scheppach C-ID180-X Impact Drill Driver Instruction Manual

scheppach C-ID180-X Impact Drill Driver

Product Information

Specifications

• Art.Nr.: 5909245900
• AusgabeNr.: 5909245900_0601
• Rev.Nr.: 29/11/2023
• C-ID180-X
• Manufacturer: Scheppach GmbH
• Model: Cordless Impact Screwdriver
• Voltage: 20V

Product Description

The Cordless Impact Screwdriver is a versatile tool designed for efficient screwdriving tasks. It features various components including a tool holder, battery, LED work light, power switch, direction switch, and a screw.

Package Contents

• 1 x Cordless Impact Screwdriver
• 1 x Screw
• 1 x Instruction Manual

Safety Instructions

It is important to read and follow all safety instructions provided in the manual before operating the tool. Some key safety points include wearing protective eyewear, using respiratory protection in dusty environments, and ensuring proper electrical safety measures.

Product Usage Instructions

1. Charging the Battery: Before use, ensure the battery is fully charged. Insert the battery into the designated slot on the tool.
2. Attaching a Screw: Place the desired screw into the tool holder securely.
3. Operating the Tool: Press the power switch to turn on the tool. Use the direction switch to select the desired rotation direction.
4. Using the LED Work Light: The built-in LED work light can help illuminate dark work areas for improved visibility.
5. Changing the Screw: To change the screw, release it from the tool holder and replace it with a different one as needed.

Frequently Asked Questions

• Q: Is the battery included in the package?

  • A: No, the battery is not included and needs to be purchased separately.

• Q: Can this tool be used for heavy-duty applications?

  • A: The Cordless Impact Screwdriver is suitable for light to medium-duty tasks. For heavy-duty applications, consider using a more powerful tool.

• https://www.scheppach.com/de/service

Explanation of the symbols on the product

Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompanying explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace proper accident prevention measures.

Introduction

Manufacturer:

• Scheppach GmbH
• Günzburger Straße 69
• D-89335 Ichenhausen

Dear Customer

We hope your new product brings you much enjoyment and success.

Note:

In accordance with the applicable product liability laws, the manufacturer of this product assumes no liability for damage to the product or caused by the product arising from:

• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised specialists
• Installing and replacing non-original spare parts
• Improper use

Note:

The operating manual is part of this product. It includes important instructions for the safe, proper and economic operation of the product, for avoiding danger, for minimising repair costs and downtimes and for increasing the reliability and extending the service life of the product. In addition to the safety instructions in this operating manual, you must also observe the regulations applicable to the operation of the product in your country. Familiarise yourself with all operating and safety instructions before using the product. Only operate the product as described and for the specified areas of application. Keep the operating manual in a good place and hand over all documents when passing the product on to third parties.

Product description (fig. 1)

• Tool receiver

• Locking sleeve

• Battery*

• Battery mount

• Release button (battery)

• LED work lamp

• On/off switch

• Rotational direction switch

• Belt clip

• Screw

• = not included in the scope of delivery!

Scope of delivery (Fig. 1)

Item Quantity Designation

• 9. 1 x Belt clip
• 10. 1 x Screw
• 1 x Cordless impact screwdriver
• 1 x Operating manual

Proper use

The product is intended for screwing in and unscrewing screws, as well as tightening and undoing nuts. The power of the motor is converted into even rotary strikes with the rotary strike function of the product. The striking mechanism engages when tightening and undoing. The product may only be used in the intended manner. Any use beyond this is improper. The user/operator, not the manufacturer, is responsible for damages or injuries of any type resulting from this. An element of the intended use is also the observance of the safety instructions, as well as the assembly instructions and operating information in the operating manual. Persons who operate and maintain the product must be familiar with the manual and must be informed about potential dangers. The liability of the manufacturer and resulting damages are excluded in the event of modifications of the product. The product may only be operated with original parts and original accessories from the manufacturer. The safety, operating and maintenance specifications of the manufacturer, as well as the dimensions specified in the technical data, must be observed. Please note that our products were not designed with the intention of use for commercial or industrial purposes. We assume no guarantee if the product is used in commercial or industrial applications, or for equivalent work. Explanation of the signal words in the operating manual

DANGER

Signal word to indicate an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING

Signal word to indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

Signal word to indicate a potentially hazardous situation which, if not avoided, could result in minor or moderate injury.

ATTENTION

Signal word to indicate a potentially hazardous situation which, if not avoided, could result in product or property damage

Safety instructions

WARNING

Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

• a) Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
• b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

• a) The connection plug of the electric tool must fit into the socket. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

• a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• b) Wear personal protective equipment and always safety goggles. Protective equipment such as a dust mask, non-skid safety shoes, safety helmet or hearing protection used for appropriate conditions will reduce personal injuries.
• c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or rechargeable battery, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
• d) Remove any adjusting tools or spanners/keys before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
• h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power tool use and care

• a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• c) Disconnect the plug from the power source and/or\ remove the battery pack, if detachable, from the\ power tool before making any adjustments, changing accessories, or storing power tools. Such precautionary measures reduce the risk of starting the power tool accidentally.
• d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• e) Maintain power tools and attachments. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• g) Use electric tools, insertion tools, etc. according to these instructions. Take into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
• h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Service

• a) Only have your power tool repaired by qualified specialists and only with original spare parts. This will ensure that the safety of the power tool is maintained.

Using and handling the rechargeable tool

• a) Only charge the batteries with battery chargers recommended by the manufacturer. A battery charger that is suitable for a particular type of battery poses a fire hazard when used with other batteries.
• b) Only use the batteries in power tools that are designed for them. The use of other batteries can lead to injuries and a risk of fire.
• c) Keep the unused battery away from paper clips, coins, keys, nails, screws or other small metal objects that could cause a short-circuit between the contacts. A short-circuit between the contacts of the battery could result in burns or fires.
• d) Liquid may leak from the battery if used incorrectly. Avoid contact with it. In case of accidental contact, rinse with water. If the liquid gets into your eyes, seek additional medical attention. Leaking battery fluid may cause skin irritation or burns.
• e) Do not use a damaged or modified battery. Damaged or modified batteries can behave unpredictably and cause fire, explosion or injury.
• f) Do not expose a battery to fire or excessive temperatures. Fire or temperatures above 130°C may cause an explosion.
• g) Follow all charging instructions and never charge the battery or rechargeable tool outside the temperature range specified in the operating manual. Incorrect charging or charging outside the approved temperature range can destroy the battery and increase the risk of fire.
• h) Never attempt to service damaged batteries. Any type of battery maintenance shall be carried out only by the manufacturer or an authorised customer service centre.

Safety instructions for screwdrivers

• Wear hearing protection when impact screwing. Excessive noise can result in a loss of hearing.
• Secure the workpiece. A workpiece held with a clamping device or bench vice is held more securely than with your hand.
• Hold the electric tool firmly. When tightening and undoing screws, high reaction torques may occur for a short time.
• Wait until the electrical tool has come to a standstill before setting it down. The tool attachment can get caught and this can lead to loss of control over the electric tool.
• Hold the device by the insulated gripping surfaces when carrying out work where the screw or the tool attachment may hit hidden power lines. Contact between the screw or tool attachment and a live power line can also electrify metal device parts and lead to an electric shock.

Residual risks

The product has been built according to state-of-theart and recognised technical safety rules. However, individual residual risks can arise during operation.

• Damage to hearing if the stipulated hearing protection is not worn.
• Residual risks can be minimised if the “Safety Instructions” and the “Intended Use” together with the operating manual as a whole are observed.
• Use the product in the way that is recommended in this operating manual. This is how to ensure that your product provides optimum performance.
• Furthermore, despite all precautions having been met, some non-obvious residual risks may still remain.

WARNING

This power tool generates an electromagnetic field during operation. This field can impair active or passive medical implants under certain circumstances. In order to prevent the risk of serious or deadly injuries, we recommend that persons with medical implants consult with their physician and the manufacturer of the medical implant prior to operating the power tool.

WARNING

In case of extended working periods, the operating personnel may suffer circulatory disturbances in their hands (vibration white finger) due to vibrations. Raynaud’s syndrome is a vascular disease that causes the small blood vessels on the fingers and toes to cramp in spasms. The affected areas are no longer supplied with sufficient blood and therefore appear extremely pale. The frequent use of vibrating products can cause nerve damage in people whose circulation is impaired (e.g. smokers, diabetics). If you notice unusual adverse effects, stop working immediately and seek medical advice.

ATTENTION

The product is part of the 20V IXES series and may only be operated with batteries of this series. Batteries may only be charged with battery chargers of this series. Observe the manufacturer’s instructions

WARNING

Follow the safety and charging instructions and correct usage given in the instruction manual of your 20V IXES Series battery and charger. A detailed description of the charging process and further information are provided in this separate manual.

Technical data

• ¼ inch cordless impact screwdriver C-ID180-X
• Engine voltage 20 V
• Idle speeds n0 0 – 2800 rpm
• Nominal impact speed 0 – 3600 rpm
• Max. torque 180 Nm
• Tool receiver ¼ inch
• Suitable for metal screws ≤ M8
• Suitable for wood screws ≤ 8 mm Ø
• Weight (without battery) 1.3 kg
• Temperature max. 50°C
  • Operation -20 – 50°C
  • Storage 5 – 30°C

Subject to technical changes!

Noise and vibration

WARNING

Noise can have serious effects on your health. If the machine noise exceeds 85 dB, please wear suitable hearing protection for you and persons in the vicinity. The noise and vibration values have been determined in accordance with EN 62841-1.

Noise data

Vibration parameters

The total vibration emission values specified and the device emissions values specified have been measured in accordance with a standardised test procedure and can be used for comparison of one electric tool with another. The total noise emission values specified and the total vibration emission values specified can also be used for an initial estimation of the load

WARNING

The noise emission values and vibration emission value can vary from the specified values during the actual use of the power tool, depending on the type and the manner in which the electric tool is used, and in particular the type of workpiece being processed. Try to keep the stress as low as possible. For example: Limit working time. In doing so, all parts of the operating cycle must be taken into account (such as times in which the power tool is switched off or times in which it is switched on, but is not running under a load).

Unpacking

WARNING

The product and the packaging material are not children’s toys!

• Do not let children play with plastic bags, films or small parts! There is a danger of choking or suffocating!
• Open the packaging and carefully remove the product.
• Remove the packaging material, as well as the packaging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport damage. Immediately report any damage to the transport company that delivered the Product. Later claims will not be recognised.
• If possible, keep the packaging until the expiry of the warranty period.
• Familiarise yourself with the product by means of the operating manual before using for the first time.
• With accessories as well as wearing parts and replacement parts use only original parts. Spare parts can be obtained from your specialist dealer.
• When ordering please provide our article number as well as type and year of manufacture for the product.

Operation

The cordless impact screwdriver has clockwise/anticlockwise rotation, a ¼ inch hexagon socket bit mount and an LED work lamp. Please refer to the following descriptions for the function of the controls.

WARNING

Danger of injury!
Remove the battery from the power tool before carrying out any work on the power tool (e.g. maintenance, tool change, etc.) and when transporting and storing it. There is a risk of injury if the on/off switch is operated unintentionally.

ATTENTION

Make sure that the ambient temperature does not exceed 50°C and does not fall below -20°C during work.

ATTENTION

The product is part of the 20V IXES series and may only be operated with batteries of this series. Batteries may only be charged with battery chargers of this series. Observe the manufacturer’s instructions.

Mounting the belt clip (9)

1. During work breaks, the product can be hooked onto the belt with the integrated belt clip (9).
2. Screw the belt clip (9) with the screw (10) to the right or left screw-on point on the product, as required. Use a Phillips screwdriver for this (not included in the scope of delivery).

Note:

Make sure that the product is switched off and secured against being switched on.

Inserting/removing the battery (3) in the battery mount (4) (Fig. 1, 2)

Inserting the battery

1. Put the rotational direction switch (8) in the middle position (lock).
2. Push the battery (3) into the battery mount (4). The battery (3) clicks into place audibly.

Removing the battery

1. Press the unlock button (5) of the battery (3) and remove it from the battery mount (4).

Inserting/removing the tool attachment (Fig. 1)

CAUTION

Keep your hands away from the tool attachment when the product is in operation.

Note:

• • = not included in the scope of delivery!

1. Insert a tool attachment* into the tool receiver (1).
2. To insert the tool attachment, pull the locking sleeve (2) back and allow the attachment tool to engage.
3. To remove the tool attachment again, pull the locking sleeve (2) back and remove the attachment tool.

Test run (Fig. 1)

Note:

Before the first work and after each tool attachment change, carry out a test run without load. Switch off the product immediately if the tool attachment runs out of round, there is considerable vibration or abnormal noises are heard.

1. Before operation, check whether the tool attachment is properly attached, i.e. centred in the locking sleeve (2).
2. Screw bits are marked with their dimensions and shape. If you are unsure, always try out first whether the bit sits in the screw head without play.

Adjusting the direction of rotation (Fig. 1)

ATTENTION

The direction of rotation switch may only be actuated when idle. With the direction of rotation switch, you can select the direction of rotation of the product (clockwise or anti-clockwise) and secure the product from being switched on unintentionally. The arrow on the direction of rotation switch indicates the working direction.

1. Wait until the product has come to a standstill.
2. Push the direction of rotation switch (8) to the desired position:
   • Clockwise rotation: For screwing in screws and nuts. Press the direction of rotation switch on the right, with the arrow pointing forwards.
   • Anti-clockwise rotation: For undoing screws and nuts. Press the direction of rotation switch on the left, with the arrow pointing backwards.
3. Switch lock: Put the direction of rotation switch in the centre position.

On/Off switch (7) (Fig. 1)

1. To switch on the product, push the on/off switch (7).
2. To switch off, release the on/off switch (7). If you put the direction of rotation switch (8) in the centre position, the product is secured from being switched on.

LED work lamp (6) (Fig. 1)

This product is equipped with an LED work lamp to illuminate the immediate work area and improve visibility in poorly lit environments.

CAUTION

Do not look directly into the LED work lamp or the light source.

1. The LED work lamp (6) lights up automatically as soon as the product is switched on.

Note:

The LED work lamp remains lit up for approx. 10 seconds after the product is switched off.

Setting the speed/tightening torque (Fig. 1)

1. Apply light pressure to the on/of switch (7). This ensures a low speed/tightening torque. Applying more pressure to the on/off switch (7) increases the speed/ tightening torque.

Note:

The tightening torque is dependent on the chosen speed and the impact duration.

ATTENTION

The actual tightening torque achieved must always be checked with a torque wrench!

Note:

The integrated motor brake ensures a quick standstill.

Working instructions

Note:

• • = not included in the scope of delivery!

Undoing

• If the screws/nuts are very tight or rusted, they must be “loosened” with a wheel brace or torque wrench Tightening

ATTENTION

The cordless impact screwdriver should only be used for undoing screws/nuts. However, if screws/nuts are to be tightened with the impact screwdriver, a torque limiter* designed for this purpose must be used as this may otherwise damage the screw connection.

• Carefully insert the screw/nut into the thread before tightening.
• Only tighten the screws/nuts, for which a torque specification applies (e.g. in the motor vehicle sector, by the specifications of the vehicle manufacturer), with a torque limiter designed for this purpose. Torque
• Small screws/bits may be damaged if the torque or the speed is set too high.

WARNING

Retighten or check the screws/nuts with a torque wrench* to the torque stipulated by the manufacturer!

Cleaning and maintenance

WARNING

Have maintenance and repair tasks that are not described in this operating manual, carried out by a specialist workshop. Use only original spare parts.

There is a risk of accident! Always perform maintenance and cleaning work with the battery removed. There is a danger of injury! Let the Product cool down before all maintenance and cleaning tasks. Elements of the engine are hot. There is a danger of injury and burning! The product can start unexpectedly and cause injuries.

• Remove the battery.
• Allow the product to cool down.
• Remove the tool attachment

Cleaning

1. Keep protective devices, air vents and the motor housing as free of dust and dirt as possible. Rub the product clean with a clean cloth or blow it off with compressed air at low pressure. We recommend that you clean the product directly after every use.
2. Ventilation openings must always be free.
3. Do not use any cleaning products or solvents; they could attack the plastic parts of the product. Make sure that no water can penetrate the product interior.
4. Wipe any dirt off the lens with a dry cloth. Be careful to avoid scratching the LED lamp as this can severely reduce the light intensity.

Maintenance

The product is maintenance-free.

Storage

Preparation for storage

1. Remove the battery.
2. Clean and check the product for damage.

Store the product and its accessories in a dark, dry and frost-free place that is inaccessible to children. The optimum storage temperature is between 5°C and 30˚C. Store the product in its original packaging. Cover the product to protect it from dust or moisture. Store the operating manual with the product. 12 Repair & ordering spare parts With this product, it is necessary to note that the following parts are subject to natural or usage-related wear, or that the following parts are required as consumables.

ATTENTION

According to the German Product Liability Act, no liability is accepted for damage caused by improper repairs or by not using original spare parts. Such work should be performed by a customer service centre or an authorised specialists. The same applies to accessory parts. Spare parts and accessories can be obtained from our Service Centre. To do this, scan the QR code on the front page.

Ordering spare parts

Please provide the following information when ordering spare parts:

• Model designation
• Item number
• Type plate data

Spare parts / accessories

Disposal and recycling

Notes for packaging

The packaging materials are recyclable. Please dispose of packaging in an environmentally friendly manner.
Notes on the electrical and electronic equipment act [ElektroG] Waste electrical and electronic equipment does not belong in household waste, but must be collected and disposed of separately!

• Used batteries or rechargeable batteries that are not installed permanently in the old appliance must be removed non-destructively before disposal! Their disposal is regulated by the battery act.
• Owners or users of electrical and electronic devices are legally obliged to return them after use.
• The end user is responsible for deleting their personal data from the old device being disposed of!
• The symbol of the crossed-out dustbin means that waste electrical and electronic equipment must not be disposed of with household waste.
• Waste electrical and electronic equipment can be handed in free of charge at the following places:
  • Public disposal or collection points (e.g. municipal works yards)
  • Points of sale of electrical appliances (stationary and online), provided that dealers are obliged to take them back or offer to do so voluntarily.
  • Up to three waste electrical devices per type of device, with an edge length of no more than 25 centimetres, can be returned free of charge to the manufacturer without prior purchase of a new device from the manufacturer or taken to another authorised collection point in your vicinity.
  • Further supplementary take-back conditions of the manufacturers and distributors can be obtained from the respective customer service.
• If the manufacturer delivers a new electrical appliance to a private household, the manufacturer can arrange for the free collection of the old electrical appliance upon request from the end user. Please contact the manufacturer’s customer service for this.
• These statements only apply to devices installed and sold in the countries of the European Union and which are subject to the European Directive 2012/19/EU. In countries outside the European Union, different regulations may apply to the disposal of waste electrical and electronic equipment.

Notes on lithium-ion batteries

Remove the battery before disposing of the device!

• Do not dispose of the battery in household waste, in a fire (risk of explosion) or in water. Damaged batteries can harm the environment and your health if toxic vapours or liquids escape.
• Defective or used batteries must be recycled in accordance with Directive 2006/66/EC.
• Hand in the device and the battery charger at a recycling centre. The plastic and metal parts used can be separated by type and thus recycled.
• Dispose of batteries when discharged. We recommend covering the poles with an adhesive strip to protect against a short circuit. Do not open the battery.
• Dispose of batteries according to local regulations. Return batteries to a used battery collection point where they can be recycled in an environmentally friendly manner. Ask your local waste disposal company about this

Troubleshooting

battery.
The battery is not properly inserted.| Push the battery into the battery mount. The battery clicks into place audibly.
The direction of rotation switch is in the centre position.| Push the direction of rotation switch to the left or right.

Warranty conditions –  Scheppach 20V IXES series

Revision date 11/07/2023

Dear customer,

our products are subject to strict quality checks. However, if a product does not function perfectly, we deeply regret this and ask that you contact our customer service at the address specified below. We will also be glad to assist you by telephone via the service number. The following information is intended to help you to process and settle your claim without any problems.

For the assertion of warranty claims, the following applies:

1. The warranty conditions govern our additional manufacturer warranty services for purchasers (private end consumers) of new products. The statutory warranty claims are not affected by this warranty. This is the responsibility of the dealer who you purchased the product from.

2. The warranty service extends exclusively to defects in a new product purchased by you that are based on a material or manufacturing fault and is, at our discretion, limited to the repair of such defects free of charge or the replacement of the product (also replacement with a successor model, if necessary). Replaced products or parts shall become our property. Please note that our products were not designed for commercial, trade or professional use. A warranty claim is therefore not valid if the product has been used in commercial, trade or industrial operations within the warranty period or has been subjected to equivalent stress.

3. The following are excluded from our warranty services:

   • Damage to the product which was caused by nonobservance of the assembly instructions, improper installation, non-observance of the operating instructions (e.g. connection to an incorrect mains voltage or type of current) or the maintenance and safety regulations or use of the product in unsuitable environmental conditions as well as by insufficient care and maintenance.
   • Damage to the product caused by misuse or improper application (such as overloading the product or using non-approved tools and accessories), penetration of foreign bodies into the product (such as sand, stones or dust), transport damage, use of force or external influences (such as damage caused if dropped).
   • Damage to the product or parts of the product which is due to intentional, normal (operational) or other natural wear as well as damage and/or wearing of wear parts.
   • Defects in the product which have been caused by the use of accessories, expansions or spare parts that are not original parts or are not used as intended.
   • Products on which changes or modifications have been made.
   • Minor deviations from the target characteristics which are irrelevant for the value and usability of the product.
   • Products on which unauthorised repairs have been carried out, in particular by an unauthorised third party.
   • If the marking on the product or the identification information of the product (machine label) is missing or illegible.
   • Products that are very dirty and are therefore refused by the service personnel.
   • Claims for damages and consequential damages are generally excluded from this warranty.

4. The warranty period is usually 5 years (12 months for batteries/rechargeable batteries) and starts from the date of purchase of the product. The date on the original purchase receipt is decisive. Warranty claims must be made immediately after becoming aware of them. The assertion of warranty claims after expiry of the warranty period is excluded. The repair or replacement of the product does not result in an extension of the warranty period, nor does this service initiate a
   new warranty period for the product or for any installed spare parts. This also applies when using an on-site service. The product concerned is to be cleaned and returned to the service centre together with a copy of the purchase receipt, which must include the date of purchase and the product designation. If a product is sent in incomplete without the complete scope of delivery, the missing accessories will be charged / deducted in value if the product is exchanged or in the event of a refund. Partially or completely dismantled products cannot be accepted as a warranty claim. In the event of an unjustified complaint or if outside the warranty period, the purchaser shall generally bear the transport costs and the transport risk. Please report a warranty claim in advance to the service centre (see below). It is generally agreed upon that the defective product will be returned to the service address given below with a brief description of the fault by organised return or, in the case of repair outside the warranty period, with sufficient postage, taking the appropriate packaging and shipping guidelines into account. Please note that your product (depending on the model) will be free of all operating materials when returned for safety reasons. The product sent to our service centre must be packaged in such a way that damage to the product under complaint is avoided during transport. After successful repair / replacement, we will send the product back to you free of charge. If products cannot be repaired or replaced, a sum up to the purchase price of the defective product may be refunded at our own discretion, taking into account any deduction for wear and tear. These warranties are only for the benefit of the original private purchaser and cannot be assigned or transferred.

5. Extension of the warranty period to 10 years: Scheppach offers an additional warranty extension of 5 years on products of the Scheppach 20V series. Thus, the warranty period for these products totals 10 years. Batteries / rechargeable batteries, battery chargers and accessories are excluded from this. You can claim this warranty extension by registering your Scheppach product from this range at https://garantie.scheppach.com no later than 30 days from the date of purchase. After registering online successfully, you will receive confirmation for the item-related warranty extension.

6. In order to submit your warranty claim, please contact our service centre. Preferably, please use our form on our homepage:
   https://www.scheppach.com/de/service Please do not send us any products without first contacting and registering with our service centre. Contacting our service centre first is mandatory to claim these warranty promises. Warranty claims must be made before expiry of the warranty period within 14 days of discovery of the defect. For this purpose, the original purchase receipt and, if necessary, confirmation of the item-related warranty extension are required.

7. Processing time – We normally process complaint consignments within 14 days of receipt at our service centre. If, in exceptional cases, the processing time mentioned is exceeded, you will be informed in good time.

8. Wear parts are generally excluded from the warranty! – Wear parts are:

   • a) supplied, attached and/or installed batteries / rechargeable batteries as well as
   • b) all model-dependent wear parts (i.e. belts, saw blades, tool attachments, grinding discs, filters, carbon brushes etc., see operating manual). The warranty does not cover batteries or rechargeable batteries that are deeply discharged or those with damaged housing or battery terminals.

9. Cost estimate – Products that are not covered or no longer covered by the warranty will be repaired at extra cost. Upon request to our service centre, you can send in the defective products for a cost estimate and, if necessary, give the service centre approval for the repair in writing (by post, e-mail). No further processing will take place without approval for the repair.

10. Claims other than those mentioned above cannot be asserted. The warranty conditions only apply in the current version at the time of the complaint and, if necessary, can be found on our homepage (www.scheppach.com. In case of translations, the German version is decisive.

    • Scheppach GmbH ·
    • Günzburger Str. 69 ·
    • 89335 Ichenhausen (Germany)
    • Tel: +800 4002 4002 ·
    • E-Mail: customerservice.GB@scheppach.com ·
    • Internet: https://www.scheppach.com We reserve the right to make changes to the warranty conditions at any time without prior notice.

EU Declaration of Conformity

• Original Declaration of Conformity
• Manufacturer:
• Scheppach GmbH
• Günzburger Straße 69
• D-89335 Ichenhausen

We declare under our sole responsibility that the product described here complies with the applicable directives and standards.

• Brand: SCHEPPACH
• Item designation: CORDLESS IMPACT
• SCREWDRIVER C-ID180-X
• Item No. 5909245900

EU directives:

2014/30/EU, 2006/42/EC, 2011/65/EU*

• The object of the declaration described above fulfils the regulations of the directive 2011/65/EU of the European Parliament and Council from 8th June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Applied standards:

• EN 62841-1:2015/A11:2022; EN 62841-2-2:2014;
• EN IEC 55014-1:2021; EN IEC 55014-2:2021
• Documentation authorised representative:
• Georg Kohler
• Günzburger Str. 69
• D-89335 Ichenhausen
• Ichenhausen, 29.11.2023

SCHEPPACH GMBH

• Günzburger Str. 69
• D-89335 Ichenhausen

Stand der Informationen · Status of the information ·

• www.scheppach.com

References

• Scheppach Product Registration
• pach.com
• pach.com/de/service
• scheppach | scheppach
• Kontakt & Service | scheppach | scheppach
• Scheppach Product Registration
• scheppach | scheppach
• scheppach | scheppach
• scheppach | scheppach
• Kontakt & Service | scheppach | scheppach

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>