AI-Link WF-M920T-USX1 Wireless WiFi 6 LAN Bluetooth 5.2 Combo Module Instruction Manual
- June 1, 2024
- AI-LINK
Table of Contents
WF-M920T-USX1 Wireless WiFi 6 LAN Bluetooth 5.2 Combo Module
“`html
Specifications
-
Model: WF-M920T-USX1
-
Wireless Standards: IEEE 802.11 a/b/g/n/ac/ax,
Bluetooth V2.1/4.2/5.2 -
SoC: MT7920TUN
-
Product Weight: 3 g
Product Information
The WF-M920T-USX1 is a 2×2 WiFi 6 Wireless LAN and Bluetooth 5.2
Combo Module developed by Sichuan AI-Link Technology Co., Ltd. It
supports IEEE 802.11 a/b/g/n/ac/ax standards and features the SoC
MT7920TUN for robust wireless connectivity.
Features
WLAN:
-
Compliant with IEEE 802.11 a/b/g/n/ac/ax
-
Dual-band operation with data rate up to 1201Mbps
-
Supports various bandwidths and modes
-
Includes MU-MIMO, MU-OFDMA, STBC, LDPC, and Beamforming
technologies -
Security features include WPA/WPA2/WPA3 support
-
Quality of Service (QoS) support with WMM and WMM PS
Bluetooth:
-
Bluetooth v5.2 with BLE support
-
Dual-mode operation with wide-band speech support
-
Packet Loss Concealment (PLC) function for improved voice
quality -
Secure connections with AES128 and ECC256 encryption
Product Usage Instructions
Installation
-
Ensure your device is powered off before installation.
-
Locate an available PCIe slot on your device.
-
Carefully insert the WF-M920T-USX1 module into the PCIe
slot. -
Secure the module in place by fastening any screws or clips
provided. -
Power on your device and proceed with driver installation if
necessary.
Configuration
To configure the module, you may need to access your device’s
network settings and select the WF-M920T-USX1 as the preferred
wireless network adapter. Follow the on-screen instructions to
complete the configuration process.
Troubleshooting
If you encounter connectivity issues or performance problems,
try updating the drivers for the module or contacting technical
support for further assistance.
FAQ
Q: Can I use this module with older WiFi standards?
A: Yes, the WF-M920T-USX1 is compatible with IEEE 802.11
a/b/g/n/ac standards in addition to the latest ax standard.
Q: How can I ensure a secure connection over Bluetooth?
A: You can enable secure connections with AES128 and ECC256
encryption supported by the Bluetooth v5.2 feature of the
module.
“`
Datasheet | 2022
Model WF-M920T-USX1 Datasheet
IEEE 802.11 2×2 WiFi 6 Wireless LAN and
Bluetooth 5.2 Combo Module
[SoC MT7920TUN] for 802.11a/b/g/n/ac/ax + Bluetooth 5.2
Version 1.1
Datasheet | 2022
The information and data contained herein is subject to change without notice.
While every possible precaution has been taken in the production of this
document, it may still contain technical inaccuracies, omissions, and
typographical errors, and AI-Link, the document owner, is under no obligation
to update or otherwise correct this information. Sichuan AI-Link Technology
Co., Ltd. makes no representations or warranties concerning the accuracy or
completeness of the contents of this document and assumes no liability of any
kind, including the implied warranties of non-infringement, merchantability,
or fitness for purposes, concerning the operation or use of AI-Link hardware,
software or other products described herein.
No license to any intellectual property rights is granted by this document.
Terms and limitations applicable to the purchase or use of AI-Link’s products
are outlined in a signed agreement between the parties or AI-Link’s standard
terms and conditions of sales.
Any unauthorized copying, alteration, distribution, transmission, performance,
display, or other use of this document is strictly prohibited. Reverse
engineering or disassembly is also prohibited.
Trademarks
,
are trademarks of Sichuan AI-Link Technology Co., Ltd. Other
product names used in this document are for identification purposes only and
may be trademarks of their respective companies or entities.
Datasheet | 2022
Below Space Intentionally Left Blank for Customer Confirmation or Comments
Typed Name
Signature
Date
Please sign and return this page and the front page to our company by email or fax, or by courier to the following address:
Address Anzhou Industrial Park, Mianyang, Sichuan, P.R.C Company Sichuan AI- Link Technology Co., Ltd.
Module Name
WF-M920T-USX1
Designed by
Reviewed by
Approved by
Signature HUANG, Wei
FAN, Xijun
DING, Shuangpeng
Date
05/15/2022
05/15/2022
05/15/2022
[AI-Link Confidential] Model WF-M920T-USX1
WF-M920T-USX1
Compatible WLAN Standards IEEE Std. 802.11 a/b/g/n/ac/ax Bluetooth
V2.1/4.2/5.2
SoC MT7920TUN
Product Size 23mm×30mm×2.6mm
Product Weight 3 g
Sichuan AI-Link Technology Co., Ltd. Anzhou Industrial Park, Mianyang, Sichuan, P.R.C +86-0816-2438701 http://www.ailinkiot.com ai-link@ailinkiot.com
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 4 ~
[AI-Link Confidential] Features
WF-M920T-USX1
WLAN
IEEE 802.11 a/b/g/n/ac/ax compliant Support 20MHz, 40MHz, 80Mhz bandwidth in
2.4GHz,5GHz band Dual bands 2T2R mode data rate up to 1201Mbps with
USB3.0(2.5Gbps) Support MU-MIMO RX Support uplink MU-OFDMA TX and downlink MU-
OFDMA RX Support STBC, LDPC, TX Beamformer, and RX Beamformer Greenfield,
mixed-mode, legacy modes support IEEE 802.11 d/e/h/i/j/k/mc/r/v/w support
Security support for WFA WPA/WPA2/WPA3 personal, WPS2.0, WAPI QoS support of
WFA WMM,WMM PS
Bluetooth
Bluetooth v5.2 with BLE (BT low energy) Supports BT/BLE dual mode Supports BT
/Wi-Fi coexistence Supports SCO and eSCO link with re-transmission Supports
wide-band speech Supports mSBC and SBC including mono and stereo Supports
Packet Loss Concealment (PLC) function for better voice quality Supports LE
Isochronous channels Supports LC3 including mono and stereo Supports secure
connection with AES128 and ECC256 Channel quality-is drove data rate
adaptation Channel assessment and WB RSSI for AFH
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 5 ~
[AI-Link Confidential]
WF-M920T-USX1
Revision Record
Revision
Date
V0.1 9/5/2022 V0.2 9/26/2022 V0.3 10/25/2022 V0.4 11/15/2022 V0.5 12/6/2022 V1.0 01/05/2023 V1.1 05/15/2023 * Private Preview Only
Description
Premier Release Add pictures
Update target power Modify the 38th pin define
Modify output power Add SRRC ID Add sequence
Edited by
HUANG, Wei HUANG, Wei HUANG, Wei HUANG, Wei HUANG, Wei HUANG, Wei HUANG, Wei
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 6 ~
[AI-Link Confidential]
Contents
WF-M920T-USX1
1 General Description ……………………………………………………………………………….. 8 1.1 System Overview
……………………………………………………………………………………………………………….8 1.2 System Properties
……………………………………………………………………………………………………………..8 1.3
Diagram………………………………………………………………………………………………………………………………9
2 Mechanical Dimensions ……………………………………………………………………….. 10 2.1 Mechanical
Outline Drawing ………………………………………………………………………………………… 10 2.2 Pin definitions
…………………………………………………………………………………………………………………. 10 2.4 Product Photos
………………………………………………………………………………………………………………. 11 2.5 Label Information
…………………………………………………………………………………………………………… 12
3 RF Characteristics………………………………………………………………………………….12 3.1 Wi-Fi
Subsystem…………………………………………………………………………………………………………….. 12 3.2 Bluetooth
Subsystem …………………………………………………………………………………………………….. 14
4 Interface ……………………………………………………………………………………………….14 4.2 USB Interface
………………………………………………………………………………………………………………….. 14
5 Electrical Current Consumption ……………………………………………………………. 15 5.1 WLAN Current
Consumption ……………………………………………………………………………………….. 15 5.2 Bluetooth Current
Consumption …………………………………………………………………………………. 15
6 Software Information……………………………………………………………………………15 6.1 RF
Driver………………………………………………………………………………………………………………………….. 15 6.2 Normal
Driver…………………………………………………………………………………………………………………. 15
7 Reference Design …………………………………………………………………………………. 16 7.1 Recommend PCB
Layout Decal……………………………………………………………………………………. 16
8 Timing Diagram …………………………………………………………………………………… 17 8.1 Chip power on
sequence ……………………………………………………………………………….. 17 8.2 Reset
sequence………………………………………………………………………………………………… 18
9 RF Connector Dimension ……………………………………………………………………… 18 10 Package, Storage &
Disposal ……………………………………………………………….. 19
10.1 Package …………………………………………………………………………………………………………………………. 19 10.2 Storage
………………………………………………………………………………………………………………………….. 20 9.3 Disposal
…………………………………………………………………………………………………………………………… 20
11 Appendix ……………………………………………………………………………………………… 20 12 Refelow Standard
Condition ………………………………………………………………… 21 13 Certification
Information:……………………………………………………………………..21
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 7 ~
[AI-Link Confidential] 1 General Description
WF-M920T-USX1
1.1 System Overview Model WF-M920T-USX1is a highly integrated WiFi module by AI-Link, based on the MediaTek SoC MT7920TUN, featuring a 2×2 a/b/g/n/ac/ax dual-band Wi-Fi, and a Bluetooth v5.2 subsystems.
The finely tuned hardware architecture and baseband algorithms provide superlative RF performance, as well as low power consumption. Intelligent MAC design powers a highly efficient offload engine; the hardware supports standard features of higher level of security, performance, and conforms most international regulations, offering the great performance at any time, in any circumstance.
1.2 System Properties
Dimension Typically, 23mm x 30mm x 2.6mm
Chipset MT7920TUN
Operating 2.4GHz:2.412~2.462 GHz Frequency 5 GHz5.180~5.825GHz
Antenna 3 IPEX Connector
Operating 3.3V±5%
Voltage
PCB 4-layers design (0.8+/-0.15mm)
Information
Peripheral Interface
WIFI&BT@USB NoteUSB uses frequency reduction processing, the rate is 2.5Gbps
Rate
11b: 1, 2, 5.5 and 11Mbps 11a/g: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps 11n: MCS0~15, up to 300Mbps 11ac: MCS0~9, Nss=2, BW=80MHz up to 866.7Mbps 11ax: MCS0~11, Nss=2, BW=40MHz up to 573.5Mbps 11ax: MCS0~11, Nss=2, BW=80MHz up to 1201Mbps
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 8 ~
[AI-Link Confidential]
Operating -10 to +70
Temperature
Storage -40 to +85
Temperature
ESD Protection
HBM IO:2000V RF:6000V
WF-M920T-USX1
1.3 Diagram The hardware architecture for the module is shown in Figure 1. The AILink’s WF-M920T-USX1module Complies with IEEE standards 802.11a/b/g/n/ac/ax; it also supports 2×2 Multi-User Multiple-Input Multiple-Output (known as MU- MIMO) and could reach up to data rate of 1201 Mbps. Meanwhile, it is also a module of Bluetooth v5.2 and WiFi Dual-band.
Figure 1: WF-M920T-USX1Block Diagram
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 9 ~
[AI-Link Confidential] 2 Mechanical Dimensions
WF-M920T-USX1
2.1 Mechanical Outline Drawing Typical Dimension (W x L x T): 23.0mmx 30.0mm x 2.6mm General tolerance: ±0.2mm PCB Thickness: 0.8mm (+/-0.15mm)
Top View 2.2 Pin definitions
Bottom View
Pin Define
1
DBG_TX
2
NC
3
GND
4
NC
5
NC
6
GND
7
RESET
8
GND
Description
DEBUG, WIFI FW LOG, Uart Tx GPIO13 Not connect GND Not connect Not connect GND
Pin Define
31 GND
32 USB DP 33 USB DM 34 GND 35 NC 36 BT WAKE
PMU RESET, 10K 37 BT stereo
GND
38 GPIO12
9
GND
10 3.3V
11 3.3V
12 GND
GND
39
POWER 2A 40
5%
POWER 2A 41
5%
GND
42
All rights reserved © Sichuan AI-Link Technology Co., Ltd
GND NC
UART_RTS
UART_RX
Description
GND
USB2.0 data D+ USB2.0 data DGND Not connect GPIO0, , 10K GPIO3, BT
Timing Synchronization Function(TSF) GND Not connect
GPIO11
GPIO14
~ 10 ~
[AI-Link Confidential]
WF-M920T-USX1
13 NC
Not connect
43
14 NC
Not connect
44
15 PCM_SYNC GPIO6, PCM SYNC
45
16 PCM_OUT GPIO7, PCM OUT
46
17 GND
GND
47
18 WIFI WAKE GPIO1, WIFI , 10K
48
.
19 PCM CLK
GPIO10, PCM CLK
49
20 PCM_IN
GPIO8, PCM IN
50
21 NC
Not connect
51
22 GND 23 U3-TXN
24 U3-TXP
GND
52
USB3.0 TXN, RXN.
53
USB3.0
2.5Gbps
USB3.0 TXP, RXP.
54
USB3.0
2.5Gbps
25 GND
GND
55
26 NC
Not connect
56
27 NC
Not connect
57
28 GND 29 U3-RXN
30 U3-RXP
GND
58
USB3.0 RXN, TXN.
59
USB3.0
2.5Gbps
USB3.0 RXP, TXP.
USB3.0
2.5Gbps
2.4 Product Photos
UART_TX GND GND DBG_TX
NC GND
NC GND GND NC GND
GND
NC GND GND NC GND
GPIO15 GND GND DEBUG, BT FW LOG, Uart Tx GPIO4 Not connect GND
Not connect GND GND Not connect GND
GND
Not connect GND GND Not connect GND
TOP View
BOT View
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 11 ~
[AI-Link Confidential] 2.5 Label Information Top Label
WF-M920T-USX1
3 RF Characteristics
WIFI MAC information DM code Part numberWF-M920T-USX1 SRRC ID Company
information
BT Mac =WIFI Mac + 1
3.1 Wi-Fi Subsystem
Items
Contents
WLAN Standard
IEEE 802.11a/b/g/n/ac/ax
Frequency
2.400 GHz ~ 2.483.5 GHz (2.4 GHz)
Range
5.150 GHz~5.850 GHz (5 GHz)
Channels
CH1 to CH11 @ 2.4G CH36 to CH165 @ 5G
802.11b: DBPSK, DQPSK ,CCK
Modulation Mode
802.11 a/g/n: BPSK, QPSK, 16QAM, 64QAM 802.11 ac: BPSK, QPSK, 16QAM, 64QAM,256QAM 11ax: BPSK, QPSK, 16QAM,
64QAM,256QAM,1024QAM
Power Value
EVM
802.11b /11Mbps: 16dBm±2
-10dB
Output Power 802.11g /54Mbps: 15dBm±2
-25dB
Min& EVM 802.11a /54Mbps: 15dBm±2
-25dB
802.11n HT20 /MCS7: @2.4G 14dBm±2 -28dB
802.11n HT20 /MCS7: @5G 14dBm±2
-28dB
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 12 ~
[AI-Link Confidential]
WF-M920T-USX1
Items
Receiver Sensitivity @2.4G PER 10% @5G PER 10%
Contents 802.11n HT40 /MCS7: @2.4G 14dBm±2 802.11n HT40 /MCS7: @5G 14dBm±2 802.11ac VHT20 /MCS8: @5G 14dBm±2 802.11ac VHT40 /MCS9: @5G 13dBm±2 802.11ac VHT80 /MCS9: @5G 13dBm±2 802.11ax HE20 /MCS11: @2.4G 13dBm±2 802.11ax HE20 /MCS11: @5G 12 dBm±2 802.11ax HE40 /MCS11: @2.4G 13dBm±2 802.11ax HE40 /MCS11: @5G 12 dBm±2 802.11ax HE80 /MCS11: @5G 12 dBm±2 Rate Type 802.11b /11Mbps @2.4G PER8% 802.11g /54Mbps @2.4G 802.11a /54Mbps @5G 802.11n HT20 /MCS7 @2.4G 802.11n HT20 /MCS7 @5G 802.11n HT40 /MCS7 @2.4G 802.11n HT40 /MCS7 @5G 802.11ac VHT20 /MCS8 @5G 802.11ac VHT40 /MCS9 @5G 802.11ac VHT80 /MCS9 @5G 802.11ax HE20 /MCS11 @2.4G 802.11ax HE20 /MCS11 @5G 802.11ax HE40 /MCS11 @2.4G 802.11ax HE40 /MCS11 @5G 802.11ax HE80 /MCS11 @5G
-28dB -28dB -32dB -32dB -32dB -35dB -35dB -35dB -35dB -35dB Max -85dBm -72dBm -71dBm -68dBm -68dBm -67dBm -67dBm -64dBm -58dBm -56dBm -57dBm -57dBm -55dBm -55dBm -51dBm
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 13 ~
[AI-Link Confidential]
WF-M920T-USX1
3.2 Bluetooth Subsystem
Items
Contents
Host Interface USB
TX Characteristics
Channel
BREDR:CH0 toCH78 LE:CH0 to CH39
Modulation
GFSK/4-DQPSK 8PSK
Rate Type
Min(dBm) Typ(dBm) Max(dBm)
1DH5
4
8
12
TX Power
2DH5 3DH5
4
8
12
4
8
12
1LE
4
8
12
2LE
4
8
12
RX Characteristics
Rate Type
Min(dBm) Typ(dBm) Max(dBm)
1DH5 BER<0.1%
-92
-70
2DH5
-90
-70
RX
BER<0.01%
3DH5 BER<0.01%
-85
-70
1LE PER<30.8%
-92
-70
2LE PER<30.8%
-89
-70
- Note: [1] Typical RF Output Power are tested at room temp.25
4 Interface
4.2 USB Interface The module supports the USB (USB v3.0 specification) device
port, Use USB as the host interface for Bluetooth. And USB uses frequency
reduction processing, the rate is 2.5Gbps.
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 14 ~
[AI-Link Confidential] 5 Electrical Current Consumption
5.1 WLAN Current Consumption Description
Power Consumption WIFI TX Power ConsumptionWIFI RX
WF-M920T-USX1
Value 898 186
Unit mA mA
*Note:
[1] Results are measured provided VDD33 is 3.3V. TX power is measured
at the antenna port. The temperature is 25oC.
[2] The duty cycle for TX/RX measurement is 100%. [3] The chip variation is +/- 25%.
5.2 Bluetooth Current Consumption
Description
Value Unit
Power ConsumptionBT TX
88
mA
Power ConsumptionBT RX
27
mA
*Note: [1] Results are measured provided VDD33 is 3.3V. TX power is measured at the antenna port. The temperature is 25oC. [2] The duty cycle for TX/RX measurement is 100%. [3] The chip variation is +/- 25%
6 Software Information
6.1 RF Driver QAtool 6.2 Normal Driver Linux
*Note: The software (driver) package version is subject to change without notice because it may encounter several updates. It is advised to consult with AI-Link for the best right driver package.
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 15 ~
[AI-Link Confidential] 7 Reference Design
7.1 Recommend PCB Layout Decal
WF-M920T-USX1
TOP VIEW
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 16 ~
[AI-Link Confidential] 8 Timing Diagram
8.1 Chip power on sequence
WF-M920T-USX1
RESET(PMU_EN) 3.3V
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 17 ~
[AI-Link Confidential] 8.2 Reset sequence
WF-M920T-USX1
9 RF Connector Dimension
Figure 2: The dimensions of the connector
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 18 ~
[AI-Link Confidential] 10 Package, Storage & Disposal
10.1 Package
WF-M920T-USX1
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 19 ~
[AI-Link Confidential]
WF-M920T-USX1
10.2 Storage All electronic components must be stored in a clean, well-
ventilated place free of corrosive gas. Unless otherwise specified, the
temperature and humidity of the storage place must meet below requirements:
Temperature-40~85 Humidity20%~75% Humidity sensitivity grade MSL 3 Container
Requirement: products shall be placed in a container wellfunctioning as an
electrostatic shielding.
9.3 Disposal The waste disposal of this product and the package should comply with the applicable local/regional /state/ international regulations.
11 Appendix
N Name
O. 1 IC
Key Components List
Model
Specification
MT7920TUN
2 PCB JUI7.820.1332 series
4L 0.8mm
3 Crystal
3225 40M
3225 40M
Manufacturer
MediaTek KX IQE
Sunlord RJX
Hosonic ECEC TKD
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 20 ~
[AI-Link Confidential] 12 Refelow Standard Condition
WF-M920T-USX1
Heating zone: temperature: < 150 °C, time: between 60 and 90 seconds, the
slope is controlled between 1 ~ 3 °C / S. Preheating constant temperature
zone: temperature: 150 °C ~ 200 °C, time: between 60-120 seconds, slope
between 0.3-0.8. Reflow soldering area: peak temperature 235 °C ~ 250 °C
(recommended peak temperature < 245 °C), time 30-70 seconds. Cold area:
temperature: 217 °C ~ 170 °C, slope between 3 ~ 5 °C / S. The solder is lead-
free solder in tin-silver copper alloys/Sn&Ag&Cu Lead-free solder (SAC305).
13 Certification Information:
This product is a radio transmitter module for restricted non-standalone
operation. The module bearing CMIIT ID:2022AP19235(M) approval does not mean
that the final equipment in which the module is embedded or used complies with
relevant radio management technical regulations or standards. The final
equipment of the specific manufacturer is responsible for the technical
compliance with the relative local or nationwide radio management technical
regulations or standards.
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 21 ~
[AI-Link Confidential]
WF-M920T-USX1
FCC regulatory compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Warning: changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This Module complies
with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.
Labelling Instruction for Host Product Integrator Please notice that if the
FCC identification number is not visible when the module is installed inside
another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module. This
exterior label can use wording such as the following: “Contains FCC ID: 2AOKI-
WFM920TUSX1” any similar wording that expresses the same meaning may be used.
Installation Notice to Host Product Manufacturer The OEM integrator is
responsible for ensuring that the end-user has no manual instruction to remove
or install module. The module is limited to installation in mobile
application, a separate approval is required for all other operating
configurations, including portable configurations with respect to §2.1093 and
difference antenna configurations.
Antenna Change Notice to Host manufacturer If you desire to increase antenna
gain and either change antenna type or use same antenna type certified, a
Class II permissive change application is required to be filed by us, or you
(host manufacturer) can take responsibility through the change in FCC ID (new
application) procedure followed by a Class II permissive change application.
FCC other Parts, Part 15B Compliance Requirements for Host product
manufacturer This modular transmitter is only FCC authorized for the specific
rule parts listed on our grant, host product manufacturer is responsible for
compliance to any other FCC rules that apply to the host not covered by the
modular transmitter grant of certification.
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 22 ~
[AI-Link Confidential]
WF-M920T-USX1
Host manufacturer in any case shall ensure host product which is installed and operating with the module is in compliant with Part 15B requirements.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: –Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver. –Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 23 ~
[AI-Link Confidential]
WF-M920T-USX1
ISED Regulatory Compliance
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1 )This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1)L’appareil ne doit pas produire de brouillage; (2)L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator and your body.
Cet équipement est conforme aux limites d’exposition aux radiations IC CNR-102
établies pour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec une distance minimale de 20cm entre le radiateur et votre
corps.
Please notice that if the IC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains IC: 23460-WFM920TUSX1” any similar wording that expresses the same meaning may be used. L’étiquette d’homologation d’un module d’Innovation, Sciences et Développement économique Canada devra être posée sur le produit hôte à un endroit bien en vue, en tout temps. En l’absence d’étiquette, le produit hôte doit porter une étiquette sur laquelle figure le numéro d’homologation du module d’Innovation, Sciences et Développement économique Canada, précédé
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 24 ~
[AI-Link Confidential]
WF-M920T-USX1
du mot « contient », ou d’une formulation similaire allant dans le même sens et qui va comme suit : Contient IC: 23460-WFM920TUSX1est le numéro d’homologation du module.
i. the device for operation in the band 51505250 MHz is only for indoor use
to reduce the potential for harmful interference to co-channel mobile
satellite systems;
ii. for devices with detachable antenna(s), the maximum antenna gain permitted
for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that
the equipment still complies with the e.i.r.p. limit;
iii. for devices with detachable antenna(s), the maximum antenna gain
permitted for devices in the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as appropriate; and
i. le dispositif utilisé dans la bande 5150-5250 MHz est réservé à une
utilisation en intérieur afin de réduire le risque de brouillage préjudiciable
aux systèmes mobiles par satellite dans le même canal;
ii. pour les dispositifs à antenne (s) détachable (s), le gain d’antenne
maximal autorisé pour les dispositifs dans les bandes 5250-5350 MHz et
54705725 MHz doit être tel que l’équipement soit toujours conforme à la norme
e.i.r.p. limite;
iii. pour les dispositifs à antenne (s) détachable (s), le gain d’antenne
maximal autorisé pour les dispositifs de la bande 5725-5850 MHz doit être tel
que l’équipement soit toujours conforme à la norme e.i.r.p. les limites, le
cas éché ant; et
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 25 ~
[AI-Link Confidential]
WF-M920T-USX1
The requirement for KDB 996369 D03:
1.1 List of applicable FCC rules FCC Part 15.247, FCC Part 15.407.
1.2 Summarize the specific operational use conditions EUT use PIFA antenna.
1.3 Limited module procedures The module is a single module, so this requirement is not applicable to the product.
1.4. Trace antenna desig Not support
1.5 RF exposure considerations The host device can be used as mobile device.
1.6 Antennas 2.4G
PIFA antenna :3.66dBi maxExternal type 5G
PIFA antenna :3.55dBi maxExternal type
1.7 Label and compliance information If this certified module is installed inside the host device, then the outside of the host must be labeled with “Contains FCC ID: 2AOKI-WFM920TUSX1
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 26 ~
[AI-Link Confidential] .
WF-M920T-USX1
1.8 Information on test modes and additional testing requirements
The host manufacturer can use the software of MT7961 QA to make the WIFI
transmit continuously.
1.9. Additional testing, Part 15 Subpart B disclaimer The module only complies with the FCC Part 15.247 and 15.407. If the module is installed in the host device, the host manufacturer is responsible for the compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. For example, if the host manufacturer markets their product as being Part 15 Subpart B compliant (when it also contains unintentional- radiator digital circuity), then the host manufacturer shall provide a notice stating that the final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.
– Below Space Intentionally Left Blank
All rights reserved © Sichuan AI-Link Technology Co., Ltd
~ 27 ~