SHARPER IMAGE 21.5 32 Inch Touch Screen TV Tablet with Stand User Manual

SHARPER IMAGE 21.5 32 Inch Touch Screen TV Tablet with Stand

It adopts INCELL full high-definition ten-point capacitive touch LCD screen.
To keep your screen clean, make sure it’s clean.

Product Specification

CPU

| octa-core 4ARM Cortex A73@2.0GHz 4ARM Cortex A53@2.0GHz
---|---
RAM| 4GB
Hard Disk| 64GB
Operating System| Android 12
Screen Size| 22inch
Resolution| 10B0x1920 IPS
Point of touch| 10-point capacitive touch screen
Proportion| 16: 9
Wi-Fi| Support
Multiple touch points| 10
Brigntness| 250-300cd/m’
Color gamut| 100%SRGB
Refresh rate| 60HZ
Microphone input| Support external microphone input
Type-c| Support full function (except charging function)
Screen projection| Wireless projection screen, on-line projection screen
Button| Power/Volume+/Volume-
Gravity sensor| Support 90°
Speaker| Bulid- in 40 2.SW*2
Microphone| Noise reduction MIC 4015
Power supply| 12V 6000MAH
Power adapter| 12V 2A
Stand| Movable base, 360°rotation adjustment
Working temperature| o ~ so·c

Product Installation

When the product is installed and assembled, please be sure to lock the fixing screws of the bracket. The bracket falling may cause damage to the product or personal injury.

• The product has a certain weight, please ensure that at least two people cooperate to assemble it when unpacking and installing.
• Do not use foreign matter (oil, grease, etc.) on the screws when assembling the product.
• After the product is installed, do not remove the cable holder and screws.
• For daily use, please make sure that the product is moved in an upright position. If the product is tilted excessively, there is a risk of tipping over, resulting in product failure or personal injury.

1. Open the package box, take out the support and base, align with the chassis position, and insert the support.
2. The bottom of the chassis has a screen bracket fixing screw hole, screw in, fixed.
3. Remove the monitor from the box, attach the machine to the bracket, and tighten the 8 screws.
4. There is a power cable connecting the screen and the battery inside the base. You need to manually connect the interface and cover the cover. Ready to use.

Battery

This product contains a built-in battery in the stand, which can be used for a period of time without connecting to other power sources. The power indicator light will display four lights in descending order according to the remaining battery power. The battery LEDs will light up sequentially during charging or when charging is required.

Note: press the power switch.
Note: press the power switch to pay attention.

• The battery life and usage time after charging will decrease proportionally with the usage time of the product.
• The battery cannot be charged under extreme conditions.
• In standby mode, the remaining battery power will naturally decrease.
• In order to prolong the battery life, it is recommended to charge the battery after using it for a period of time instead of keeping the battery fully charged.
• Keeping the battery at 50% helps extend battery life.
• The maximum usage time after charging for long battery life is 5 hours.
• The standard use time in this manual is based on the value of this laboratory. So actual times may vary depending on usage.
• Using time may be influenced by various factors, including operating temperature of the connected device, using time and user settings, etc.

Precautions

Cautions

1. Please read all instructions carefully before using the product.
2. When cleaning the mobile screen, please unplug the power cord, turn off the power switch, do not use liquid cleaning fluid or spray cleaner, wipe the screen with a soft damp cloth, if it is still not clean, please use LCD screen cleaner.
3. Do not use accessories not recommended by the manufacturer, otherwise it may cause danger.
4. When unplugging the base power interface or the power cable of the power adapter, please hold the power plug. Do not pull the power cable directly by hand to unplug it.
5. This mobile display should only be operated with a power source of the type indicated on its nameplate. If you have doubts about the type of power supply you are using, please consult the mobile display dealer or local power supply bureau.
6. Because there will be high voltage or other dangers when opening or moving the case, please do not repair the monitor by yourself, but contact qualified maintenance personnel for comprehensive maintenance.
7. When the following situations occur, first unplug the power plug of the bottom battery compartment or the power adapter from the socket and contact qualified maintenance personnel for maintenance:
   • The power cord or power plug is damaged or frayed.
   • The monitor has been dropped or the case has been damaged.
   • When the display is obviously abnormal. it indicates that it needs to be repaired.
8. Please place the monitor in a well-ventilated environment away from strong light, high temperature or humidity.
9. Please store the display at a room temperature of 0°C-40° C, if it exceeds this range, it may affect normal use.

Safety Tips! (Stability Hazard)

The monitor may fall, causing serious personal injury. Many injuries, especially among children, can be avoided by taking simple precautions such as:

• Please use the cabinet, shelf, or mounting method recommended by the monitor manufacturer.
• Please use furniture that can safely support the monitor.
• Please educate children about the dangers of climbing on furniture to access the display or its controls·
• Be sure to organize the wires and cables connected to the monitor so that they cannot be tripped over, pulled or caught.
• Never place the monitor on an unstable or inclined position.
• If you want to place the monitor on taller furniture (such as a cabinet or bookshelf), you must fix the furniture and the monitor on a suitable support point.
• Never place the monitor on cloth or other items that may get between the monitor and the supporting furniture.
• Do not place toys, remote controls and other items that may tempt children to climb on the monitor or the furniture on which it is placed. To retain and relocate an existing monitor, the same precautions as above should be taken.

Accessories

• If any of the above is missing, please contact the product dealer.

Note: Please refer to the actual configuration for specific accessories. Please save all packing materials for future removal.

Product Overview

• Power button: press to enter shutdown confirmation: off screen/shutdown/restart
• + Volume+: system volume increase
• – Volume-: System volume decrease

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>