Orbegozo SF-0246 Stand Fan Instruction Manual

STAND FAN – INSTRUCTION MANUAL

SF-0246 Stand Fan

SF 0246

Read this manual carefully before running this appliance and save it for reference in order to obtain the best results and ensure safe use.

SAFETY INSTRUCTION

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning  use of the appliance in a safe way and understand the hazards involved. Children must never play with the appliance. Cleaning and user maintenance must never be carried out by children without supervision.
2. Children should be supervised to ensure that they do not play with the appliance.
3. Keep the appliance and the cable cord out of the reach of children less than 8 years old.
4. WARNING: In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
5. If the supply cord is damaged it must be repaired by the Authorized Service Agent.
6. Never pull on the cord when unplugging.
7. Do not use the unit with a damaged cord or plug, or if it is not working properly.
8. Do not handle the appliance with wet hands.
9. Never immerse the appliance in water or any other liquid.
10. Make sure the appliance has been unplugged before cleaning.
11. This appliance must be installed following the national regulations for electrical installations.
12. This appliance is for household use only.
13. In case that you need a copy of the instruction manual, you can find it in www.orbegozo.com.
14. WARNING: In case of misuse, there is a risk of possible injury.
    • Make sure to keep the fan far away from humidity, chemical articles and oil.
    • Use fan only for intended use as described in instruction manual
    • Do not hang or mount fan on a wall or ceiling.
    • While cleaning, be sure to not splash water and do not use oil, alcohol or chemical articles as they may cause distortion of fan body and cause electrical hazards.
    • Keep away from curtain, clothing or other something may affect the fan’s working.
    • Never use the fan before finishing assembly to avoid any hurts.
    • Never insert fingers, pencils or any other object through the grille when fan is running.
    • Disconnect the plug when moving from one location to another.
    • Be sure fan is on a stable, even surface when operating to avoid overturning.
    • DO NOT USE fan in window. Rain may create an electrical hazard. Do not leave the fan operating adjacent to an area where water has been collected to avoid the potential of electrical hazard.

DESCRIPTION

1. Front grill
2a. Front grill ring
2b. Rear grill ring
3. Blade’s nut
4. Blade
5. Plastic nut for motor
6. Rear grill
7. Motor and motor shaft
8. Fan’s body
9. Control panel
10. Fixing screw
11. Cord and plug| 12. Extensible tube
13. Height adjustment nut
14. Lower tube
15. Inner base
16. Outer base
17. Base support (Table fan)
18. Remote control
19. Wall fan support
20. Snapping lock pin
21. Lock screw
22. Wall hook
---|---

ASSEMBLY INSTRUCTIONS

For stand fan

1. Remove parts from packaging. Place the outer base (16) on the floor, set the inner base (15) on the outer base and align the slots to fit them. Insert lower tube (14) in the hole of base and screw it tightly.
2. Loosen the height adjustment nut (13) and pull up extensible tube (12) until desire height, tighten the nut to set desire height.
3. Place the fan’s body (8) in the extensible tube and tighten the fixing screw (10) to be fit in that position.

For table fan

1. Place inner base and outer base (15 y 16) on a table, screw the base support (17) in the base.
2. Place the fan’s body (8) on the support (17) and tighten the screw (10).

For wall fan

1. Place the wall hook (22) on desire position, mark with a pen the holes for screws and make a drill. Place the stopper in the Wall and screw the hook with the screws.
2.  Place fan’s body (8) in the wall support (19) and fit it with the screw (10). Fit the wall support on wall hook.

ASSEMBLY OF BLADE AND GRILLS

1. Remove plastic sleeve of motor, grills and blade. Place rear grill (6) on the motor frontal through motor shaft (7). Ensure the handle at the rear grill is facing up and that all guiding pegs on the motor housing are lined up with cutouts on the rear grills.
2. Secure the rear grill into the place with the plastic nut (5). Fasten the plastic nut firmly onto the motor housing by tightening it in a clockwise direction.
3. Install the fan blade (4) onto motor shaft (7) with the cutouts fitted. Place blade’s nut (3) on the motor shaft after the blade. Fasten it by tightening in a counter clockwise direction.
4. Fit front grill (1) with front grill ring (2ª) against rear grill ring (2b) by aligning the alignment mark on the top of the grill ring, closing them together by the hooks on front grill ring and slots on the rear grill ring, twisting the front  grill clockwise to the lock position, the snapping lock pin (20) should pop in. Tighten the lock screw (21) to secure the snapping lock pin.

OPERATING INSTRUCTIONS

Using the control panel and remote control
This fan is equipped with 3 speeds, 3 fan modes, timer and remote control. For your convenience, the buttons on control panel and remote control are the same.

Timer. Each time you press this button, the timer increase 30 minutes from minimum 30 minutes to maximum 7.5 hours. After the time runs out, the fan will automatically shut off. Control panel shows 4 lights (0.5h, 1h, 2h, 4h) some of  them twilight and the time of timer will be their sum. Examples: 0.5h lights, 30 min of timer. 0.5h and 2h light, 2h and 30 min of timer.

Mode. Each time you press this button will set a mode. Normal, there is no light on control panel, normal fan mode. Nature, will light and the fan speed will change by cycling through all speeds (low, mid and high). Sleep, it will  light on control panel and the fan speed will change by cycling low speed and high speed.
Speed. This button set the speed: low – , middle and high
Oscillation. To activate the oscillation function press this button, to deactivate it, press it again.
ON/OFF. Press this button to turn on or turn off the fan.

SPECIFICATIONS

CLEANING AND MAINTENANCE

1. Always disconnect the cord from electrical outlet when cleaning your fan.
2. You can clean the accumulated dust in rear grill with a soft cloth.
3. Wipe the other parts of fan and blade occasionally with a damp cloth and dry thoroughly with soft dry cloth before operating the fan.
4. Do not use harsh cleaners, doing so will cause damages to it.

STORAGE

1. Before store your fan, clean it following cleaning instructions and disassemble it.
2. To conserve it better, store the fan in the original packaging.
3.  Always store it in a dry place.
4. Never store it while still plugged in.
5. Never wrap cord tightly around the fan body, it could break.

DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must  be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your  obligation, that when you dispose of the appliance, it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

DECLARATION OF CONFORMITY:

This device complies with the requirements of the Low Voltage Directive 2014/35/EU and the requirements of the EMC directive 2014/30/EU.

GUARANTEE

This appliance is covered and is entitled to the legal guarantee in accordance with the legislation in force from the date of purchase. Keep the purchase receipt to be able to claim your right to the guarantee. To find the closest service to your location, contact through the following web link: https://orbegozo.com/asistencia-tecnica/
For any type of query, doubt or incident, you can contact us through our email shown on the main page of this manual or through our technical assistance service at https://orbegozo.com/contacto/
Orbegozo is not responsible for components and accessories that are subject to wear and tear due to use, as well as perishable compounds or those that have deteriorated due to improper use. Nor will it be held responsible if the owner has technically modified the device. (Check the legal conditions on our website).

ERP TECHNICAL SPECIFICATION
REGULATION (EU) 206/2012 AND (EU) 2016/2282
DIRECTIVE 2009/125/EC

Description| Symbol| Value| Unit
Maximum fan flow rate| F| 40.| 3
M /min
Fan power input| P| 53.| W
Service value| SV| 0.75| 3
(M /min)/W
Standby power consumption| PSB| 0.476| W
Fan sound power level| LWA| 62.| dB (A)
Maximum air velocity| C| 4.| meters/sec
Measurement standard for service value| IEC 60879:1986 (corr.1992)
Contact details for obtaining more information| Conifer S.A. Avda Santiago 86, 30007, Murcia, Spain.

Conifer, S.A.
Avenida de Santiago, 86
30007 Murcia
Espino
sonifer@sonifer.es
www.orbegozo.com
Made in P.R.C.

Documents / Resources

| Orbegozo SF-0246 Stand Fan [pdf] Instruction Manual
SF-0246 Stand Fan, SF-0246, Stand Fan, Fan
---|---

References

• Orbegozo Electrodomésticos | Todo para tu hogar y cocina
• Asistencia técnica - Orbegozo Electrodomésticos
• Orbegozo Electrodomésticos | Todo para tu hogar y cocina
• Contacto - Orbegozo Electrodomésticos

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>