EAGOU DIARY DMX512 Double Moving Head Light User Manual

EAGOU DIARY
DOUBLE MOVING HEAD LIGHT
USER MANUAL

Thank you for purchasing our product Please Read before Operating the Light Fixture

Before You Begin

Package Content:

• 1*Double Moving Head Light
• 1*Powe! Cable
• 1°IR Remote Control
• 1°User Manual
• 1*Mounting Bracket
• 3°Screws

Unpacking Instructions:
Carefully unpack the product immediatety and check the container to make sure all the parts are in the package and are ir good condit on.
Caution:
There are nc user sefviceable parts inside the fixture Do not open the housing or attempt any repairs yourself in the unlikely s:tuation, your unit may require service, please contact us: [email protected]
Disclaimer:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manua or any unauthorized modification te the equipment.
Attention:

• Please keep this User Manual for future consultation,
• Unpack and Check carefully there is no transportation damage before using the fixture.
• Before operating, ensure that the voltage and frequency of power supply match the power requirements of the fixture.
• Disconnect main power before servicing anc maintenance.
• Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR souter casing. Grounding the shield could cause a short circuit and erratic behavior.
• Keep the voltage of the power supply with the master light.
• Do not connect with other electric cable and the DMX512 signal cable.
• To ensure the earthing conductor of the switch well before connecting with AC 110V 240V.
• The earthing conductor is the yellow and green.
• Use safety chain when fixes this fixture. Don’t handle the fixture by taking its head only, but always by taking its base.
• Do not connect the device to any dimmer pack.
• Donot touch any wire during operation and there might be a hazard of electric shock.
• To prevent or reduce the risk of electrical shock or fire. do not expose the fixture to rain of moisture.
• Do not look directly at the LED light beam while the fixture is on. =

Technical Specifations:

Voltage: AC110-240V, 50/60Hz
Power: 40W
LED BALL: 1pcs10W 4in1 RGBW OSRMA leds
LED WASH: 4pcs6W 4in1 RGBW leds
PanTilt movement: X-axis: 540°, Y-axis: 270°
LEDBALL Angle: 2°
LEDWASH Angle: 25°
Dimmer: 0-100% linear dimming
Flash: Electric flash, 0.3-25 times second
Operation: Auto. DMX512,Sound. Master/Slave
Channel: 14/18CH
Package Size: 21.5×15.6×18 cm
Weight: 1.55kg

Control Panel Instructions

a) Illustration: b) Operation Instructions:
After power on press “MENU” key to appear the following function in turn and then press “ENTER” key to confirm. (This order is the new machine order if the light has used other modes and saved the mode before shut down, it will show the mode before shutdown again) Other functions need to be saved by pressing “ENTER” key after setting up, otherwise the effect of setting before shut down will not occur after the next boot.

IR Remote Control Instruction

Note: The remote control requires two AAA batteries to work and the batteries are not included in the package.

DMX512,14CH Description:

DMX512, 18CH Description:

(CH16 0-14 valid)
36-255| 10 color temperature adjustment
16| 0-14| Manual dimming or color temperature selection
15-255| Color selection
17| 0-9| No flash
10-140| Flash 0-100%
141-255| Random flash speed
18| 0-9| Manual dimming /color selection/color temperature selection
10-199| Self-going
200-209| Waiting for 2S reset
210-239| Manual dimming /color selection/color temperature selection
240-255| Sound Mode

DMX Signal Connection

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>