FLAGRANTI CRAVE VESPER 2 Necklace with Vibrator User Manual
- June 1, 2024
- FLAGRANTI
Table of Contents
FLAGRANTI CRAVE VESPER 2 Necklace with Vibrator
CONTROL
- Screw on the cap fully. If the cap is not tightened or is missing, the vibrator will be momentarily vibrate rhythmically for a moment, but will not start.
- Briefly press the button on the body of the vibrator to start the first vibration mode.
- Additional short presses of the button change the individual rhythms.
- Hold the button for 2 seconds to turn it off.
ATTENTION! Use only to stimulate the clitoris or nipples, not the vagina or anus!
MAINTENANCE
After each use, rinse the product with lukewarm water and soapy detergent.
You can also use an erotic cleaner, which also helps to remove
microscopic dirt.
Simply spray the product, leave it on for about 1 minute and then dry with a
towel or cloth that does not leak fibers.
WATERPROOF
The product is waterproof, so maintenance is very easy.
It may get splashed with water, but you can safely immerse it in water and
enjoy water play.
LUBRICATION
Due to the material of the product, you can use lubricants of any base.
DRIVE AND CHARGING
The product is powered by an integrated Li-on battery, which is approximately
half charged from the factory, but we recommend that you fully charge it
before first use.
Charge the battery using the included USB cable, which can be plugged into a
phone adapter, PC or power bank. When charging, the LED flashes and when fully
charged, the LED control lights up permanently.
STORAGE
Store separately from other erotic aids in a dry and dark place.
PACKAGING CONTENTS
In the package you will find a necklace with a vibrator and a USB cable for charging.
Customer Support
Do you want to work?
Nopiste nam no flogranti@flogranti.cz
or call no tel.: +420 774 082 678
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>