iBroPrat 2 Sets Trailer Hub Kit Trailer Axle Kit Lug Trailer Hub with Extra Dust Instruction Manual
- June 1, 2024
- iBroPrat
Table of Contents
iBroPrat 2 Sets Trailer Hub Kit Trailer Axle Kit Lug Trailer Hub with
Extra Dust
How to Confirm That You Can Replace
Measure Your Hub Bolt Pattern
Take the 5-lug hub as an example, if the length of measurement is 4.5″, and as there are 5 lugs, then the bolt pattern is 5×4.5″. 5 lug is from the OUTERMOST point of a hole TO the CENTER of another hole.
Confirm Bearing and Spindle Sizes
Verify that the bearing models are L68149 and L44649. Verify your spindle is 1-1/16″ to 1-3/8″ Trailer Axles 3500lb #84 Spindle. Both round and square spindle can be used.
Package Include & Dimensions
4.5″ diameter| 2-5/8″ length| 1.34″ length| 1-3/8″ Inner Diameter| 1-1/16″
Inner Diameter| 1.72″ Inner Diameter
---|---|---|---|---|---
1.98″ diameter| 2.55″ diameter| 0.45″ height| 0.7″ height| L68149 Inner
Bearing| L44649 Outer Bearing
1″ Inner Diameter Washer| 2.3″ length Cotter Pin| 1/2″-20 Thread Lug Nut|
1.98″ Outer Diameter Dust Cap| For 1.18″ Hole Rubber Plug| For Spindle with 1″
Thread Spindle Nut
How to Install
- Install L68149 bearing.
- Install grease seal.
- Install hub.
- Install L44649 bearing.
- Install washer.
- Install spindle nut.
- Install cotter pin.
- Install dust cap.
- Install lug nuts.
Notice
- Please measure your hub dimensions before installation. This can effectively avoid the case of failure to install.
- For whatever reason, if you are not satisfied, please do not hesitate to contact us if you have any questions.
- You can contact us at iBroPrat@outlook.com.
FAQ
- What is the importance of measuring the hub bolt pattern before installation?
- Measuring the hub bolt pattern ensures compatibility with the 5 on 4.5″ hub and prevents installation failure.
- Are both round and square spindles compatible with this kit?
- Yes, both round and square spindles can be used as long as the spindle sizes are within the specified range.
- What should I do if I encounter issues with the installation?
- If issues arise, it is recommended to re-measure the hub dimensions and contact iBroPrat customer support for assistance.
HOW TO CONFIRM THAT YOU CAN REPLACE
Measure Your Hub Bolt Pattern
NOTICE:
Take the 5-lug hub as an example, if the length of measurement is 4.5″, and as there are 5 lugs, then the bolt pattern is 5×4.5″
- 5 lug is from the OUTERMOST point of a hole TO the CENTER of another hole
Confirm Bearing and Spindle Sizes
NOTICE:
- Verify that the bearing models are
- L68149 and L44649.
- Verify your spindle is 1-1/16″ to 1-3/8″
- Trailer Axles 3500lb #84 Spindle.
- Both round and square spindles can be used.
PACKAGE INCLUDE & DIMENSION
HOW TO INSTALL
- Step 1: Install the L68149 bearing
- Step 2: Install grease seal
- Step 3: Install the hub
- Step 4: Install L44649 bearing
- Step 5: Install the washer
- Step 6: Install spindle nut
- Step 7: Install the cotter pin
- Step 8: Install dust cap
- Step 9: Install lug nuts
NOTICE
- Please measure your hub dimensions before installation. This can effectively avoid the case of failure to install.
- For whatever reason, if you are not satisfied, please do not hesitate to contact us if you have any questions.
- You can contact us at iBroPrat@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>