VMAXTEL GY-Q10C Wireless Charger User Manual
- June 1, 2024
- VMAXTEL
Table of Contents
VMAXTEL GY-Q10C Wireless Charger
Product Information
Specifications:
- Model: Earphone
- Impedance: 30 ohms
- Sensitivity: 30 dB
- Frequency Response: 30 Hz – 20 kHz
Product Usage Instructions
Connecting the Earphones:
Insert the 3.5mm audio jack of the earphones into the audio output of your
device.
Adjusting the Fit:
Gently place the earphone buds in your ears and adjust for a comfortable
and secure fit.
Controlling Playback:
Use the inline controls, if available, to adjust volume,pause/play music,
or answer calls.
Maintenance:
Keep the earphones clean by wiping them with a soft, dry cloth.
Avoid exposing them to moisture.
FAQ:
Q: Are the earphones water-resistant?
A: No, these earphones are not water-resistant. Avoid them exposing to
water or moisture.
Q: How can I improve the sound quality?
A: Ensure that the earphones are properly inserted into your ears for a
good seal. You can also adjust the equalizer settings on your device for
better sound.
Please read the instructions carefully before using
Product Introduction
This product is a 3 in 1 multi-functional wireless charging station, which supports fast charging for phone, Watch and earphone at the same time, it provides high efficiency and stable wireless charging for you.
Method of Operation
Assemble according to the instructions in the following diagram.
- Use charging cable provided in the package to connect with the wireless charger, plug the adapter in the power supply.
- Place the devices to be charged in the corresponding charging area, then it will start charging.
LED Light Instructions
These 3 LED indicator lights will change according to the charging status of phone, iWatch and AirPods.
Specification
- Input: 9V = 2A
- Phone Output: 15W/10W/7.5W/5W
- Earbuds Output: 3.0W
- Watch Output: 2.5W
- Input socket: Type-C
- Transmission Distance (for Phone): ≤4mm
- Product Size: 15213612mm(disassembled)
Compatible Model
-
Phone
Phone with wireless charging function and compatible with charging protocol -
Watch
Apple Watch 9/8/7/6/5/4/3/2/SE 2/SE/Ultra/Ultra 2 -
AirPods
AirPods Charging: for AirPods 2/3/Pro/Pro2(can work with A2700, A2566,A2190, A1938 AirPods case)
Note: Does not support A2897, A1602 AirPods case
Q&A
Q: What should I do if the charger doesn’t work or charge devic es
intermittently?
A: Please check the following steps:
- Please make sure your devices have wireless charging function and can be charged wirelessly.
- Please use the adapter and cable provided in the package
- Please check if the charging indicator light is on, if not, please unplug and reinsert the adapter and cable.
- Please use other 18W adapter and charging cable to check if the adapter and cable are damaged.
- Please make sure that the thickness of the phone case is <=4mm (if there is a case) and there are no any metal, pop rings, credit cards or magnetic interference charges.
- Please align the coil of your devices with the charging center.
- Update your device to the latest system and restart the device.
Q: What should I do if the charging is slow?
A: Please check the following steps:
- Please make sure to use the 18W adapter and cable provided in the package.
- Charging efficiency depends on the receiving power of your dev ices and it is not recommended to keep the APP running during slow charging.
Q: What should I do if the charger heats up during charging?
A: Please check the following steps:
- It is normal for the receiving coil or transmitter board to generate heat during wireless charging. If the charger is too hot please take yo ur phone off from charger to wait the charger to cool down and charge again.
- It is recommended to avoid using the charger in high tempera ture and sun exposure environments as possible.
Safety Notice
- Do not disassemble or throw the product into fire or water to avoid short circuit.
- Do not use wireless charger in extremely hot, humid or corrosive environment.
- Make sure there are no any metal, pop rings, credit cards or magnetic interference charges.
- Keep out of reach of children and pets.
- If the charging station overheats and stops charging during use, please remove the charging device and try charging after cooling down.
- Avoid dropping the product from high place.
Package List
- Wireless charger * 1
- Type-C charging cable * 1
- User manual * 1
All products brands and trademarks are property of their respective owners.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:
- This device may not cause harmful interference,and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in residential installation. This equipment generates uses and can radiate radio frequency energy and.if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However,there is noguarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing perfomed in typical operating conditions, where a person is no closer than 20 centimetres from the device surface at all times,except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.
IC Warning
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The equipment meets the ISED radiation exposure limits set for an uncontrolled environment. During the operation of the device, a distance of 10cm should be kept around the device and above the top surface of the device.