Showa Mirai LLC M001 Mist Instructions
- June 1, 2024
- Showa Mirai LLC
Table of Contents
Showa Mirai LLC M001 Mist
Specifications:
- Size: 80 x 80mm
Product Information
Mist is a precision device designed to work with the Apple Find My network. It helps users locate their items by connecting to their Apple devices via Bluetooth.
Product Usage Instructions
Installing the Battery
- Press down and twist the battery cover counterclockwise until it stops rotating.
- Remove the back cover.
- Take out the battery.
Adding Mist to Apple Find My
Add Mist with factory setting state:
- Update your iOS or iPadOS to the latest version.
- Turn on Bluetooth on your phone and pull out the mylar from Mist.
- Open the Apple Find My app, tap +, then Add Other Item, search for Mist, and follow the onscreen instructions.
Add Mist in another state:
- If Mist is not added to the Apple ID after ten minutes, reset it by powering off/on the battery five times until you hear a different power-on sound.
- To pair Mist with another Apple ID, remove it from Find My and then follow the instructions in 2.1 to add it again.
Finding Items with Mist:
- Play sound function: Use the Find My app to play a sound on Mist when it’s within range of your Apple device.
- Locating Mist : Track the location of Mist on your Apple device’s map to find it.
- Lost Mode : Enable Lost Mode to make finding your items easier.
Maintenance Tips:
- Avoid exposing Mist to heat or fire sources to prevent damage.
- Dispose of Mist according to local waste disposal regulations.
FAQ
- Q: How can I reset Mist if it’s not connecting to my Apple ID?
- A: To reset Mist, power off/on the battery five times until you hear a different power-on sound. Then follow the adding instructions again.
- Q: Can Mist be paired with multiple Apple IDs?
- A: Yes, you can pair Mist with different Apple IDs by removing it from Find My and adding it again following the instructions provided.
Instructions
Remove and install the battery
- Step 1: Press down and twisting the battery cover counterclockwise until the cover stops rotating.
- Step2: Remove the back cover.
- Step3: Remove the battery
Add Mist to Apple Find My
Add Mist with factory setting state
- Update to the latest version of iOS or iPadOS. Turn on Bluetooth of your phone, then pull the mylar out of Mist.
- Open the Apple Find My app, tap +, then tap Add Other Item , search for Mist, and follow the onscreen instructions.
Add Mist in another state
Resetting
If Mist is not added to the Apple ID after ten minutes, Bluetooth will stop transmitting to save power. You need to power off/on the battery five times to reset it again. Reset is successful if hear a different power-on sound. Then you can start adding to Find My again. The method is the same as 2.1.
If order to pair Mist with another Apple ID, first remove it from Find My by
tapping on the Items tab, tapping the name on the Mist item, scrolling down to the bottom of the detail card, and then tapping Remove Item. It can then be added again by following the instructions in 2.1.
Operation Instructions
Find items at close range- Play sound function for the paired Mist, within the short range of the owner’s Apple device, you can click “Play Sound” in the Find My app, or say “Hey Siri, Find my wallet” to play sound, and the device will play sound to indicate the location. If it’s hiding nearby, such as under a cupboard or in the next room, you can easily follow the sound to find it.
Mist is away from the owner
The owner can see the location of the lost Mist on Apple device, and navigate bythe map to find Mist and items.
Lost Mode- Find things easier
Mist can be set as Lost mode. Open the “Find My” app, select and added “Mist”, click on the “Lost mode”, follow the instructions of the app, enter the phone number, then the setting is successful. In Lost Mode, You’ll automatically get a notification when it’s detected by other devices in the Find My network. So if others pick up your Bluehive Item Finder, they can know how to contact you by following the learn more instructions in the Find My app. People nearby also can identify this lost Mist, and get the contact info if you have set in lost mode, and send a message to the owner, help the owner find the lost items.
Find Items with help from hundreds of millions of friends
Find My Network will help you find your belongings when they are left behind,
Bluehive Item Finder will send out a secure Bluetooth signal that can be
detected by nearby iOS devices in Find My Network, these devices send the
location of your Mist device to iCloud, then
you can go to the Find My app and see it on the map. The whole process is
anonymous and encrypted to protect your privacy. And it’s effcient, so there is
no need to worry about the battery life and data usage.
Prevent unwanted tracking
To prevent unwanted tracking, when someone else’s Mist is seen traveling with you for a period of time, your iOS device will find it and send you an alert notification. If you haven’t found this device after a while, it will play a sound so you can find it. But don’t worry, if someone next to you has a Mist device, as long as the device is near it’s owner, you will not receive a notification.
Privacy Protection
Only you can see where your Mist is. No location data or location history is physically stored inside Mist. Communication with the Find My network is end- to-end encrypted so that only the owner of a device has access to its location data, and no one including Apple knows the identity or location of any device that helped find it.
Warm Tips
- Mist is a precision device. Don’t discard it, and don’t let it be overly affected.
- Keep away from all heat and fire sources, such as heating equipment, heaters, ovens, flames and exposure to sunlight.
- Do not repair or disassemble the equipment by yourself.
- Avoid use or storage in high humidity or temperatures above 60℃, otherwise, it may cause failure.
- Dispose of products in accordance with local government regulations on waste disposal.
To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires the latest version of watchOS.
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
FCC Warning statement：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.