DZHERELO 2E-PPS06056 Portable Power Station User Guide

DZHERELO 2E-PPS06056 Portable Power Station

Technical Specifications

• Battery Type and Capacity: Grade A LiFePO4 560Wh/25000mAh/22.4V
• Cycle Life: 2000 times
• AC Input : 220-240V, 50Hz (500W Max)
• MPPT Input: 10-50V 12A (240W Max)
• USB Type-C Output: 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 5A (100W Max)
• USB Type-C Output: 5V 3A, 9V 3A, 12V 2.5A, 15V 2A, 20V 1.5A (30W Max)
• 2x USB-A Output : 5V 3A, 9V 2A, 12V 1.5A (18W Max)
• 2x DC5521 Output: 12V 10A (120W Max)
• Car Port Output: 12V 10A (120W Max)
• AC Output: 210-230V, 50 Hz, 600W Max (1000W Peak Max)
• Output Waveform: Pure Sine Wave
• Dimensions: 254 x 200 x 182 mm
• Weight: 6.5 kg

Product Usage Instructions

Precautions for Use:

1. Read all safety warnings and follow precautions.
2. Fully charge the device before first use.
3. Supervise children when using the product.
4. Charge the product at least every three months.
5. Avoid extreme temperatures affecting battery capacity.

Safety Warnings:

• Use only recommended accessories.
• Avoid using damaged wires or plugs.
• Ensure proper ventilation of the product.
• Do not disassemble the product.
• Avoid exposure to water or humid environments.
• Avoid high-temperature storage environments.
• Use dry powder fire extinguishers in case of fire.
• Avoid dust or foreign objects entering the device.

Button Functions:

• Power Button:
  • Long press (1.5 seconds): Power on, USB ports turn on automatically.
  • Short press: Turn on/off the AC output with a buzzer sound.
  • Long press: Turn on/off the buzzer with a sound alert.
  • Long press: Turn off the front lighting with a sound alert.

Frequently Asked Questions (FAQ)

• How often should I charge the product?
  It is recommended to charge the product at least every three months to preserve the battery life.

• Can I use damaged wires with this product?
  No, it is advised not to use damaged wires or plugs with the product to prevent any risks of electric shock or equipment damage.

• What should I do in case of fire?
  In case of fire, use dry powder fire extinguishers specifically designed for electrical fires. Do not use water fire extinguishers as they may cause electric shock.

About

Thank you very much for purchasing our multifunctional portable mobile energy storage system. It has a variety of ports such as USB, TYPE-C, DC5521, cigarette lighter, etc. Itis also equipped with 3W LED lighting and a display that can display the battery status and power. Suitable for a variety of different devices and scenarios, such as electric fans, televisions, drones, mobile phones, tablets, laptops, desktop, computers, small printers, various lamps, small fish tanks, photographic equipment, etc.
Please read this user manual carefully before using this product and keep it for future reference.

Technical Specifications

Battery type and Capacity:| Grade A LiFePO4 560Wh/ 25000mAh / 22.4V Cycle life: ³2000 times
---|---
Input| AC Input: 220-240V, 50Hz (500W Max); MPPT Input: 10-50V 12A (240W Max);

USB Output

| 1x USB Type-C: 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 5A (100W Max)
1x USB Type-C: 5V 3A, 9V 3A, 12V 2.5A, 15V 2A, 20V 1.5A (30W Max)
2x USB-A: 5V 3A, 9V 2A, 12V 1.5A (18W Max)
DC Output:| 2x DC5521 output: 12V 10A (120W Max)
Car Port Output:| 12V 10A (120W Max)

AC Output

| 210-230V, 50 Hz, 600 W Max (1000W Peak Max)
Output Waveform: Pure Sine Wave
Operation Temperature| -10°C~45°C
Dimension| 254 x 200 x 182 mm
Weight About| 6.5 kg

Package contents:ical

• 1x Portable Power Station
• 1x AC Charging Cable
• 1x Cigarette lighter to XT60 Adapter
• 1x Cigarette lighter to DC5521 Adapter
• 1x User guideal Specifications

Identification of parts

Front view

Side view

Rear

Display

Precautions for use

1. Please read all the safety warnings before use and always follow the basic precautions when using this product. Warranty does not cover damages caused by failure to follow instructions.
2. When using the device for the first time, it is recommended to fully charge it in order to avoid inconveniences during use due to lack of power.
3. Close supervision is required when using this product around children to reduce the risk.
4. Charge the product at least every three months to preserve the battery life.
5. Low temperature may affect the battery capacity of the product, the product can be charged in the temperature range of 0 to 40°C, and used in the temperature range of -10 to 45°C.
6. Place, charge and store the product in a well-ventilated place.
7. Wipe the product clean with a dry cloth.
8. When the product is not in use, unplug the power cord from the product outlet.

Safety warning

1. Use of accessories recommended or sold by non-professional product manufacturers may result in electric shock or equipment damage.
2. Do not use damaged wires or plugs or damaged output cables with this product.
3. Never restrict the ventilation of the product.
4. Do not disassemble the product. Doing so may result in unpredictable risks such as fire, explosion, or electric shock.
5. Avoid exposing the product to rain or using the product in humid environment.
6. Do not use or store the product in a high temperature environment (direct hot sunlight or hot car interior), otherwise the internal battery may overheat, catch fire or fail, shorten its lifespan, and incur other risks.
7. In case of fire, use dry powder fire extinguishers for this product. Do not use water fire extinguisher, which may cause electric shock.
8. Avoid getting dust or foreign objects inside the device, otherwise it may easily cause damage to its internal components.

Button functions

automatically.

AC

|

Power on

| Short press: turn on/off the AC output. The buzzer will sound.

Long press: turn on/off the buzzer (the buzzer is on by default). The buzzer will sound.

DC| Power on| Long press: turn off the front lighting. The buzzer will sound.

LED

|

Power on

| Short press: Turn on the light (brightness 1-2-3)> Strobe > SOS > Turn off the light

Long press: turn off the light. The buzzer will sound. Auto turn off the light: after 2 hours without pressing any button.

Power + LED| Power on| Long press (3 seconds): system reset
Power + AC| Power on| Power Long press + AC Short press: switch the AC output voltage. Voltage display flashes.
AC| Power on| Long press: turn on/off the buzzer
AC + LED| Power on| Long press: view the system software version

Other function

|

/

| 1.  Auto turn off the backlight: no operations for 2 minutes.

2.  Auto turn off DC and AC output: small/no current for 4 hours.

3.  Auto standby: 3 minutes without load.

Note. When the screen backlight is off, first press any button to turn on the backlight, and then activate the function with the corresponding button.

System fault code

Er 10

| BAT OCP: The battery is over-current (65 A).Turn off part of the output, otherwise the system will intervene.
Er 11| BAT UVP : Battery undervoltage warning
Er 12| BAT LOW : Battery low voltage warning
Er 14| BMS: Communication error

Using the Power Station

1. Press and hold the OFF/ON button for 1.5 seconds to turn on the station. Press and hold the OFF/ON button for 1.5 seconds to turn off the device.
2. When all outputs are off, the station will automatically turn off if no operation is performed for 3 minutes.

Powering DC appliances

• Turn on the power switch, press the DC/Car Charger Output ON/OFF button, the DC socket and the car charger will start to work and output 12V. Connect the electrical appliance to the desired power interface.

• Use the cigarette lighter socket to supply power for DC 12V electrical appliances, such as: vacuum cleaners, air pumps, electric wrenches, car refrigerators, etc. (Power<120W) 5521 interface DC 12V electrical appliance, such as: DC fans, LED lights, etc. (Power<120W)

Protection Mode:

• Short circuit/over power protection: If the DC output has a short circuit or the output is overpowered (load > 120W), the device will turn off the DC output for protection. After troubleshooting, turn the DC output back on to power the device.
• The DC output voltage range of this device is 11.4V-12.6V, and the maximum output current is 10A.

Powering AC appliances
Turn on the power switch, connect the device’s power plug to the portable power station’s AC port, then press the AC button and the device will supply power to the device.
Warning. Different countries have different interface specifications and voltage standards. Before use, be sure to carefully check whether the output characteristics of the product match the input characteristics of the electrical appliance, otherwise it may cause damage to the device.

(When the AC outlet is not in use, turn off the AC switch in time to save power.)
Protection Mode:
Short Circuit/Over Power Protection: If the AC output is shorted or the load power exceeds 600W or peak load exceeds 1000 W, the device will turn off the AC output for protection. Once the problem is corrected, turn on the AC output to supply power to the device.

Powering USB digital devices
Turn on the power switch, connect the USB cable of the digital device to the USB interface of this product. If the power does not start, plug and unplug the USB cable again.

Charging the product

• Cold Weather
  Cold weather can influence battery capacity. In sub-zero temperature (<0°C), you may be able to discharge the product, but you should not charge it. Otherwise, the battery of the product would be greatly damaged and the capacity may not even be recovered.
  Attention: The operating environment should meet all requirements in this manual. Make sure that the air inlet/outlet is not blocked

• Charging with AC power cord
  Connect the product to a household AC outlet using the AC power cord. If the battery indicator icon on the product display blinks, the product is charging. The charge level is indicated on the LCD display. When it reaches 100%, the product is fully charged. Remove the AC power cord from the AC outlet in time.
  Note. This product supports 500W maximum input power.

• Charging with a solar panel

1. Place the solar panel in a place with strong direct sunlight.
2. Connect the output of the solar panel to the charging input of this product. If the battery indicator icon on the product display blinks, the product is charging. The charge level is indicated on the LCD display. When it reaches 100%, the product is fully charged.

MPPT technology:
This product supports solar panel charging using MPPT technology. With its MPPT controller, this product can monitor the output voltage and current changes from the solar panel and get the best charging performance.
Actual performance may vary depending on climate, temperature, battery condition and other factors.

Charging with car 12V cigarette lighter socket
Use the included charging cable to plug it into your car’s 12V cigarette lighter socket. If the battery indicator icon on the product display blinks, the product is charging. The charge level is indicated on the LCD display. When it reaches 100%, the product is fully charged.

UPS function
This product supports UPS function. When you connect a computer to the AC input port of this product, it may use AC power from mains instead of battery power to operate. If there is a sudden power failure, this product can automatically switch to battery power mode within 20ms.

Application scenario

Outdoor
Car equipment: car fridge, car vacuum cleaner, pump and another car equipment; Camping equipment: garden electric tools, LED lights, etc.

Indoor
Laptops, phones, WiFi Routers, lighting, etc.

Examples of loads

1. Most electrical appliances in the market apply to the specifications of 12V/30A (XT60 or SPC45), 12V/10A, cigarette lighter, USB-A, and USB-C output ports of charger. But still, the charging of some products may activate the over-current protection if it generates an instantaneous high current at the moment of starting.
2. Charger can power electrical products with 600W or less rated power. Though the figure is under 600W, overload protection will still be activated when the appliance generates a massive instantaneous start-up power. Therefore, it’s recommended to apply charger to electrical products with lower-rated power.
3. If an output over-current, overload, or short circuit occurs, device will turn off the corresponding output port. Then it will automatically start again at an interval of 15s). If the output repeatedly stops, turn the equipment off. Please get in touch with the seller or maintenance group first for professional help.
4. When the battery level drops to 0%, the DC and AC output will automatically turn off. Please check the battery level before using device to protect and enhance battery cycle life.
5. This device supports charging and discharging simultaneously, and please keep the equipment laid flat during use, charging, and discharging.

Estimation of operating time

• Smartphone 38-41 Times 10W
• Television Around 5-5,5 hrs 75W
• Notebook Around 6-7hrs 60W
• LED Light Bulb Around 78-82hrs 5W
• Electronic Tools Around 4-4,5hrs 90W
• Wi-Fi Router Around 38-41hrs 10W
  560 Wh х DOD х × η ÷ (потужність навантаження) = час заряджання

Elimination of the most common problems during use

External device is not charging

|

1. The device is not properly connected to the charger.

| Make sure the product is properly connected to the charger. Check for poor contact in the connections.

2. The contact is good, but the charging indicator is not on.

| Turn on the output port button. If there is still no result, the charger might be broken, please contact after-sales service.
3. The charging indicator is on, device is still not charging.| The device might be broken, please contact device after-sales service.

Charger does not output power

|

1. The equipment is not properly connected to the charger.

| Make sure the equipment is properly connected to the charger. Check for poor contact in the connections.
2. The output port switch is not turned on.| Press the output port button.
3. Low output power.| Charge the charger.

4. Still no output power after eliminating 1.2.3 points.

|

The charger might be broken, please contact after-sales service.

Charger interrupts power output

| 1. The rated power or instantaneous starting power of the equipment used is greater than the power of the product.|

Select higher power energy storage.

2. The alarm symbol appears on the display screen. A beep sounds and the product automatically

turns off the output.

|

A short circuit has occurred in the equipment. Please check the wires and connections.

3. Power output still interrupts after eliminating 1.2.points.

| The charger or your device might be broken, please contact after-sales service.

FAQ

• Can this product be carried on a plane?
  No, because this product contains high capacity battery. In accordance with international air transport standards, the transportation of products with batteries with a capacity of more than 100 Wh is prohibited.

• If the power of the equipment is within the rated output of the product, can it be used?

  • If the power consumption of the product is less than 20%, it can be used at the same time with other products.
  • products with a rated or peak power that exceeds the allowable parameters cannot be used with this charger

• Why does the device make a sound while using it?
  The product uses an air-cooling system, and the built-in fan is better conducive to heat dissipation. A little noise during operation is normal.

• Is it normal for the charger to get warm while charging?
  Charger heating when charging is a normal phenomenon, the standard temperature of the device when charging is in line with national safety standards, you can rest assured to use it!

Warranty

• The warranty period is one year.
• The warranty period starts from the date of purchase by the consumer.
• The warranty does not cover the following cases:
  1. Cosmetic damages, scratches on the body;
  2. Disassembly and repair by non-authorized staff without permission;
  3. Product performance failure caused by human factors.
  4. Damage caused by irresistible factors such as natural disasters, lightning and accidents.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>