TOPAZ SYSTEMS TD-LBK070 GemView Tilt Stand Installation Guide
- June 1, 2024
- TOPAZ SYSTEMS
Table of Contents
TOPAZ SYSTEMS TD-LBK070 GemView Tilt Stand
Specifications
- Product Name: Topaz GemView Tilt Stand (A-TSL2-1)
- Compatible with: GemView 7, GemView 10, or GemView 10 Touch Tablet Display
- Rotation: 360-degree
- Tilt: Up to 45-degree
- Included: Tilt stand, dual-sided screwdriver, four screws
Product Usage Instructions
Pad Mounting Instructions
- Flip the tablet display over to reveal the mounting holes for the tilt stand base.
- Flip the tilt stand over to align the 4 screw holes with the ones on the GemView 10.
- Rotate the bottom of the tilt stand, if necessary, for easier access in the next step.
- Starting on the right side, insert 2 of the screws and tighten using the provided screwdriver.
- Repeat on the left side. Your tilt stand is now securely attached to the tablet display.
FAQ
-
Q: Can the Tilt Stand be used with other tablet displays?
A: The Tilt Stand is specifically designed for use with GemView 7, 10, or 10 Touch Tablet Displays from Topaz Systems, Inc. It is recommended to use it only with compatible models for optimal performance. -
Q: Are additional screws included in case of loss or damage?
A: The Tilt Stand package includes four screws. If any screws are lost or damaged, please contact Topaz Systems customer support for assistance in obtaining replacements. -
Q: Can the tilt angle be adjusted after mounting?
A: Yes, the tilt angle can be adjusted even after mounting by loosening the screws slightly, adjusting the angle, and then tightening the screws securely again.
Tilt Stand (A-TSL2-1) Mounting Guide
GemView 7 and 10 Tablet Display
(TD-LBK070 and TD-LBK101)
Copyright © 2024 Topaz Systems Inc. All rights reserved.
For Topaz Systems, Inc. trademarks and patents, visit
www.topazsystems.com/legal.
Tilt Stand Mounting Guide (GemView 7 and 10)
Overview
- The Topaz GemView Tilt Stand (A-TSL2-1) is designed to hold the Topaz GemView 7, 10, or 10 Touch Tablet Display. With the tilt stand’s 360-degree rotation and up-to-45-degree tilt, your tablet display can be easily positioned during the signing process.
- The GemView Tilt Stand can be used with the following pads (model numbers beginning with):
- TD-LBK070 (GemView 7)
- TD-LBK101 (GemView 10 and 10 Touch)
- Included with the A-TSL2-1 is the tilt stand, dual-sided screwdriver, and four screws.
Pad Mounting Instructions
- Flip the tablet display over to reveal the mounting holes for the tilt stand base.
- Flip the tilt stand over to align the 4 screw holes with the ones on the GemView 10.
- Rotate the bottom of the tilt stand, if necessary, for easier access in the next step.
- Starting on the right side, insert 2 of the screws and tighten using the provided screwdriver.
- Repeat on the left side. Your tilt stand is now securely attached to the tablet display.