ThinkLite Air Flair 2.0 IAQ Monitor User Manual
- June 3, 2024
- ThinkLite Air
Table of Contents
Air Flair 2.0 IAQ Monitor
User Manual
Installing your Flair Air Quality Monitor
Contents:
- ThinkLite Flair Monitor
- Sensor Capsules (x2)
- Mounting Screws
- Ethernet Cable
- Wall Plug
- Magnetic Monitor Cover
- Wall Mount
- Outlet Adaptors
- Monitor Power Cord
- Instruction Guide
Where should it go and how to use it?
We recommend mounting your monitor on your wall anywhere from 3-7 feet above
the floor. This is the optimal data zone for monitoring airborne pathogens and
where it is most effective to have the monitor gauge data.
Usage Scenarios
Our ThinkLite Air Quality experts can help you determine the most effective
installation locations based on your floor plan.
The best placement for your Flair Air Quality Monitor is in a central location
where it can get the most accurate air samples of the room.
We recommend having your monitor installed away from the
following:
- The reason for this is to avoid anomalies, which can misrepresent your data and ultimately misguide your facility
- Each closed room in which people tend to congregate will need its own device to get information on the air quality.
- Examples may include conference rooms, restrooms, private suites, offices, etc.
- For large open areas, such as lobbies, warehouses, and open offices, it’s best to space out the ThinkLite Flair Air Monitors to allow for 1 device per 5,000 square feet of open space.
STEP 1. Separate the monitor from the back shell.
STEP 2.
Insert the sensor modules into the base of the monitor. They can be inserted
into either side, left or right. Push gently until you hear an audible click
and each sensor is fully seated.
STEP 3. Use a level to make sure you are mounting the back shell straight
on the wall. Use a drill to make the holes and the two longer (A) screws
provided to securely install the shell on the wall. STEP 4. Fit the Flair
monitor into the back shell on the wall. STEP 5. Use the smaller screw (B)
to secure the monitor in the back shell. STEP 6. (a.) Plug the cable into
a wall outlet and then into either the side of the monitor or the back of the
device, and then turn on the power
STEP 6. (b.) Plug the PoE into a wall outlet and
then into either the bottom of the monitor or the back of the device, and then
turn on the power 
Product Specifications: ThinkLite Flair 2.0
| Power Consumption: | 10W |
|---|---|
| Power Input Options: | PoE / 10-3W DC direct wire / 24V AC direct wire / |
110-120V AC USB-C powered
Connectivity & Security| WiFi / Ethernet 802.1X EAP-TLS Authentication
Battery:| 5200mAh / 4.2V Usage Time: Up to 2 hrs
Warranty:| Monitor 5 Years Sensor Modules: 2 years
Accessories:| Wall mount plate, drywall anchors & screws. USB cable, power
adapter, ethernet cable
Certifications:|
Usage:| This product is used for indoor air quality monitoring, and can be
used as a wall-mounted or portable IA0 monitor
| Sensor Type| Measuring Range| SeRnesosorlOutiuotpnut|
Accuracy
---|---|---|---|---
Particulate Matter (PM ):
PM0.1/0.3/0.5/10/2.5/5.0/10.0
Particulate Count (PC ):
PC0.1/0.3/0.5/1.0/2.5/5.0/10.0| Sensor| Laser Particle| !µg/m’| ± >10%
(± 10µg/m3)
Total Volatile Organic
(TVOCs
Compounds )| Metal Oxide
Semiconductor
Sensor (MOS)| 0-60,000ppb| 1ppb| ±5%
Carbon Dioxide (CO2)| Non-Dispersive
Infrared Detector
(NDIR)| 400-2,000ppm| 1 ppm| ±2%RH
Humidity| Digital Sensor| 0-99%RH| 1%RH| ±2° F
Ozone (04| Electrochemical Digital Sensor| 0-200ppb| 1ppb| ±2%
Temperature & Dew Point Temperature| Digital Sensor| -4° – 212° F| 1° F| ±1° F
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>