4O3A Signature CAT2BCD Bcd Decoder Instruction Manual
- June 1, 2024
- 4O3A Signature
Table of Contents
4O3A Signature CAT2BCD Bcd Decoder
Specifications:
- Product Name: B2BCD Firmware Update Guide
- Compatibility: Works with B2BCD devices
- Version: 1.4.0
Product Usage Instructions
Step 1: Connect and Prepare
- Install the application provided with the B2BCD device on your PC.
- Connect your B2BCD to your PC via USB.
- Launch the B2BCD Utility application.
Step 2: Enter Bootloader Mode
- While focusing on the utility, press and hold Ctrl + Alt + B to enter the bootloader mode.
- Confirm entering the bootloader mode.
- Right-click on your CAT2BCD icon within the utility and select “Open File Location”.
- Locate the CAT2BCD_USBBootloader.zip file in the folder where the B2BCD Utility is installed.
- Extract the zip file and run HIDBootloader.ex
B2BCD Firmware Update Guide
-
Download the latest B2BCD utility found on the website, under Other Devices – B2BCD: https://4o3a.com/support/downloads
-
Install the application, connect your B2BCD to your PC via USB and connect using the B2BCD Utility.
-
In order to upgrade the firmware on the device you need to enter the bootloader mode. While focusing the utility, hold Ctrl + Alt + B. Confirm entering the bootloader mode.
-
Right click on your CAT2BCD icon and select Open File Location.
-
In the same folder where the B2BCD Utility is installed you will find CAT2BCD_USBBootloader.zip
-
Extract this zip and run the HIDBootloader.exe
This will create a new folder
Run HIDBootloader.exe
Click on the Open Firmware Image button and load the new firmware image. The
version of the firmware must match your app version, in this case
cat2bcd_v1_4_0.hex
The default file path is C:\Program Files (x86)\4O3A Signature\Band2BCD
Click the Erase/Program/Verify Device and wait for the process to end.
After installing the new firmware, power cycle the device by unplugging and plugging in the power connector.