seconds.The Led light flashes once and with a sound prompt:“power on”.

Powering OFF:

• Method 1: The earphones will switch off when put into the charger case.
• Method 2: Keep the earphones touch button pressed for 3-5 until the Blue LED flashes with a sound prompt: “power off”.

Note: If the earphones were disconnect with the device, the earphones will be power off automatically after 5mins.

Stereo Mode

1. When the charging box is opened, the earphones will automatically turn on. After a few seconds, the left and right earbuds will auto connect each other.When the earbuds are connected to each other, the LED light will flash quickly.If they connect successfully, the earbuds LED light will flash slowly.
2. Open the bluetooth devices page inside settings.Search for “I6 3” and select it to pair,the Earphone lights be off after the earphones connected with device.

Note

• If the earphones connected the device once, and the bluetooth functions of device was open ,the earphones will be reconnected with last device automatically.

Reset Mode:

• In the power-on state, after 5 quick clicks L/R, the earphones is turned off (the blue light is off), and the pairing information between the earphones and the mobile phone is cleared after restarting.

Play Music:

1. Touch the button once to Pause/Play.
2. Keep press the touch button for 1 seconds and release it （“L”for previous song, “R” for next song)
3. Touch the button twice to adjust the volume(“L”for decreasing ,”R” for increasing)

Voice Assistant

• Touch the button three times to activate the Siri voice assistant

Calling

1. When a call comes in, short press one of the touch buttons in order to answer the call or long press it to reject it.
2. During a phone call, short press the earphone button to end the call and the earphone will resume its previous working state.
3. During a call, the volume can be controlled via the mobile phone.
4. Stereo mode: both ears have voice.

Specifications

• Model: 163
• Bluetooth version: V5.3
• Voltage rating and energy capacity: 3.7V/400mAh
• Battery capacity: 2*3.7V/40mAh
• Earphone Charge time: Around 1.5 hour
• Music playing time: About 8h
• Bluetooth profiles supported: HFP/A2DP/AVRCP
• Operating frequency: 2.40 GHZ-2.48 GHZ
• RF Sensitivity: -92dBm
• Working temperature range: – 10+50 C
• Maximum transmission range: ≤15M

Packing List

• Earphones *2
• USB cable *1
• Charging case *1
• Earcaps *4(L/ S)
• User manual +1

Important:

1. Host device is a connection between second device and your mobile phone,it is normal status under high power consumption.
2. When not connected to any device,the earphones will power off automatically afer 5 minutes.
3. On iPhones the battery level of the earphones will be displayed in real time.
4. When the earphones and the charger case are not used for long periods of time, it is recommended to keep them in a dry place and to recharge them at least every 2 months.

Fault

earphones touch button pressed for 8 seconds
No charging indication| The Earbuds are not well put into/ There are foreign objects in the spring needle and copper column| Adjust Earbuds position/ Clean the spring needle and copper column
Automatically shut down| Earbuds are low battery| charge the Earbuds
The Earbuds have

an echo

| The volume is too high or the environment is too noisy| Adjust the volume or change position
The Earbuds are noisy| Outside  environment interference or too far away from mobile phone| Change position,or move closer to the mobile phone
Small sound| wearing Earbuds incorrectly or the volume is too low| Adjust the Earbuds position or the mobile phone volume
Signal intermittent| Outside environment interference or too far away from mobile phone| Change to better environment or move closer to the mobile phone
Earbuds have no sound| Pairing unsuccessful between L and R Earbuds| Put the earphones into the charger case

ACTIVATE WARRANTY

• Support permanent replacement for damaged, defective, upgraded or lost item(No need to return the original one). Please activate within 15 days via below e-mail.
• [email protected]

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

ISED Canada Statement:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure

• This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

IC Radiation Exposure Statement

• The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC: 29370-I63
FCC ID: 2A8TA-I63
HVIN: I63

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>